HP raserjet 1012
HP 1012 raserjet does not work.
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.
Try printing HP and Scan Doctor for Windows (10, 8/8.1, 7, Vista and XP)
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146
Good luck, you need to update or reinstall the latest driver.
HP - LaserJet 1012 - drivers<-- latest="" are="">-->
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=306509&lang=en&lang=en&cc=us&cc=us
HP support/troubleshooting & drivers
http://WWW8.HP.com/us/en/drivers.html
Contact HP
http://welcome.HP.com/country/us/en/contact_us.html
HP forums
http://h30434.www3.HP.com/PSG/
=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Solve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Diagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0
Find the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
Find and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit
I have an HP Laserjet 1012. My PC has Windows 7 Pro 64 bit. I used the Laserjet 1015 PCL 6 drivers. When I printed the first two times, it worked fine. Now each page just print "Unsupported personality: PCL ' at the top.
What should I do now?
Thank you for your ' Experts for a day Tech Support.
Mark
Hi rbarbo43,
I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?
-
Elite x 2 1012: Disable "auto rotation" on Elite X 2 1012
I have a X 2 1012 elite and I can't conrol the function "auto rotation". There is no hardware button and I do not see a combination of keys.
Yet when I go into the section display settings for Windows 10 "rotation lock" button is grayed out, - I can't select it.
Any suggestions?
Shahman,
I was wondering if your keyboard base is attached when you try to access the setting of auto rotation?
It should be greyed out when attached and only reactive once detached.
Sometimes, once separated, you may need to rotate the tablet to portrait. Then the automatic rotation of images button works.
Have you tried this yet?
-
When I try to update iTunes I (-1012) error message what should I do?
Hello world
I am trying to download the latest update to iTunes App_Store but the server (l think) prevents me from that and the error message
"The operation could not be completed. (NSURLErrorDomain error-1012.) -(1012)" appears.
No matter what kind of suggestion helps solve such a problem is appreciated putting in mind that I always get a black window, whenever I turn on or restart my Mac and there is message says "no bootable disc. "Please enter a '. So I am forced to do it the hard way with the help of the ' alt ' key.
I have also tried other methods provided by the community in order to resolve the error I get from App_Store such as; concerning keychains an another one about recover host.
Have you installed something called "Avast?
-
'Manual' HP 1012 Laserjet cleaning Cycle
Is there a way to launch 'manually' on a HP 1012 Laserjet Printer cleaning cycle? I'm on Windows 7 x 64 (using the work around the drivers), and the software provided cleaning does not work on this OS. Thank you!
Yes there is! Here's how you can run a manual cleaning cycle:
- Load paper photocopier rank in the paper tray.
-
X 2 elite 1012: X 2 elite 1012 512 GB
I'm looking to pre-order the 1012 with 512 GB ssd and the m7 processor. I can't find anywhere. I can not even find a customization option. What is going on?
Hello donohum77,
If its not listed on HP store catalog, then it is not yet been made public to see availability.
Unfortunately, not even HP employees are privileged to make the information.
HP retains a wrap tight on this type of things.
I'm sorry.
-
Hello
I just got the USB docking station - C HP Elite Thunderbolt 3 65W.
I plugged in and my Elite X 2 1012 G1 fresh, but that's all. No ports do not work. The monitor is not recognized or the other.
If I plug in my phone via USB, it loads, but not recognize it as a storage device.
I have looked everywhere and can not find drivers that will solve this problem.
I have:
-Shot lightning software installed and running, but still without success.
-Installed and running "Intel Thunderbolt Firmware Update Utility", but get an error that there is no controller driver.
Help, please.
PS. The machine was reimagee with an SOE enterprise. So I don't know if I am missing drivers.
OK problem is finally resolved.
Rebuilt everything. Everything is OK now.
Workstation.
Lightning blow job.
Happy customer!
-
Hi all
I'm designing a HMI system with a TSM 1012 and a cDAQ 9133. There is one thing I can't find online resources: the touch screen has speakers? The cDAQ can produce the audio signal via the minidisplay port, but the monitor will be able to run this signal?
Thanks in advance
Hello
Unfortunately, the TSM is really just a touch screen and it has no speakers mounted on it. So I'm afraid that the screen will not be able to run the audio port minidisplay
Andreas Jost
Technical sales engineer
National Instruments
-
Plastic 6 1012 broken screen HP Envy near hinge
My 6 1012 HP Envy also broken left hinge, the laptop is already out of warranty.
I noticed that I'm not the only one having this issue on the discussion Forum.
Then HP always fix this?
Hi Knfelike,
I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.
-
HP Pavilion p7-1012: factory reset
I try to do a factory reset on my HP pavilion p7-1012 I bought by Aaron, when I go to the system recovery I get the message "your computer does not have a recovery partition. So I tried to burn the recovery disk and it says "not found recovery Partition. How can I do to reset my pc, or I have to order the software drivers and media? Any help would be appreciated...
Uneekbrother, welcome to the forum.
It seems that the recovery partition has been removed from the car. The System Recovery / backup / restore section for the computer should help you make this dertermination. Here is a guide to help you order the recovery of system for computer media, if you do not find the partition.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
I have a mini laptop Dell Expiron 1012 and want to read ebooks on it. Mirosoft ereader soft ware will work on this subject. I tried to get it installed and activated, but it is not acgtivate. Refered me F & Q. well this work on my computer or I'm doing something wrong. Please contact me at * address email is removed from the privacy * or 918-346-3365 with your answer. Thanks bob davis
Microsoft Reader works with 32-bit Windows 7, but not 64-bit: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Reader&v=Microsoft&uid=2&l=en&pf=0&pi=0&s=microsoft%20reader
If you don't know what version you have, follow the steps detailed here: http://support.microsoft.com/kb/827218
-
Windows 7 driver for HP Laserjet 1012
Where can I find a printer driver for HP Laserjet 1012 that is compatible with Windows 7?
I saw several people to use Windows 7 Laserjet 1015 drivers for the LJ 1012. Try this:
Start/devices and printers.
-Choose Add a printer.
-Choose Windows update at the bottom of the window of the printer driver to install because the HP Laserjet 1015 is not on the list of HP printers. But after the update it is "HP Laserjet 1015.
-Choose the generic IEEE 1284.4 as the printer port
Here's how a document: HP LaserJet, Color LaserJet and AiO/MFP of LaserJet products – install the driver included with the Windows 7 operating system
Good luck!
SeanS
-
LaserJet 1012 driver for Windows 7
Just bought a new laptop running Win 7 64 bit. I am trying to connect to my HP Laserjet 1012 on my desktop, which is running XP. The download is said to use the Vista drivers. I have downloaded the drivers, extract all the files in a folder, but when I point to the folder that W7 is not what suits him. Any suggestions? Thank you
Found a solution:
Using VIsta drivers to install the printer locally and then follow the steps of Printdoc
-
LaserJet 1012: laserjet 1012 does not not on windows 7 or Windows 10
Hello, I had a problem when I updated my windows 7 to 10.
I found a solution for people like me using a laserjet 1012 on win 7:
-come on in: manually install a printer. (because yours in not in the list...)
-Choose the port: port 4DOT
-Select driver laserjet 3350
-give a name to this printer, mine was 'laserjet ghost' but you can call it as you want
-then plug your printer with USB cable and click on 'print a test page', it will works.
Sometimes you can have a "unsupported device" problem, just turn off the printer and turn it back on.
Hope this will help other usuers with laserjet 1012 that works very well
BUT IT S NOT WORKING NOT NOT ON WINDOWS 10
I FOUND THE SOLUTION FOR WINDOWS 10:
-first to download the driver for windows vista (I m using 64-bit for my computer):
http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=306510&swLangOid=17&swEnvOid=2100
-J' uses the same procedure as for windows 7, but I chose to drive rather than in the list of printer driver. So I choose the driver that I just downloaded earlier: hpc1015w.inf, then open and select the HB 1012 printer
-J' I'm able to print from microsoft office word, and other software, but I'm still working for my pdf Acrobat printing.
Hope it helps.
-
HP 1012 printer won't ADD. Windows Vista does not recognize the printer or port.
Windows does not add 1012 HP printer.
Although compatible with Vista: http://www.microsoft.com/windows/compatibility/windows-vista/Details.aspx?type=Hardware&p=LaserJet%201012%2015ppm%20600x600dpi%208MB%20USB&v=HP&uid=Q2461AABA&pf=0&pi=0&s=HP%20Printer%201012&os=32-bit, a free download is required (whatever that means - read the above yourself). This is perhaps why you cannot install. While on the HP site, get the most up-to-date drivers, firmware or software for this printer and use it for installation (which came on the drive or what you perhaps obsolete).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Update to Firefox ver 19A thwarted my ability to get java to work
I know that there were MANY messages and answers about java since 7_U_11. At one point, using Windows 7, FF 18 and 7_U_13 java, I was able to get java to work by adding a registry entry pointing to the dll plugin NextGen. However, now that 7_U_15 is
-
Satellite P10 824: update driver ATI Radeon 9700 latest version
I have the ATI mobility radeon 9700 display drivers version 6.14.10.6422 dated 10.02.2004 running.I want to update the drivers to display for a newer version, but I can't find newer versions.The ATI homepage I can download the Catalyst 7.9 drivers, b
-
version compatibility - it is not possible to open an old project
Hi guys,. I am facing a few challenges here. I try to open a project in LV v.2014, but this is an old project (LV 5.0) and it returns to me an error (attached .jpg) by saying that the version is too old to convert the current version. How can I proce
-
HP Touchsmart 530 running Win 7 64 bit. How to disable the functionality of remote control on my pc. When the DirecTV remote is used, the white light at the front of the PC flashes. Sometimes the PC will respond in a strange way. Example: Installing