HP Recovery Manager & Recovery Media creation unavailable in SEARCH CHARM!

Similar Questions

• Help with recovery media creation errors

  I bought a new HP spectrum XT Ultrabook 13D-2100 (8-64 bit Windows), and I tried to create the recovery media creation.  I get an error when you try to use USB (Flash Driver) that declares "we live errors in the creation of recovery media. Please try again. "Even if I did a video on saving a media creation of recovery on a USB flash drive, it was a mistake. I've done five times, I n ' know what to do now.

  I'd appreciate any help for this problem that I really want to create the recovery media creation.

  Hello

  I would contact HP (the telephone number can be found on the corresponding link below) and explain that the Recovery Media Creator is unable to create a viable together records of recovery/usb media and ask them to send you a free replacement recovery media set.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP Pro x 360 G1 spectrum: HP recovery media creation tool hangs

  I'm trying to create a recovery media via the USB port on my new x 360 spectrum.

  I click on the "I agree" for the creation of 1 set of media and continue, I get the material "analyze" and one window pop-up "HP Recovery Manager has stopped working" if I click to close.

  Help, please.

  Thanks in advance

  I ask that your question is raised.

  If the application of media Create is corrupted, you cannot make your own copy.

  Ask a factory prepared recovery media USB key you sent.

• S HP Probook 4330 recovery media creation

  Hi all

  Just got my new Probook which I am very happy with, but there is no option to create a recovery media. Pressing F11 at startup to high gives only the option to restore, not to create discs. There is no recovery Manager software installed on the operating system. If in its current state, if the hard drive dies, I would not be able to recover.

  Any ideas?

  Thank you

  Ben

  Hello

  If there is no HP Recovery Manager installed, then no, you don't have this option. Neither program is available for download.

  I had the same thing on my HP Elitebook 6930p.

  Recovery partition could be used to restore the operating system to the factory by using the F11 key settings, however, I had no option to create a recovery media. And no recovery disk provided with the laptop.

  Having much experience with HP business PC, I knew that I could order a set of disks on their part.

  Normally, I buy my PC used and off-lease, so I had to pay $10 for the recovery disks, because the machines were out of warranty.

  I bought the new 6930p and HP sent me the discs for free.  Maybe they will do the same for you too.

  Paul

• HP ENVY Desktop - 750-167c: HP recovery media creation

  I recently bought a HP Envy desktop computer and I tried to create a recovery media and I get a message saying that the partition does not exist. The machine is Factory reconditioned.
  
  What are my options to move forward. I'm guessing that the mahcine should have this partition when it was "reconditioned."

  Thank you.

  #HPExpertDay

  I suggest you call HP support that could take a command remotely on your computer to see what goes wrong, and then if necessary, they might send you a series of recovery Image factory (depending on the situation).

• HP Touchsmart 15-r017dx: recovery media creation will not accept DVD

  I had trouble creating recovery discs and tried to make them for a week now and he's really starting to happen to me. My laptop requires 5 discs DVD and I started using DVD + R (Memorex) discs and was able to create 3 of the 5 disks required. Then I had to go to the store for a bit more, but apparently I got DVD + R DL discs, concerned that it was a problem that I checked the compatibility and these discs should work fine with the design of recovery media program. However, whenever I insert a DVD my laptop just gushes it back asking for me to insert another disc. I don't think it's a problem with the brand since I was able to do 3 discs already using the same brand. I even went in Mode safe mode to see if maybe it would help, but it didn't. I searched everywhere for a solution and can not find someone with the same problem as me. I am at my wits end with this process so please any help on this would be greatly appreciated. I have a HP Touchsart 15 - r017dx running Windows 10 (64-bit).

  You started with dvd single layer and that's how the image is already created. You must continue with a single layer.

  BTW-Memorex is not a good choice of discs. I always recommend them to avoid if possible.

• Recovery media creation

  Is it necessary to create media recovery (dvd) for my computer hp laptop pavilion I have these:
  -key original home base printed windows 7 64 bit on my laptop
  -file .iso base windows 7 64 bit home
  -installed files install all the drivers and other software?

  Hello

  I would recommend when even create your set of recovery disc for two reasons.

  1. If you need to make a claim under warranty, HP may ask that the original operating system OEM version of.

  2. If you want to sell the phone in the future, most people prefer to have discs that reinstalling the OS, drivers and software in one appointment.

  Best regards

  DP - K

• PAVILION 130 500-a: FAIL recovery media creation

  I am trying to create a system recovery disk on a new 32 GB USB and keep affected by the following error message

  

  If supposed recovery disks be done with/to the original operating system is not after the upgrade to a new operating system. You can try to create a Windows 10 or USB recovery CD.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• x 200 (74542GU) restore partition and recovery media creation

  Hi, I confused!

  My new x 200 came with xp was preinstalled and with the DVD of restoration vista buisness.

  If I use the recovery partition now (before I approached the vista dvd), what version of windows will install the recovery partition?

  And if I choose to use the vista dvd, which will be there (recovery partition) then?

  Thank you.

  Hi Welcome to the forums

  Yes once more be using xp, if you use the recovery partition... If you want to use vista install when you want... but before to do that are doing better on the current recovery CD system coz in the future if you want to go back to xp you can use xp again

  After vista installation that contains the vista recovery partition do so to better the recovery dvd set of said so!

• HP pavilion p017tu 15: recovery media creation

  I want to creat DVD restore media. HP claims that the DVD + R is better. I want to know what differences b/w, DVD + R and DVD - D.other quairy, it's 32-bit operating system and 64-bit.

  Hello

  You can use + R or - R, but is NOT rewritable. You can also use blank DVD DL.  Check the following table:

  http://www.Diffen.com/difference/DVD%2BR_vs_DVD-R

  Kind regards.

• Laptop HP 15-f162dx: THEIR is NO OPTION of DVD FOR DVD RECOVERY DISC CREATION IN the HP RECOVERY MANAGER'S

  I HAVE HP 15-f162dx NOTEBOOK PC in WHICH I AM creating RECOVERY DVD DISCS IN "HP RECOVERY MANAGER", BUT in THE "HP - CREATE RECOVERY MEDIA" IS NO OPTION TO CREATE a DVD. EARLY CLAIM.

  CONCERNING

  Ok.

  I don't see that as a real issue or problem.  The ability to create a recovery media is part of the purchase, and you do not have the ability to create a recovery media.

  Why don't you use the option of USB flash drive?

  The USB stick recovery is higher on the recovery DVD disc in a number of ways.

  (1) a usb flash drive are not damaged by just scratching the surface, unlike the DVD in a set of recovery disks. A scratch on the side of disc label #1 and the whole is unusable.

  (2) a recovery, when from a usb flash drive takes less than an hour, so that once made with one set of recovery disks can take up to four hours.

  (3) not all DVD media can be used to create a reliable recovery DVD media.

  (4) DVD media can be easily destroyed by heat, if you live in a region of the world where the temperature is normally high.

  (5) usb recovery media creation takes less than an hour, compared to the time it would take to make a recovery of the DVD disc.

• "Partition recovery has been deleted" Message in creation of recovery media

  HP Pavilion 2205tx - C5j09PA #UUF G4

  Windows 8 64-bit

  "Partition recovery has been deleted" Message in creation of recovery media.

  I bought my new HP pavilion laptop G4 two days ago only and has not changed anything in the two players named drive C: for windows and D: for HP Recovery.

  now, I want to do a recovery with the HP Recovery Manager software disk.

  but it shows a Massage: "Recovery of Partition was deleted" Recovery Media creation section.

  in the recovery Partition my computer is almost full (3.26 G 25.5 G is free). so I think that there are current recovery files.

  I have not access to HP to buy recovery disk or call support.

   

  Thank you

  I don't know why your PC is saying your partition disappeared - you're right, it seems to be missing. I know that if you use the wizard to help to make your recovery disks backup copies and then ask him to remove the recovery partition to give you more space on the hard drive, it will remove the factory image HP of Windows 8 for the recovery partition and let the normal Windows repair tools.

  There are tools, but which allow you to create your own recovery partition full with these tools of Windows repair and a new image of your instalation so that you can restore from that. You can use this tool: Windows 7/8 - creator of Partition Recovery OEM available here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but it's a lot of work and it would be faster and more easy just for your data backup and restoration of your HP recovery disks made you from the support Assistant. If you did not the disks, HP can opt to send you a copy... they do not normally this but I read that some people have luck to get a free copy of HP media... otherwise, they want you to buy recovery disks ($40.00). I guess it depends on the exact terms of your situation.

  An alternative is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your entire system even with your custom programs installed, to the exact state it was when you made the backup image. (this may take several dvd) I suggest that you go down that road because your system with Macrium Reflect restore is much faster than restoring from the HP recovery discs. Even if you do not get another copy recovery disks, you must use this tool to make another backup that you can customize to your liking. Your re - installs will be faster, they will already have your chosen installed software, and you will save wear on your HP recovery disks.  You can then delete the recovery partition to regain this space on your hard drive (since you cannot access in all cases, you will not need this space being taken up).  BUT... you cannot restore Mode UEFI which is what HP comes with. You have to go into your Bios settings and switch in the Legacy Bios mode (which disables the secure boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re - installs you can go back into the bios settings and disable bios Legacy and reactivate if secure boot you want. (Windows 8 charge mode UEFI bios active secure boot or Legacy mode... it's your choice.) UEFI mode will load faster, but it will cause problems if you want double boot the system with another OS) hope this helps.

• That means the creation of recovery media requires 5 discs?

  Hello

  I want to create recovery discs using HP recovery media creation, but unfortunately, the program wants to consume up to 5 discs DVD. I thought: why it takes 5 when someone told me that two he needs? I have no idea of what is the image of the system, but apparently it's much bigger than I imagined.

  The reason why I'm performing this process is to remove my partition recovery, who sits there wasting space.

  Is there something wrong with this program of recovery or it's?

  Hello:

  I guess I was not clear...

  You make restore disks with the utility making recovery disc in the menu programs.

  If you have already done this, then that's all you need to do.

  If you use it, then all you have to do is to insert the floppy disk 1 into your DVD player and start it.

  Then you follow the prompts and insert the rest of the disks when you are prompted.

  Paul

• Cannot cancel the process of creation of recovery media and start a new

  Help me to cancel the recovery media creation process and it all over again because I found that I need four discs to make the establishment of recovery. I did the first disc, but I need to get an another three discs for the process to be completed. It is said that "creation of media recovery is not complete", if I want to cancel the whole operation and start from the beginning later when I'm ready for it. How I can do this, measures or instructions to solve this problem would be appreciated.

  Computer: HP Pavilion dv6-6120se

  OS: Windows 7 Edition home premium x 64

  You can create only one set of recovery disks. So once the process is complete, you will not be able to create a new one.

• Re: Toshiba Recovery Media Creator - no HDD Recovery area

  Hi friends, I bought a new Toshiba Kirabook PSU8SA-00V00U, a few months ago. I wanted to create emergency recovery disks, but whenever I start Toshiba Recovery Media Creator, it comes with a message that HARD drive recovery area undetected.

  Then I tried running the recovery environment by pressing 0 at the beginning upward.
  It comes with a blue screen saying that can not load from the recovery partition.

  I checked with Paragon Hard Disk Partition Manager software that the recovery drive is available.

  How do I make a recovery media or connect this HDD in system recovery so that Toshiba Recovery Media Creator detects the recovery disk and made recovery media. If in the future, if I want to reset the PC to factory settings, it will be even coming up with a blue screen saying that it can not load the recovery environment.

  Any help will be appreciated!

  Hello

  Fact is that the installation of image recovery or recovery media creation works if the machine has only factory settings. In other words, everything must be in original condition without any changes. With the changes I mean, original OS must be installed and the structure of the partitions of HARD drive should not be changed.

  If you try to change HARD drive partitions original structure the system in general, or Toshiba recovery media creator, will be confused and will not be able to find what we call markers which provide information on the exact location on the HARD disk where the recovery image is placed or registered.

  Did you do something that might be responsible for this situation?