Wireless network adapter is not installed and configured
I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you
You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.
The adapter is inside the laptop. You don't need to do something with it to install it. Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install". You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections. This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).
Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.
Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network. If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).
Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.
Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.
Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.
Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.
Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.
As I am unsure of your Setup, I've included several items that can help depending on how you are setup.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro. Said A WLAN card is disabled. What? I don't know what that means. What can I do?
Hello
I suggest you follow the troubleshooting steps form the article and check if it helps.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
http://support.Microsoft.com/kb/870702
Also check with Skylink® support site for more information about the issue.
-
Network driver is not installed and have no option for the wireless
Hello
My network driver is not installed and I have not listed in my device manager wireless driver. For this reason, I am unable to connect to the internet.
I've seen previous posts that you need network controller ID for this problem, they are:
PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01
PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C
PCI\VEN_168C & DEV_0036 & CC_028000
PCI\VEN_168C & DEV_0036 & CC_0280
Excuse my lack of knowledge in this area, but how to download new drivers if I can't get an internet connection.
Appreciate your help.
Best regards and thanks,
Jeff.
Hello
Please try:
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe
You also have the following for Bluetooth:
http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe
Kind regards.
-
Wireless network adapter could not be activated
My laptop also did EXACTLY the same thing in the morning today.No effect with the wireless on switch on the computer. The light is always red. Last night an automatic update that happened (update for windows Vista (KB955430) 09/05/2009 09:03), which cannot be deleted. I don't know if this problem is related with the update.My laptop is HP Pavilion dv6439nr. Running Windows Vista Home Premium (Service Pack 1). Wireless adapter is "broadcom wireless 802.11 b/g WLAN PCI" that is gone now.Windows network diagnostics shows "this computer doesn't have a card installed and configured wireless network."HP Home Network Center shows "Wireless status: disabled; When I try to enable wireless LAN, it shows "wireless network adapter could not be activated.I tried to scan and reinstall the driver but the device does not appear.The wireless router works fine with other laptops.If anyone has a solution it would be greatly appreciated.Thank youAlboury,
It seems at this point that your wireless network adapter has a hardware problem. Check out this troubleshooting guide step by step on the HP Pavilion support web site. If you can't get your active wireless card, you will need to contact HP or repair HP authorized repair for hardware Center.Let us know if we can provide assistance.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Wireless network adapter does not work on my Satellite A200
Hello
My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.
What can I do?
Details:
Typ: Atheros AR5008X Version: 7.2.0.164
Laptop Satellite 200
PSAE6EPlease help me!
Thanks in advance!Phil
BIOS bug? I don t think so
First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.
After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.
I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.
-
Satellite L300-2This - wireless network adapter is not listed in Device Manager
PL. seated me in solving the WIFI issue in my newly purchased Toshiba Satellite L300-2This (PSLBGE 020004AR)
1. me confirm - this model is equipped with WIFI as shown in the Web of Toshiba site but my device manager it is not displayed at all. (using Windows XP)-its only display Realteck LAN
2. I installed the drivers from the site web of Toshiba - but always hardware WIFI not be picked up by any driver. Device Manager showing that a single 'Ethernet LAN' not installed-may be it is the WIFI card but once again on three pilots (real teak/intel/Ac..). which is the right selection computer-based laptop model No.? as none does not detect the hardware.
3. confirm me - this model is NOT - equipped also BluTooth?
Appreciate the quick response in this regard.
Violaine Asim
Hi mate,
Just a simple question: have you activated the wireless network adapter using the hardware on the computer switch portable and key combination FN + F8?
Satellite L300 is permanently equipped with wireless network card because a friend of mine had the same specifications.
However, you should try to update the WLAN driver. Check the download page of the Toshiba driver for an update.
Welcome them
-
Atheros AR5007EG Wireless Network Adapter does not
Hello
My Atheros AR5007EG Wireless Network Adapter has stopped working. I tried to update a driver he says not installed correctly. I am running windows 7 32 bit
There should be a little more characters for your PC model Toshiba laptop. For example, here is the support page for the Toshiba Satellite L300 - ST3502--> http://support.toshiba.com/support/modelHome?freeText=2221250
If it was your model, you click on the "Drivers & updates" tab, click on the "Wireless" link under "filter by" and then look for the link "Atheros Wireless LAN Driver for Windows 7 (32/64)" you get to a page where you can download the driver installation package.
Download the driver appropriate for your computer (which may or may be not the same as in the above example) and run the installer.
-
Atheros AR5125 wireless network adapter does not
Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too
Any help, please notify!
JudyB_729
Judy
What operating system do you use? I would like to move to the section appropriate for your driver problem, but can't until I know. BTW this section isn't for comments etc site technical support
-
Sometimes I leave my computer on at night. Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use. When I try to disconnect it from the network, then reconnect, it says that it cannot connect. Then, when I try to restart my computer it is sitting at a screen saying "stop down". "." My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.
However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.
Can someone please tell me why this keeps happening and how to fix it?
original title: unable to connect to a network.
Hello
Are you aware of any changes made to the computer, before the show?
Method 1:
Step 1: Safe Mode with networking
Start your computer in safe mode with network and verify that the question.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: Clean boot
If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
Update the NIC drivers and check the issue.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Method 3:
Run a virus scan and make sure.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.I hope this helps.
-
Satellite L50-B-1DZ - wireless network adapter does not work
So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".
I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.
I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.
How have you tried to update the driver WLan?
Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?Try it!
You said you reset the system in the past?
How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more? -
Satellite P300 PSPCCE: Atheros AR9281 wireless network adapter are not all networks
I have a Satellite P300 PSPCCE with Atheros AR9281 wireless network.
After a clean install of Windows 7, I can't see wireless networks, unless I connect an Ethernet cable to my wired network card.
As soon as I take the cable on wireless networks disappear. This computer had Vista and it worked fine there. I tried latest drivers available from Toshiba, but that makes no difference.
I have tried disabling the wireless and turn market as well with the FN and F8 key and switch on the front. I also tried to uninstall. But it's always the same.
If someone has had this problem and is there a solution to this?
Bjarni cordially
Hi mate
To be honest I never did experience even with a WiFi card and I have no idea why the LAN cable affects WLan card functionality, it makes no sense to me!
First, I recommend that you check the settings of the router and reset if necessary
In addition, you should go to the s for laptop BIOS settings and set its default value.
Check the version of the BIOS if newest is available, then an update would be worth a tryYou use the Atheros Wlan configuration tool?
If this is not the case, try this out!
It s a configuration tool that could be used instead of owning windows wlan settings -
S3-391 Acer wireless network adapter does not work after driver update
Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site. After updating the driver, I can no longer connect to my wifi at home. When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol. I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck. When I try to manually configure a wireless connection, I get message "an unexpected error has occurred." I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses. Any help would be greatly appreciated, thank you.
And while playing, I managed to fall on a solution. When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.
-
Wireless network adapter has not been detected in windows 7 ultimate
Hey there. I use the HP Pavilion tx 1000, and it runs on windows 7 ultimate. It worked without a problem, but recently the wireless adapter was disabled. When I looked in the Device Manager, the wireless card is not indicated. The bluetooth is turned on but and the wireless switch is turned on.
Hi Tulip.
I would say you can check with the service WLAN is started and set to automatic, if the WLAN service is stopped, I suggest you to start the service and put it on automatic.
Please follow the steps to start the WLAN service.
(a) click onStart, type services.msc in the start search box and press on enter.
(b) Autoconfig SelectWLAN in the list, right-click right properties
(c) Chenge startup type automatic
(d) click the onStart
(e) click apply Ok.
(f) restart the computer and check if the wireless adapter is detected in Device Manager.
If the service is started, you can try to download the latest drivers for wireless network card on the HP site for the computer and install it and check if it helps.
Access the link below and choose the right model and download the drivers.
http://h10025.www1.HP.com/ewfrf/wc/pfinder?LC=en&DLC=en&cc=us&tool=&query=HP+Pavilion+TX+1000+#n29
You can also contact HP support to check if they have any diagnostic tool to check if the wireless adapter works fine.
Link to contact HP support: www.support.HP.com
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Dr., Sir, I can't fix my wireless adapter usb [ALFA] Please help me how to fix this, your faithfull, Mr Hameed.
Hello
· Which is exactly the problem that you are facing with USB adapter?
· You are able to go online?
· Is it detected?
· What operating system is installed on your computer?
Method 1: Run the network troubleshooter and check if it solves the problem:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2: Follow the suggestions from the link and check if it helps:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Method 3: Solve Wired and wireless network connection problems in Windows
Method 4: you can also reset the USB controller and check if it makes a difference:
a. type devmgmt.msc in the start search box.
b. expand Bus USB controllers.
c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
d. restart the computer and reinstall the USB controllers.
e. plug the removable USB storage device and perform a test to ensure that the problem is solved.
-
TE2100 - wireless network adapter is not listed in Device Manager
Hello
I formatted and reinstalled using a generic copy of Win XP Pro. Upgrade to SP3 and installed all the components Toshiba TE2100 for on their Web site. However, Device Manager does not appear the internal wireless. I have the driver and tried to force the installation by adding hardware but no joy it no more. Any suggestions on how to get the computer to recognize it has wireless.
TE2100 model pt210a-082n9.
Thank you very much
Hello
First WLAN can be enabled or disabled with the hardware switch on the computer laptop and FN + F8.
Did you check that?Do you have which driver tried to install?
I can recommend the drivers from the Web from Toshiba site because I never had problems with them:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversIf it doesn't work you should with SP2 only. SP3 cause compatibility problems that can be solved with SP2 only.
Good bye
Maybe you are looking for
-
does support wireless dual band (2.4 GHz and 5 GHz) in the hp probook 450 - g2
Model: Hp Probook 450 - G2 Please confirm the support of platinum rating book Wi - Fi the below mentioned criteria? A Wi - Fi connection must support dual band (2.4 GHz and 5 GHz)Support 802. 11A, 11b, 11 g, and 11n IEEE standardIt must have the abil
-
Apple TV 4 change do not read status
My Apple TV 4 isn't immediately changing the status of TV shows or Unwatched to Watched movie after that the show has been seen. I look at my watch on a TV which is also my computers screen. I just change the TV HDMI 1 HDMI 2 input. When the show is
-
Someone got my account and sent a bogus email
Sent an email that I was in Scotland and the money needed to go home - was stolen and they stole my money. Completely wrong
-
OnImmediateValueChanged cursor does not update the label text by dragging.
Consider the following: Container { layout: DockLayout {} Label { id: label textStyle.base: SystemDefaults.TextStyles.BigText verticalAlignment: VerticalAlignment.Center horizontalAlignment: HorizontalAlignment.Center } Slider { fromValue: 0 toValue: