HP quality Center AE100 cisco wireless network adapter loses its connection
IPsec interferes with the adapter. connections.
Is it via a VPN connection?
If this isn't the case, please provide more information.
Also try this walk through:
http://support.Microsoft.com/kb/314076
B Eddie
Tags: Windows
Similar Questions
-
Continuous wireless network adapter lose its network connection
It used to work very well in the beginning, but after a many windows updates, my laptop has started to lose the Wi - Fi connection every several minutes.
Windows troubleshooting utility usually fixes the problem of reset wireless network card. Sometimes, however, it does not set it up that I restart the PC.
The issue is not with a router because I have experience with different wifi too.
I have Toshiba Satellite laptop computer with Windows 7 and Realtek RTL8723AE wireless adapter.
Here is an example of this that convenience store says:
Helper class: Layer2 Security
Initialize status: successResult of diagnosis: problem found
Root cause:
Windows cannot connect to "mywifi".
The wireless network security key is not correct.Detailed root cause:
Layer 2 security key exchange using the key provided by the user did not generate unicast keys before timeoutRepair option:
Check the key to network security for "mywifi".
View the security settings. You can then type the correct security key.Information for a diagnosis of connection
Interface GUID: {b63a89ca-8412-49ed-9619-ab7f3dfa4504}
Interface name: Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC
Interface type: Native WiFi
Profile: lazarfox
SSID: mywifi
SSID length: 8
Connection mode: Infra
Security is enabled: Yes
Login ID: 7
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: Yes
Status of Pre-association and association: success
Security and authentication:
Configured security type: robust network security (ARS / WPA2) for independent networks
Configured encryption type: CCMP (AES)
Security connect status: 0 x 00048005 failure
Number of security packets received: 0
Number of security packets sent: 0
802.1 x protocol: No.
Key exchange initiated: Yes
Unicast keys received: No.
Multicast keys received: No.... I suggest you to update BIOS, chipset and wireless network drivers these links and check if it helps...
Hi, Yann,
I updated the driver, but it did not help. Update the chipset has probably not because I have AMD (the update says that I don't have the required devices). BIOS has been updated some time (I have the latest).
I also searched other topics and did the following:
Disabled IP assistance service;
Value another configurtion IP: manual and entered a fixed IP address and the default gateway.
Turned off the Windows Firewall for this network.
The problem seems went, at least for now, although I don't know what stage did.
-
dead dv6439nr wireless network adapter
Description of the basic problem:
A few days ago, I wake my computer from sleep to find that I couldn't connect to my home wireless network.Detailed problem description:
My WiFi is not listed in network connections.
The wireless device is not listed under devices in Device Manager, or it is in any of the other categories, and there is no "Other devices" category now to check.
HP Wireless Assistant does not open. Trying to run it, HPWAMain.exe appears in the list of running processes for a while, then closes immediately.
I tried using the switch to toggle the wifi but got no results. The light is still orange and wireless has not reappeared in all.
I have tried reinstalling the drivers wireless (sp41675) but got no results.
I tried to boot in to an installation of Windows 7 which has worked the last time that I used a few weeks ago, but the wireless device is not detected in Device Manager or Windows 7 network connection.
After each new attempt to solve the problem, I have restarted but got no results.System information:
Product name: HP Pavilion dv6000
Model number: dv6439nr
Serial number: CNF7424JNJ
Product number: KA250UA #ABA
Warranty start date: 11/21/2007
BIOS version: F.40
Operating system: Windows Vista Home Premium (32 bit)
The old connection method: internal wireless
Current connection method: USB wireless
Error messages: no
Changes to the default hardware: no
Software Exchange default value: Dual boot Vista and Windows 7
Recent software changes: definition update for Windows Defender - KB915597, install date:? 6 / ? 22 /? 2009 12:30, Installation status: successIssues related to the:
My laptop is eligible free repair?Can I just send my adapter wireless for HP and ask them to send me a new?
My wireless card is labelled as "AS #: 418572-001 SPS #: 441090-001. An Ebay search for "441090-001" returns several cards of the same branded wireless network than mine and identical to mine in appearance. Instead of trying to get HP to fix my laptop should I buy a new wireless adapter and install it myself?
Users to read this, please answer the question if you have a relevant personal experience.
I read of clients receiving computers repaired HP with new damage (http://forums13.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=109447627+1245913498963+28353475&threadId=1143379), likely incurred during transport or repair of HP. After receiving a HP laptop repair, have you seen new scratches, dents, cracks, or other damage?I have my HP laptop, works perfectly.
To answer my own questions:
Yes, my cell phone was eligible for a free repair.
No, I couldn't send just the wireless network adapter (would have been a mistake anyway).
No, HP has not damaged my laptop.
I contacted HP and established that my laptop was entitled to repair to the title of "HP limited warranty extra Service. HP sent me a box with a prepaid FedEx label, and I sent them my laptop. Before sending to my HP laptop, I removed the hard drive; the low probability of my data get damaged was unacceptable; I have backed up my data, but that would have taken two days to USB data transfer speed. I got my laptop back to HP repair in the next few days and after a thorough inspection, I find no damage to the laptop caused by HP, if it was a lil dusty. For a while I thought I found a new crack loosed in a low service panels, but after looking at the photos I had taken before sending the laptop I found that the crack is not new, so Bravo to HP.
With the laptop repaired, HP sent a document that details the "motherboard" and 'Thermal Pad' had been replaced. I was curious to know exactly what work had been done, so I called HP and asked questions about spare parts references. The "motherboard" was part number 10MBZZZ0TPJ, which a Google search has this part is also known as 443775-001 and it costs about $190 to replace. The "thermal Pad" had JXAT3001010 part number, which I have found no info on.
CAVEAT! CAVEAT! NERD RANT!
Frankly, when I first called HP on the problem, the person I spoke to kept implying that it was the motherboard that needed to be replaced NOT the wireless network adapter, and I thought it was absurd; much more likely that it was a problem of component. Now that I have the confirmation that it was the motherboard, I am quite concerned that in about two years I'm going to need a different motherboard, and the "HP limited warranty extra Service" warranty only lasts for 90 days from now. Motherboard failure should be the exception, not the norm! I have several computers that are nine and ten years OLD and works very well when properly proposed. I have my grandmother using a desktop Dell Optiplex 2000 computer to check his e-mail. I have a Mac Powerbook from 1999 that I emulate video games and I'm using a ThinkPad IBM in 2002 as a jukebox for my Entertainment Center. A few months ago I was repairing 9 old Dell Optiplex (2000 vintage) offices, on the job had a bad motherboard VGA video and a keyboard bad connection PS/2; failure motherboard 22% after nine years! For the motherboard to miss my DV6000 since 2007 is ridiculous.skippyh2o:
Call HP. They will probably fix your problem for free.Harpaza
Why you reinstall vista in the first place? Have you tried to solve the problem with your wireless network card?If you have lost wireless once (first occurrence), reinstalled vista to try to solve the problem has got back wireless, and started to update and still lost wireless (second instance) then I would agree this is probably a software problem. If losing wireless after that resettlement was only the first occurrence of losing wireless, then maybe you should try re-reinstall. The point at which you lost wireless have actual hardware failure, it all depends on if you can get wireless back, willingly or by force. I knew my hardware problem and not software because I had an installation of Windows 7 that I knew worked very well, but still he could see my wireless network card.
In any case... Try calling HP. side of customer support call center jobs being outsourced in India, I must say that I am satisfied with the HP Technology Support; Although I'd be quite satisfied with the quality of their product!
-
I bought aspire V3 - 574 G-54VY a month back. It runs on windpws 10 64-bit. There is a problem with the Qualcomm Atheros QCA61x4 Wireless Network Adapter. Whenever I update the driver to version 12.0.0.116 I face extremely slow internet. But when I go back to the previous version of the driver 4.0.0.115 i.e., the speed is correct. Can someone help me with this issue, because I'm not able to determine whether or not I have a defective laptop. The center of same service replaced the wifi card, but always the same question comes up. Thanks in advance.
Hi guys Finally I found the problem with the help of a technician
The problem was with power settings. When the laptop is plugged in, he took the full speed and slow battery mode. The solution is:
Goto settings-> system-> power and sleep-> additional power settings-> settings of plan (plan selected)
OR
Search for Goto-> type Control Panel-> hardware and sound-> Power Options->-> change the parameters of the plan (plan selected)
Then
change power settings advance-> adapter settings-> power saving mode-> Set battery maximum performance wireless
Check your speed now (if necessary reboot)
I am now using the updated driver 12.0.0.191 and internet high speed is correct.
-
Wireless network adapter could not be activated
My laptop also did EXACTLY the same thing in the morning today.No effect with the wireless on switch on the computer. The light is always red. Last night an automatic update that happened (update for windows Vista (KB955430) 09/05/2009 09:03), which cannot be deleted. I don't know if this problem is related with the update.My laptop is HP Pavilion dv6439nr. Running Windows Vista Home Premium (Service Pack 1). Wireless adapter is "broadcom wireless 802.11 b/g WLAN PCI" that is gone now.Windows network diagnostics shows "this computer doesn't have a card installed and configured wireless network."HP Home Network Center shows "Wireless status: disabled; When I try to enable wireless LAN, it shows "wireless network adapter could not be activated.I tried to scan and reinstall the driver but the device does not appear.The wireless router works fine with other laptops.If anyone has a solution it would be greatly appreciated.Thank youAlboury,
It seems at this point that your wireless network adapter has a hardware problem. Check out this troubleshooting guide step by step on the HP Pavilion support web site. If you can't get your active wireless card, you will need to contact HP or repair HP authorized repair for hardware Center.Let us know if we can provide assistance.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Wireless network adapter is not installed and configured
I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you
You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.
The adapter is inside the laptop. You don't need to do something with it to install it. Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install". You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections. This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).
Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.
Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network. If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).
Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.
Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.
Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.
Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.
Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.
As I am unsure of your Setup, I've included several items that can help depending on how you are setup.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Wireless network adapter give messege error HELP ASAP!
When I try to connect to the network wirelessly around me, it gives me the following message: "the ability of your network adapter does not match the requirments of this network". What should I do I have Windows 7 Enterprise and my network adapter's: D-Link DWL-G510 high speed 2.4 GHz 802.11 g PCI Wireless Network Adapter.What should I do how can I solve the problem please HELP ASAP! Thanks PSI HAD NO PROBLEMS USING the ADAPTER IN WINDOWS XP IT WOULD CONNECT to all THE NETWORKS BUT IN WINDOWS 7 IS THE PROBLEM!
Have you checked under the adapters advanced properties wireless?
The network and sharing Center, click on change settings card, right click on wireless network connection and then go to properties. In the Properties window, click on the button set up and pull the top of the Advanced tab.
You should get options here to set the mode (a, b, g) among others.
You know the settings of the wireless network you want to join?
-
Windows 8 problem with wireless network adapter
I had a lot of trouble to stay connected to the internet with my college wireless network on
my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:
Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra
-91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s) Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem
Diagnostic information (wireless network adapter)Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem
Thanks for any help! It happened for about eight months and it's really frustrating.
Hello
Check with Dell and Broadcom, their documentation diagnostics online and drivers.
and ask questions in the forums about known problems. The two Dell driver update, then
Broadcom if there is more recent.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
Broadcom - downloads and Customer Support
http://www.Broadcom.com/support/==============================
More troubleshooting:
It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
HP Pavilion Slimline s5510y of: No. Wireless Network Adapter installed
I just bought a Pavilion Slimline S5510Y Desktop opportunity; not an installed wireless network adapter. Y at - it somewhere that I can download the map?
Here is the PAGE of SUPPORT for this office. It doesn't have a wireless adapter. It has a wired aka the installed ethernet card. The wireless adapter is a piece of hardware and must be purchased, not downloaded. There are choices in the type would work better for you - USB or PCI x 1. It may depend on the type of network you want to use. The new highspeed options may require an adapter corresponding to the specification of network router in order to achieve faster speeds of the AC. If you look at the "n" speeds then most can do. Also be aware of the bands 2.4 and 5 GHz for newer routers. If all this sounds "Greek", then perhaps seek help from a friend.
-
Disabled wireless network adapter
The wireless network adapter in my desktop Pavilion (WE167AA under Windows 7 Home Premium) maintains have turned off. This can be fixed about half of the time by running the troubleshooter from network problems, but the rest of the time, the PC freezes during troubleshooting.
The problem occurred only in the last two weeks, after nearly four years of perfect operation. I have no manual changes to configurations. Unfortunately I do not have a system restore point from before the show began. Performance on other wireless devices in the same room are very good, so I don't know that this is not a problem with the wireless itself.Hello @irpcoldicott,
I understand that you are having problems with your drivers for your HP Pavilion p6320uk Desktop PC WiFi keep turning off. I provided you with the Original Ralink Wireless Networking Controller Driver, which is the WiFi driver for your computer running Windows 7. I suggest download you and follow the steps below:
Step 1. Click Start
Step 2. Click on Control Panel
Step 3. Click on Device Manager
Step 4. Click on network adapters
Step 5. Right-click on your Ralink Wireless Adapter
Step 6. Click on uninstall
Don't forget to remove the driver
Step 7. Now install the downloaded Original Ralink Wireless Networking Controller Driver previously.
Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!
-
Satellite Pro A660 - wireless network adapter issues
Hi guys hope you can help!
I have a Satellite Pro A660 - 11 M Windows 7-64 bit
The wireless network adapter does not work...
I tried to reinstall the bios and the driver wireless.
The wireless button is lit to Yes as the key Fn + F8 doesn't show not relevant wifi is turned on/off as usual!
It shows also in the Device Manager and BIOS.
Is there something I missed? Or is it a faulty card?Hello
> It shows also in the Device Manager and BIOS.
First of all, you won't find any WLan entries in the BIOS.
But you should see the local network card in Device Manager.
If good WLan driver has been installed, the local network adapter device should appear in devices-> network cards Manager.If WLan driver has not been installed properly, you'd still see an entry under network adapters, but it should appear as unknown device or Ethernet controller.
You can this inscription?In addition, the WLan driver was released on the Toshiba UE driver page.
The question is; have you chosen the right Wlan driver.
As much as I know that the laptop supports the BROADCOM 802.11(B/G/N) BCM94313 WLan card and, as a result, Broadcom Wlan driver should be used. -
Hi all
2.5 years ago I bought L-750d-159:
Video: AMD Radeon HD 6520G (TM)
Wireless: Atheros AR9002WB-1NG wireless network adapter
CPU: AMD A6 - 3400 M APU with graphics Radeon (TM) HD
RAM: 4 GB
OS: Windows 7 Home Edition SP1, 64-bit.
BIOS: 2.1For the majority of the last 2.5 years I had the same questions, alternating between them over and over again without solution in sight.
Repetition of questions: *.
1. wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another. at the same time #2 arrives:2. cannot read USB (IE external HARD disk). allows you to restart.
3. wireless mouse does not respond. Randomly, reset help.
4 gel. Sometimes, when there is nothing running in the background. Of course, hard restart (only power button)
5. office freeze.not always, but if he gets in the mood, he could go the days where minutes after I start the 'word' it would just freeze. Hard reset again.
6. "atikmpag' blue screen. After not having it for a long time, I started just have it again.
7 power supply and battery issues:
7.1 with battery:
Suddenly load stops. disconnect and reconnect do not help.
Fresh only when the computer is turned off.7.2 without battery:
Instant stop. Usually when you use Chrome.These issues are alternating, everyday sense I get something else, without a prescription for them that I noticed.
* How to try to remedy: *.
1. updated all the drivers for the toshiba page.
[Page drivers Toshiba | http://www.toshiba.co.il/innovation/download_drivers_bios.jsp]2. update the BIOS. I do this cotton after having feeding problems, not so useful.
3. formatting and reinsalled Windows 7 to factory settings.
I am sure that there is a solution out there, the computer itself works fine for me (when it works) and I will not buy a new one, until it falls dead (I could give a year or two).
Are you guys famliar with these questions?
Here are the proven solutions for this model?
Post edited by: fish85
> 1. Wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another.
WLan problems could appear for different reasons. I don t think that it is a WLan driver problem. I think that you should just check the WiFi configuration.
For example, you should check whether changing the WiFi 1-11 channel would improve performance. Also change the settings for encryption (WPA/WP2-AES, TKIP) is worth trying.
Turn off all the settings for the WLan to save energy and check if there is a difference if you turn off the WLan mouse.> 2. Cannot read USB (IE external HARD disk). allows you to restart.
Also the issue of USB can be related to energy saving settings.
In the Device Manager-> USB Controllers-> properties-> tab power management option that allows the system to power off the device to save power.> blue screen "atikmpag. After not having it for a long time, I started just have it again.
This file/process is tied to the ATI graphics card. Try to use the latest graphics card driver. An update is recommended in this case.Battery issues:
Well, sooner or later each battery must be replaced. I put t know if your battery is malfunctioning but probably new battery would help to resolve the issue
In addition, to remove and uninstall the device control method battery Microsoft acpi located in Device Manager. -
Satellite L500-13z - Windows 7 does not recognize wireless network adapter
Hello
The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:
After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).
=>, Is there a way to know what is my Wifi adapter?
that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).
-Online someone knows when will be released Windows 7 drivers on the website?
Hello
Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
Need you an information like PCI\VEN_XXXX & DEV_XXXXIf you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
http://www.PCIDatabase.com/After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.Welcome them
-
Satellite U50D-A - need wireless network adapter driver
Hello
I have a Qualcomm Atheros AR956x wireless network adapter
status "this device cannot start (code 10)" exclamation mark = in side of the yellow triangle
so no wireless
OK Ethernet
Impossible to update via MS suspect this could cause problem in the first placetried to download from toshiba, but same website
tried to uninstall even
tried the 3rd driver manager advantage but only to see mobile as U500 not U50 (no provision)
Driver details
athwbx.sys file worm 10.0.0.301 latest version (looked in the sys32/victory/drivers date modified 17/10/14? 4.03 MB?) I think that download was 39 MB)
vwifibus.sys worm 6.3.9600.16384 fileI guess I could remove old and copy new download in one place
I was wondering if anyone has had the similar problemAny help appreciated
Thank you
DaveI found the page sheet of laptop here:
http://www.MyToshiba.com.au/products...specificationsBut unfortunately, the page provides no details on the integrated WLan module.
However, all the drivers are available here:
http://www.MyToshiba.com.au/support/...download?OS=32
and the Atheros WLan driver win 8.1 has the version number: 10.0.0.308 -
Satellite A200 - 1 M 4; What wireless network adapter is installed
Hello
I need help to identify the wireless network adapter for my laptop. Anyone know the type of card?
Best regards!As a first step, we need to identify your model of laptop. ;)
Please send us the model name and model number. You can find it on the gray label placed at the bottom of your laptop.
Maybe you are looking for
-
Can not save my iPhone 6 more for my iTunes
I updated my iTunes to the latest version and now I can't sync my phone for her. Can someone help me?
-
New iPhone 6s bought at the Qatar
My dear my doubts I bought the iPhone 6s in qatar, that it can support the face time India also how can identify
-
I want to reset my question in my apple ID * please help me
Please I need your help to reset my question answers because the reset email, I do not know it *.
-
Windows Defender gives me the error message: 0x800106ba
When I try to open Windows defender, I get an error message, Windows defender encountered an error: 0x800106ba a problem caused this program to stop the service, I have several questions and you want to open Defender to find out if I have a virus, I
-
Why have my headphones have stopped working on my Vista machine?
I checked in Control Panel and he repeats to me he works, but he does not cut the external speakers and only works in test mode. Also, somewhere along the line while I was trying to fix the headphone setting completely gone.