Wireless network adapter could not be activated

Similar Questions

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Wireless network adapter is not installed and configured

  I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.

  The adapter is inside the laptop.  You don't need to do something with it to install it.  Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install".  You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections.  This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).

  Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.

  Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.  If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).

  Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  As I am unsure of your Setup, I've included several items that can help depending on how you are setup.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.

• Cloud of Console 12.1.0.4 - IO error: the network adapter could not establish connection to access Instances of the ASM

  Hello

  Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.

  And if I "try access the Cloud Console ASM instances will fail with this error:"

  IO error: the network adapter could not establish the connection

  The connection descriptor has been

  (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)

  (PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))

  My env is:

  Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)

  Someone knows how to solve this problem?

  Thank you very much!

  Arturo

  (1) what is the user id you are using OEM fior?

  The user id should have Sysdba and should not be in the role SYSASM.

  (2) in order to check your port

  In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.

  Summary of endpoints listening...

  (Check that the PORT and IP information is correct)

  Instance '+ ASM1' READY State, has 1 operation for this service...

  (3) in addition, connect to asm and check the connection

  Show u local_listener and entered into OEM parameter details are correct.

  (4) OEM, I think you add Cluster_ASM.

  Oracle_home_path--> you're grid House

  username--> with sysdbarole

  --> Sysdba role

  Cluster_name--> $GRID_HOME/bin/cemutlo - n

  Service name--> + ASM

  ADD

  NAME: INSTANCENAME

  -Home: HOST1

  listener_HOST-->< show="" parameter="" local_listener=""> exit

  PORT-->

  SID- + ASM1

  Concerning

  Krishnan

• I/o error: the network adapter could not establish the connection: connection to oracle database

  Hello

  I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.

  I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.

  I see that it points to the host name in listener.ora.

  Attached the screenshot

  

  Can someone help me solve this problem?

  Thanks in advance

  What he says is the listener.ora file is not necessary to start the listener.  If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.

  I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.

  So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.

• IO error: the network adapter could not establish the connection

  I'm configuration 11.1.2.3 on Windows 2008 using the Oracle database and when I try to configure connection services database and shared registry associated with the House I get the error "IO error +: the network adapter could not establish the connection +" all by filling in the details of the database. Windows Firewall is disabled, database is able to connect through SQL Plus am running, listening for the database service is running and the name of SID and the server have been provided properly. I even used localhost, apart from the name of the server providing the servename and ORCL is the SID. Any suggestions please?

  Usually, if I install on a Virtuelle/portable Windows machine that does not have a fixed IP or a dns entry I install a card closure before installing Oracle and have never had problems, it is established in http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABFHCJG

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Network adapter could not establish the connection

  Hello users,.
  
  I am facing a problem with my pool of connections configured in weblogic 9.2.3.0.
  
  The error is «network adapter could not establish the connection»
  
  Let me know why this error...
  
  -Milind

  Hey, Milind,

  better make you a telnet with your host name of the database, and the listening port.
  Maybe db url is wrong or database is down.

  -Kiss

• I had a the network adapter could not establish the connection...

  Hi guys,.
  I just downloaded and installed oracle 10g express in my installation of win 7.
  
  I have already created 2 tables and a single user and everything seems to be ok.
  
  but... There is a but! I tried to connect (using the ojdbc14 driver) NetBeans and I got an error "network adapter could not establish the connection.
  
  the connection string is:
  
  JDBC:Oracle:thin:@PCs:1251:XE
  
  (pcs is the name of my pc).
  
  This problem can be?
  
  Thanks much ;)

  Yep, that's what I told you, I tried with "xe" instead of "XE", but I still get the same error...

  What is the second mistake is the line you posted?

  Carefully COMPARE your line to mine

• Test failed: the network adapter could not establish the connection

  Hi friends,
  I am trying to connect my database of Jdeveloper 11 g (ADF) it will be by mistake
  Test failed: the network adapter could not establish the connection
  could u please tell me all the solutions
  Thank you and best regards
  Jocelyne.

  Usual causes are:

  (a) you have a kind of firewall between you and the DB that prevents the connection
  (b) you use the wrong host/port/sid for your database

  John

• Problem SQLDEVELOPER the network adapter could not establish the connection

  Hello I have a strange problem with SQL Developer (2.1.63) under Linux (Debian-testing-squeez/sid) version of the version: java java "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  Java hotspot Server VM (build 14, 2 - b01, mixed mode)
  
  Java is a debian .deb (sun-java6-jre, sun-java6-jdk).
  Whenever I try to connect to a database running on the remote server, I got error the network adapter could not establish the connection.
  (connection to base and also tnsnames connection)
  Sqlplus on the same machine works very well with the same connection settings, I also try the same SQLDEVELOPER version in the windows box and I had no problem with the connection.
  
  what I tried:
  1. in the course of running tcpdump eth0 dst db01x-i on the client and I don't got no network traffic going out of the box
  2.i have also tried tcpdump - neither eth0 host 192.168.3.9 and port 1521 on the server database to be sure, but also no traffic
  3. put the database server in/etc/hosts nothing change
  4. change the level of logging of the SQLDEVELOPER, but no significant errors
  5 different versions of the jdbc (ojdbc5.jar, ojdbc6.jar) connector
  
  I'd appreciate any help in this topic.
  BR and thx Thomas

  This problem is probably with java networks interacting with a new parameter to the default kernel in Debian. Among the bugs identified on this is here - [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560056]
  Two things to try, from various bug reports, are
  (1) "echo 0 >/proc/sys/net/ipv6/bindv6only ' and make this change permanent if it works
  (2) edit {sqldeveloper home}/sqldeveloper/bin/sqldeveloper.conf and add the line}
  "AddVMOption - Djava .net .preferIPv4Stack = true '.

  Jean Paul

• Satellite L300-2This - wireless network adapter is not listed in Device Manager

  PL. seated me in solving the WIFI issue in my newly purchased Toshiba Satellite L300-2This (PSLBGE 020004AR)

  1. me confirm - this model is equipped with WIFI as shown in the Web of Toshiba site but my device manager it is not displayed at all. (using Windows XP)-its only display Realteck LAN

  2. I installed the drivers from the site web of Toshiba - but always hardware WIFI not be picked up by any driver. Device Manager showing that a single 'Ethernet LAN' not installed-may be it is the WIFI card but once again on three pilots (real teak/intel/Ac..). which is the right selection computer-based laptop model No.? as none does not detect the hardware.

  3. confirm me - this model is NOT - equipped also BluTooth?

  Appreciate the quick response in this regard.

  Violaine Asim

  Hi mate,

  Just a simple question: have you activated the wireless network adapter using the hardware on the computer switch portable and key combination FN + F8?

  Satellite L300 is permanently equipped with wireless network card because a friend of mine had the same specifications.

  However, you should try to update the WLAN driver. Check the download page of the Toshiba driver for an update.

  Welcome them

• Atheros AR5125 wireless network adapter does not

  Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too

  Any help, please notify!

  JudyB_729

  Judy

  What operating system do you use?  I would like to move to the section appropriate for your driver problem, but can't until I know.  BTW this section isn't for comments etc site technical support

• Atheros AR5007EG Wireless Network Adapter does not

  Hello

  My Atheros AR5007EG Wireless Network Adapter has stopped working. I tried to update a driver he says not installed correctly. I am running windows 7 32 bit

  There should be a little more characters for your PC model Toshiba laptop.  For example, here is the support page for the Toshiba Satellite L300 - ST3502--> http://support.toshiba.com/support/modelHome?freeText=2221250

  If it was your model, you click on the "Drivers & updates" tab, click on the "Wireless" link under "filter by" and then look for the link "Atheros Wireless LAN Driver for Windows 7 (32/64)" you get to a page where you can download the driver installation package.

  Download the driver appropriate for your computer (which may or may be not the same as in the above example) and run the installer.

• Satellite L50-B-1DZ - wireless network adapter does not work

  So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".

  I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.

  I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.

  How have you tried to update the driver WLan?
  Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?

  Try it!

  You said you reset the system in the past?
  How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more?