HP officejet 4500 g 5510 - m compatibility with windows 8

Similar Questions

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• HP pavilion dv6-3280 ca: compatibility with Windows 10

  Hello

  Just upgraded to Windows 10.

  Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

  and "ATI Mobility HD 4200 Series"

  I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

  and "no driver installed" for the ATI card

  Thank you

  RJLX

  Hey @rjlx ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

  If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

  If this is not enough, you need to restore the laptop to a previous version of Windows.

  Thank you.

• WD5000H1U car has become a legacy product and we have no plans to create a firmware for compatibility with Windows 7. __

  I got this response from Western Digital on my old hard drive My Book Essential Extermal.

  Thank you for your response.

  Really, I apologize for the inconvenience that you are experiencing currently. Unfortunately, this disc became a product and we have no plans to create a firmware for compatibility with Windows 7.

  I hope that we have met your expectations today and that you are satisfied with our service. If you have any other questions, just reply to this email and we will be happy to help you further.

  Sincerely,
  Nestor V.
  Western Digital Service and support

  If you encounter any problems with your external hard drive, this could be the problem.

  Well, don't know how it happened, but it works.

  Last night I went on the Web site of WD and downloaded

  1 EssentialEliteFirmwareUpdaterv1.032_1.0.7.4
  2 WDSmartWare_Software_Updater_For_Windows_1_0_12

  After I did it, I unplugged all of my other drives and I tried everything again with the missing disk, but it still does not.

  This morning, I reconnected all of my readers, and he started to read the missing disk.

  The version of the driver file is now
  6.1.7600.16385(win7_rtm090713-1255)

  I'm not sure what did the trick, but maybe this will help someone out there.

  Good luck!

• Reference Dell photo printer 720 compatibility with Windows 8

  Is Dell photo printer 720 compatibility with Windows 8. ?

  You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

  It is not compatible with windows 8 - see THIS

• CS6 Compatibility with Windows 10

  I bought the whole adobe CS6 suite and I really need to update my computer, but I fear that my adobe software will stop working. I saw where cloud applications are compatible, but I didn't know where this question is still answered. Can someone please answer this question as Adobe support is unable to connect with.

  TIA

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  -so if you have an older, program update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or to run it as Administrator http://forums.adobe.com/thread/969395 to assign permissions FULL said... yet, but it is sometimes necessary for Adobe programs

• Adobe Acrobat 5.0 compatibility with Windows 7

  Adobe 5.0 compatibility with Windows 7

  It is not compatible and will not work.

  Mylenium

• OfficeJet 4500 Wireless - MacBook it installs with USB, but can't find it on the network

  Help! I just bought a new MacBook (OS 10.6.4) and try to use the HP Officejet 4500 Wireless with it. I bought the printer a month or two ago and it has been implemented on my wireless (a Netgear - WNR2000 router) and works very well with my old iBook G4 and the Windows PC at home. My new MacBook is connected to the fine of the Internet, but when I went to use the printer, it seems to install ok, make settings IP etc. of the printer on the network, but it's not far past. He says that the printer is "unreachable" or some such nonsense and refuses to see it on the network. I tried both with and without the CD installation, and after you have uninstalled the software HP to uninstall and reinstall in the system of preferences--> Print and Fax settings. But he only sees the printer if I connect it with USB, which goes against the reason for which I bought it.

  I ran the software update and it has found a new version of the software to download to the printer when connected via USB. But there seems to be no way to convince him to find the printer on our network wireless

  Any ideas?

  -Mary

  Wow - I solved the problem. How ridiculous of a solution is that?

  I saw a mention on another Board need to have a SSID for the network of less than 6 characters/letters to get the Mac to work with some other printer/router configuration.

  So I tried here - since I had a network SSID of 7 letters.

  (1) I went in my screen to config the router and changed my SSID to one that was only four letters. I also took the static IP address for the printer, I had just set up (so for those of you watching at home, ignore my comment on this tactic, it was a herring!) leave the settings as they were before I ate with it.

  (2) I then restarted the router, the computer and the printer.

  (3) I first put in place the new SSID on Mac (change the SSID of the router to the old password only left, so it was just a matter of returning the password on Mac, when it entered into the 'new' network). I checked this by seeing in screen config the router if the Netgear now he showed in his list of connected devices (it wasn't before, and I was suspicious that he was some other weird problem, if the Mac has used the Internet very well). He did it!

  (4) then I used the front panel of the printer to go into Options--> Menu Wireless--> Setup Wizard and configure the printer again on the new name of the network SSID. Then I went to the Options--> Print the report--> Config network. It would therefore be to print a page giving the State of the connection confirming that it was the network.

  (5) then I went back for the Mac and use it again the screen of the router config I confirmed that now the printer was also showing up on top of the screen of connected devices (it wasn't before, now she and Mac have been listed!). Then I opened system--> print and fax preferences and tried to add the printer again. This time he finds immediately on the network (using the so-called Hello?), and since I already had the software update (using the steps suggested above) that she already had the correct printer software to use. Wireless printing fine now... After all this noise.

  So, apparently, PrintDoc, you need to add a small little by this spiel you gave me above - to install a printer wireless on a new Mac with a working wireless network (at least one with a Netgear WNR2000 router), the SSID of the network should really be only a couple of long letters (4A worked in this case but not 7). Why, I have no idea. Ridiculous, like I said.

  Thanks anyway.

  I hope this discovery helps someone else too!

  -Mary

• HP Officejet 7500 has compatibility with Windows Server 2012R2

  Dear team,

  I would like to know if the HP Officejet 7500 a is compatible with Windows Server 2012R2 since there is no drivers for this OS.

  Thank you

  Mega-Support,

  Thanks for posting.

  Under Windows, you can connect a printer to a computer via USB and be able to print. However, since there is no software for it on the HP site it's all what you can. Unfortunately, you will only be able to print using the USB method.

• HP Officejet 4500 installs wireless on the laptop Windows 7 computers 2, but not on the 3rd

  Help a friend to a printer with the HP all-in-one Officejet 4500 problem.  Although it has been installed on the laptop of the wife of my friend, he would never print.  When pointing the mouse on the icon of the printer the printer and the devices page, this would indicate that the printer is offline.   It was not the case.

  I used the disk supplied with the printer to install wireless on their other two laptops of W7 and installed with a wired connection on their tour of W7.  The printer properly on all PC functions.

  I used the uninstall level 4 OJJ5700 washer 8 HP utility to remove any trace of the product of his laptop and then again used the disk to install the printer.   As with the other 2 laptops, I selected a wireless connection, but unlike the other 2 it finally gives me a msg that the printer is not found on the network.  Then it prompts me to temporarily connect the laptop to the printer with the USB cable, saying that once it finishes the installation of the software, that we can then make it wireless.  It never ends install even with the cord.  I went through this process twice, and both times it sitting there on the stage of configuration for an hour more before I killed the task.

  The printer is sorta installed on the laptop, because it allows to print with the cable, although the name of the printer has a. TMP extension in the devices & Printers.

  All laptops are connected to the same network.

  Anyone who has never met this before and come up to the top with a solution?  The laptop seems to work otherwise beautifully, although I suppose it wouldn't hurt to run a full scan of Malwarebytes.  I never really knew the problem, it's viral, but I just ran out of time today before that I could make sure...

  Hi boweasel,

  Please confirm the steps for me. At this point, you did all the steps of troubleshooting of the printer, which should solve the problem. At this point the printer works with two other computers, it seems it's something with the operating system on this computer. I suggest contacting the manufacturer of the laptop on a recovery or disturbances to the OS.

  Please let me know if you are able to install and impression after working on the operating system.

  Thank you

• OfficeJet 4500 driver will not download to Windows 8 - "Download".

  Try to download the full Officejet 4500 Wireless download to a new PC 64 bit of Windows 8.1.  When download reaches 100 MB exactly, it stops: "download interrupted."  Click on 'summary' and downlaod again and 'interrupts' to 100 MB.  Tried with antivirus on and outside, on and outside printer.

  Thanks for your help, but I already got it to install using the Installation Wizard under "diagnostics and utilities" (or something like that) listed below the option 'download now '.  It worked perfectly (all 300-some MB) and worked as one would expect in (in other words, just like the installation from a CD that comes with a new printer).  HP really needs this option "front and Center" rather than downloading raw - I mean, who's going to think to go to the section "diagnostics and utilities; most of the people go just to see "start downloading now", click that and feel frustrated as I did. I have found that the wizard by chance, frustration.  I think most of the users are like me, they want a quick, easy and fool-proof to get the printer to work.  We are not in the manipulation of files or refreshing / re-installation of operating systems.  Keep it simple for us, the Luddites.

• Compatibility with Windows 10 printer

  It's the all-in-one Officejet 6600 compatibile with Windows 10?

  Has been answered many times already. http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/Windows-10-printer-compatability/TD-p/5162839

• HP Officejet 4500 G510n-z Wireless connection print Windows Vista, but not from Windows 7

  Printer HP Officejet 4500 G510n-z seems to be connected to my Dell laptop with Windows 7 on HP Solution Center page, but does not print. Documents just get stuck in QC. It was printing then it wasn't so that's when it wasn't. The printer works when I print from a laptop more old Vista. The last time this happened, I uninstalled and reinstalled the HP software and that doesn't seem to help. Then, for some inexplicable reason, impression began to work. It has now stopped working again. I can scan the Windows 7 laptop but not print. I tried all the troubleshooting tools that I could find without success. Thanks for trying to help.

  Hello-

  It could be caused by a couple of things:

  1. firewall on PC or router.

  2 interference (microwave, cordless phone base @ 2.4 Ghz)

  3 distance from router

  4 corrupted printer driver.

  Turn off the firewall you have and you move anything that can cause interference to router.

  If none of the above solves the problem, I'll have to install a different printer driver.

  Click Start.

  Go to devices and printers.

  Click Add a printer.

  Add a local printer. Create a new Port, then choose "Standard TCP/IP port.

  Click Next.

  TypeRegeditdans in the box 192.168.1.12 IP address or host name. (uncheck the box 'Interrogate the printer')

  Click Next.

  When the printer list opens, click windows update. (it takes a few minutes)

  After the box appears, choose HP (not Hewlett Packard) on the left and choose "Deskjet 990c" on the right.

  Click Next, the default value and end.

  Try to print using the printer Deskjet 990c.

• HP Officejet Pro X576dw: HP Officejet Pro X576dw is not compatible with Windows 10

  I am looking to buy this printer and I was wondering if it will work.  HP Officejet Pro X576dw is compatible with Windows 10?

  The Officejet Pro x576dw has a driver available for Windows 10 full featured.