HP Scanjet 4300C compatibility with Windows 7

I did an upgrade from Windows XP to Windows 7 and my scanner HP Scanjet 4300C seems to be properly installed in Windows 7, but nothing happens when I try to scan.

In the Panel, the Scanner seems to work, but when I try to add a scanning profile I get the error "unable to initioalize the selected scanner. The test of the scanner button is also disabled and the scanner does not appear in 'My computer' as a scanning device.

I think there may be an updated driver to resolve this problem? The scanner was working fine under Windows XP.

Hope you can help me.

TNX

Thanks to this post, I figured out how to get the scanner software and the driver installed and working on Windows 7 32 bit.

Here are the directions:

1. If your scanner is connected to your computer (USB) uninstall by using Device Manager, do not forget to check the box that says "remove driver." And unplug the USB when it is uninstalled.  When I did this had never installed the software previously in my Windows 7 operating system.

2. download the sj657 Installer packed HP. http://h10025.www1.HP.com/ewfrf/wc/generic...=reg_R1002_USEN
Unzip it into a folder.  If you double-click on the downloaded file, it will attempt to open the file of configuration automatically and you will get a message saying that the software only works on Windows 98, etc.  Just cancel and go to the folder (default location is C:sj657) and proceed to the next step.

3. Select the "setup" application and right-click on it to get properties, replace the XP compatibility (I have service pack 2). Then run the TI and click 'OK' on all Windows 7 warnings.

4. go in the folder Hewlett-Packard now in your directory Program Files, there will be a folder "HP Precisionscan". It will be the only unless you have to other HP products. Open the Precisionscan LTX folder and change all the apps XP compatibility.  I have also verified that the administrator checkbox on each app (there are several) just in case.

5 restart your computer.

6 plug in your scanner via USB and let in install.  Windows 7 should give you a notice that your C 4300 has been installed successfully.

The scanner now works using the LTX software installed on your computer. The buttons on the front do not seem to work, or can do you something with it by going to 'scanners and cameras' in your control panel. BUT in the case otherwise, it seems to work great and all the features are there in the LTX software.

My old C 4300 (I bought this probably nearly a decade) is somehow better than a newer scanner that I bought last year.

Tags: HP HP Printers

Similar Questions

  • "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

    so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

    Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

  • Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

    Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

    Windows XP Service Pack 3 is running.

    I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

    Hi deanie3,

    We will check if the following is useful.

    Method 1: Run the next Fixit and check the issue.

    Hardware devices do not work or are not detected in Windows

    Method 2: Follow the steps in the below article mentioned to see if it helps.

    You cannot install some programs or updates

  • HP pavilion dv6-3280 ca: compatibility with Windows 10

    Hello

    Just upgraded to Windows 10.

    Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

    and "ATI Mobility HD 4200 Series"

    I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

    and "no driver installed" for the ATI card

    Thank you

    RJLX

    Hey @rjlx ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

    If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

    If this is not enough, you need to restore the laptop to a previous version of Windows.

    Thank you.

  • WD5000H1U car has become a legacy product and we have no plans to create a firmware for compatibility with Windows 7. __

    I got this response from Western Digital on my old hard drive My Book Essential Extermal.

    Thank you for your response.

    Really, I apologize for the inconvenience that you are experiencing currently. Unfortunately, this disc became a product and we have no plans to create a firmware for compatibility with Windows 7.

    I hope that we have met your expectations today and that you are satisfied with our service. If you have any other questions, just reply to this email and we will be happy to help you further.

    Sincerely,
    Nestor V.
    Western Digital Service and support

    If you encounter any problems with your external hard drive, this could be the problem.

    Well, don't know how it happened, but it works.

    Last night I went on the Web site of WD and downloaded

    1 EssentialEliteFirmwareUpdaterv1.032_1.0.7.4
    2 WDSmartWare_Software_Updater_For_Windows_1_0_12

    After I did it, I unplugged all of my other drives and I tried everything again with the missing disk, but it still does not.

    This morning, I reconnected all of my readers, and he started to read the missing disk.

    The version of the driver file is now
    6.1.7600.16385(win7_rtm090713-1255)

    I'm not sure what did the trick, but maybe this will help someone out there.

    Good luck!

  • Reference Dell photo printer 720 compatibility with Windows 8

    Is Dell photo printer 720 compatibility with Windows 8. ?

    You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

    It is not compatible with windows 8 - see THIS

  • CS6 Compatibility with Windows 10

    I bought the whole adobe CS6 suite and I really need to update my computer, but I fear that my adobe software will stop working. I saw where cloud applications are compatible, but I didn't know where this question is still answered. Can someone please answer this question as Adobe support is unable to connect with.

    TIA

    Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

    -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

    -so if you have an older, program update you to Windows 10 at YOUR risk of problems

    An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    - or to run it as Administrator http://forums.adobe.com/thread/969395 to assign permissions FULL said... yet, but it is sometimes necessary for Adobe programs

  • Adobe Acrobat 5.0 compatibility with Windows 7

    Adobe 5.0 compatibility with Windows 7

    It is not compatible and will not work.

    Mylenium

  • Schedule the Winzip files and 'compatibility' with Windows 7 - HELP!

    Hello

    I have recently upgraded to Windows 7 from XP.  I have an online game (war hammer) with some friends and need to download a few files of curse.com to upgrade my interface in this game.  Under XP, things has worked well, but here's my problem with Windows 7.

    Everything by searching my directory of war hammer I found it under Program Files (x 86) vs my normal method on my desk or in the program file.  I keep Electronic Arts Warhammer Online - Age of Reckoning - Interface - Addons.

    From here, I have the head on the Curse.com website and save the files under this folder.  Then, I went to winzip and extract use them all in the game (war hammer).  When I tried to see the files in that folder, I was surprised to see 'nothing' listed!  I called a friend to walk me through the way he his under windows 7 and for some reason any, he has his records and mine are gone.  However, there is a button at the top that says: "compatibility files"?  If I click this button then all of my files show but for some reason any, that they cannot be played in the game to do what I need to do...

    Thoughts?

    Help!

    Hi Zhadum,

    As the game is compatible with Windows 7, it is indicated herethe link of Microsoft Compatibility Center. It should work in normal mode; I suggest you contact the manufacturer of the game, as the issue seems to be with the game from the link below.

    http://www.warhammeronline.com/forums/

    Concerning

    Arona - Microsoft technical support engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • HP officejet 4500 g 5510 - m compatibility with windows 8

    I have purchased a new computer with windows 8, but cannot get my printer above to work, says there need a driver?

    Someone help me?

    Try the web sites Windows 8 or 8.1 of Windows compatibility . It is shown as compatible.

    The full functionality driver software is available here.

    Did you mean type G510G instead of ground 5510?

  • hardware compatibility with windows xp

    I tried to install an external hard drive and a USB key, but windows says strongly I should stop installation because the products have not passed windows logo testing. is it safe to go ahead and install it because the two products state that they are compatible with windows xp, or should I not? I don't see a lot of products these days logo on the box of the product, but they claim that they are compatible.

    I tried to install an external hard drive and a USB key, but windows says strongly I should stop installation because the products have not passed windows logo testing. is it safe to go ahead and install it because the two products state that they are compatible with windows xp, or should I not? I don't see a lot of products these days logo on the box of the product, but they claim that they are compatible.

    Go ahead and install the equipment.  If you're worried, see the web site of the manufacturer to ensure that you have the latest version of the driver there (it may be newer than the driver on the CD that came with the hardware).

    You won't see a lot of products these days with the Windows XP logo on them because Windows XP is no longer sold by Microsoft and the hardware vendors are focusing on Windows 7.

    The list of hardware compatibility XP (or what was her last name) seems to have disappeared from microsoft.com, but the following information of theversion of Windows 7 is basically the same as it was for XP:

    The "Compatible" green check icon means the manufacturer of the device or software that this product works with 64-bit or 32-bit Windows 7. Generally, you won't need to do anything to ensure compatibility, and you will see "no action is needed" below "Compatible" on the product details page. However, if a manufacturer or Publisher offers or requires additional software or a newer version, you will find a link to what you need and see the details to the right of the link. Please note that these products have not been "Compatible with Windows 7" Logo program compatibility testing In addition, consult the manufacturer or the site of the Publisher for more information.

    "Compatible - Windows 7 Logo" means that this product meets requirements for compatibility with 64-bit and 32-bit Windows 7 from Microsoft. To get the "Compatible with Windows 7" logo, software and hardware must pass tests installation, performance, reliability, and security of Microsoft designed so you can be sure that these products are compatible with Windows 7.

    Almost always, if the manufacturer says that its product is "compatible with" a version of Windows, it is safe to install.

  • Quick VPN compatibility with Windows 7 and Windows 7 VPN configuration connection.

    Cisco VPN fast compatible with Windows 7 or not? I have studied several documents that claim their fix works, but not of that actually work. I do not understand how fast VPN installs without problem and connects all the way up to the "check network". Win7 must have some problems with the way it treats an echo request because non of the suggestions work online. It may also not be a problem of firewall because that when the firewall is off the same problem occurs.

    Another question the utility of VPN in Windows 7 will work with Cisco VPN routers? What are the requirements of compatibility or the settings to make it work?

    Any specific comments would be appreciated.

    Hey,.

    Thank you for visiting the Microsoft answers community site. The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    For your reference:

    http://TechNet.Microsoft.com/en-us/network/bb545442

    http://TechNet.Microsoft.com/en-us/library/dd787668 (WS.10) .aspx

    Kind regards

    Savan - Microsoft technical support.

  • Dell AIO946 compatibility with Windows 7

    I just got a computer with Windows 7 and my AIO 946 does not print. The printer is recognized and says it's ready to go, but nothing prints. I said that my 64-bit system needs a driver for Windows vista to run the printer, but I chatted to the guy in India (he told me my printer was out of warranty and so he couldn't help me) and I tried able to move to a sales associate to find out if I have to buy a new printer and they are not answer to (page does not load when you click on the chat button on Dell.com). Can someone tell me how to find and download the Vista driver so I don't have to throw a perfectly good AIO printer! ???

    nancyjean801,

    Try following that located instructions...

    946 owners photo printer all-in-one thread (W7)

    The trick is to install the Vista drivers in compatibility mode.

    Rick

  • Compatibility with Windows 10 printer

    It's the all-in-one Officejet 6600 compatibile with Windows 10?

    Has been answered many times already. http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/Windows-10-printer-compatability/TD-p/5162839

  • iPhoto Express compatibility with Windows 7

    When I try to install the program a disk I kerp Canoscan tis is not compatible message. I tried on Windows 7 compatibility section and it still will not be installed. I have a relative with windows 7 and it has installed on his computer, however his was installed as 32bitt and mine is 64-bit.

    Hello

    What is the exact error code or error message?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the fixit in the following Microsoft Fixit article and check if it works.

    Solve problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:

    Put the computer in a clean boot state, and then try to install the game and check if the problem persists.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

    Hope the information is useful.

Maybe you are looking for

  • Homekit remote access does not

    Hello. I have a Schlage door sense block 100% functional when connected by bluetooth with my iphone (ios 10) either when I m with the sense or Homekit app it management. The problem starts when I try to work remotely. Yes: (1) my 3rd generation Apple

  • Cannot find the libraries/containers group

    I'm running my Word 2016 startup folder manually in order to make my word of Zotero plugin appear. Instructions (https://www.zotero.org/support/windows_word_plugin_manual_installation_instructi ons #macword_2016) tell me to run the start-up folder fo

  • My DSC Certificae signature is not displayed under the link "Your Cerificate" and only encryption is indicated.

    I have a USB DSC(digital signature certificate) token, with the two 'encryption' & 'Signature' certificates downloaded into it.Two certificates are visible in the middleware of my USB Token. As you watch the certificate under 'Advanced-> view certifi

  • Satellite A500 - 18Q - RAM update

    Hello users,. I'm trying to update the modules of RAM to my laptop.It uses 1033 Mhz 2x2gb modules.I bought two new modules of 4 GB each, but they do not work, only LED opens... The new RAM modules are model Kingston KVR13S9S8/4 (1333 Mhz)I've actuall

  • 15 - n203TX: fire

    When ran didn't win 8.1 there is no problem of overheating, but ysrtdy when I try to open my laptop it said no device found startup... so I try to run the recovery but it stucks on 20% so I just installed win 7 64 bit and it works fine but now it is