ScanJet adf scanner c7670a stopped automatically feeding. It scans from the glass. OSX 10.4.11

Similar Questions

• LaserJet M1212nf ADF does not pick it up when scanning of the Acrobat PDF document

  I recently bought this multifunction machine.  The software installed without any problems.  When you copy, the documents are taken from the ADF correctly, but if I use Adobe Acrobat to scan from the computer in PDF format, it does not appear to recognize the ADF and the scans from the glass.  I have not tried scanning directly from the computer in PDF format.  I could not find anything in the user manual or the HP support that relates to this.  If anyone had the problem and knows how to solve this problem, I would really appreciate it.  Thank you!

  Hi Cathy-IT,

  You should be able to go to the HP scanning application settings to change the DPI setting. It seems that there is a problem with this version of Adobe Acrobat (see link below). You have an older version of Adobe Acrobat, you can test with?

  http://forums.Adobe.com/message/4594637

• 8710: 8710 double scan from the ADF

  Please help me understand if the HP OfficeJet Pro 8710 supports the double scanning from the document feeder. In http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-4026ENUC.pdf , is the line: "breeze through with double scanning multipage documents and an automatic C1900 of 50 pages (a single pass double scan 8730/40 models).  How is - a scan a stack of documents recto / verso on a 8710?

  For comparison, consider how the 6700 manages.   (A) on the computer, open "Scan HP."  (B) select "ADF." (C) place a check next to "Scan both sides (duplex).»  (D) place up to 20 originals in the document feeder.  (E) click on "search". (The ADF feeds the originals in the scanner.  On the computer, a pop-up scanning HP says: "prepare to analyze the other pages of your two-sided document.  To analyze the other side of pages 1. Remove the pages from the output tray.  Do not change the order of the pages.  2. without turning the pages at the wire, turn and place them in the document feeder according to the landmarks of placement on the device. 3. click OK when you are ready. ") F) after placing the originals rotated in the document feeder, click on 'OK '. (The HP scanning software stores the scan on your computer.)

  @gregspinney

  The technical data sheet information in small print:

  3 the single pass 50 sheets, ADF automatic duplex is available with only models 8730 and 8740. 8710 and 8720 models have an ADF 50 sheets of double mechanical

  While scanning two-sided "single pass" is not available on the 8710, it should provide an automatic duplex scanning.  The leaves should go through the printer, print one side, flip and scan the second side.

  Printer:

  All-in-one printer, HP OfficeJet Pro 8710 range

  Full software features:

  File name: OJ8710_Full_WebPack_1881.exe

• How do I know what programs are safe stop execution or remove it from the startup of Windows 7?

  How do I know what programs are safe stop execution or remove it from the startup of Windows 7?

  original title: start up programs?

  Hello

  You can use these to control which startup programs. Many others settle
  start-up haven't really needed to be there. Such as Acrobat Reader (Adobe), WinAmp
  Agent and many others who are responsible for pieces of themselves to get started more quickly (not a problem
  on the machines of today ' hui) and of course they can control the files they support (to be
  course you continue to use only). Those who are only common examples and didn't want to not say
  as a slam on these programs very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/welcome-to-the-performance-and-maintenance-Forum/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• You can scan from the feeder automactic using capture and scanning hp

  You can scan from the ADF using capture and analysis?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it seems you are trying to use the scan from ADF.

  It would be great if you can provide some clarification on this issue, so that I can help you, or move you to the right team.

  What is the model number of the printer/scanner

  Consult the manual of the scanner and follow the instructions on how to scan from the ADF

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Please come back with more information on the issue so that we can help you better.

  For any help about Windows, you can still post on the Microsoft Community Forums and we will be happy to help you.

• I am able to scan from the scanner and printer, but can't seem to scan onto computor

  I am able to scan from the scanner and printer, but can't seem to scan on computor, what I have to do.

  Hello

  I suggest you to update the latest drivers for the scanner\printer and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check out this link:
  http://support.Microsoft.com/kb/323166

  It will be useful.

• All-in-one HP 1536dnf: cannot scan from the ADF and glass to a single PDF file

  Hello

  There is a user who needs to scan some papers, but he wanted to do the following:

  -scan of the papers of the ADF

  and

  -scan of glass papers

  and he wanted to merge all this into a single PDF file.

  The announcement of the user he could do before, we implemented a new computer.

  On my side, I did the installation of the drivers and as the default scanning software and indeed the scan works, but once you star scanning from ADF he will not identify any which paper on the glass and displays the message "no book on ADF.

  And when you start scanning from glass it will identify ADF even if there are some papers. Instead, it will scan the same page, if she stays or it will scan empty.

  Well. It became a long text, but any help will be welcome.

  Thanks in advance

  Hello

  It works this way because they are TWO different operations. There are a few free software around which allows us to merge several PDF files into one file. You should probably do this way. The following link is one of them:

  http://www.PDFSam.org/download/

  This free product allows you to divide a large file to many small files (such as the extraction of the chapters of a thick book) and also merge several pdf files into a pdf file.

  Note: use the free.

  Kind regards.

• HP Officejet Pro 6830: do not scan from the adf

  Hello

  I'm trying to scan on my all-in-one printer, but it won't pull the paper down in the adf.

  I know that the adf works because it will copy from there, and I try and managed to scan until the thing "original charge" appears on the printer screen.  It is scanning, but the page is not mobile.

  Any ideas?

  HI @bekf

  Open the HP Officejet Pro 6830 software (it is wither appears on your dektopm or under all programs > HP > printer folder).

  Click on scan a Document or Photo and check the scan source is defined as "Use (if installed) document feeder", and then click the scan button and check for the difference.

  Please let me know of who can help,

  Shlomi

• OfficeJet Pro 8610: Cannot scan from the document feeder

  I'm unable to scan a document using the ADF.  This has never been a problem until I recently updated my OS from Windows 7 to WIndows 10.  Nothing I found online seems to solve my particular problem.  My printer is connected to my Lenovo ThinkPad W520 computer by USB, this is what I've learned so far:

  I can print without problem.

  I can copy a document from the Board without any problems.

  I am able to copy a document using the charger, so the charger seems to be working.

  I am able to scan a document from the tray, then the scan function also seems to work.

  I checked the updates and the printer indicates that the firmware and software are up-to-date.

  What can I do to once again allow me to scan a document from the document feeder?  Your help would be much appreciated.

  Yes, under "Source", I got "Use Document Feeder so burdened" and I got the beep signaling that the document is loaded in the feeder.  So, it wasn't the problem, but I do it thanks for trying to help out.

  Fortunately, I finally found a solution, although it took a job.  I have reset the printer to its defaults, uninstalled the printer (and its drivers) from my computer, downloaded the latest HP drivers (even if the printer had stated that he was "aware" before all this effort) and reinstalled the printer from scratch.  A lot of work, but the printer works now as it did before my upgrade to Windows 10.

  While I'm not a "techie" and do not really understand why things work the way they do, I hope that my efforts may provide ideas for others who may have similar problems after upgrading to Windows 10.

• How can I stop my Vm to boot from the network?

  OK, newbie still problems here!

  I have an iso on the data store and the parameters of the virtual machine pointing to iso with "connect to feeding on ' and 'connected' created, but it keeps trying to boot from the network and shows:

  Start-up of AMD Am79c970A NET

  Copyright info blah blah

  CLIENT MAC ADDR: vlah bla

  PXE - M0F: no boot file received

  PXE - M0F: Exit Intel PXE ROM

  Operating system not found

  I don't see anything I've missed, I searched this forum and tried Googling.

  Thank you

  Hedley

  Are you sure that the CD is a bootable image?

  Try with an ISO file.

  André

• How to stop automatic advance for one of the models of Captivate brothers e-Learning?

  Hi, I use the model direct-blocks-of-info 21660 and I removed the check marks because they are not necessary for my purpose. However, after that I removed the checkmark, the audo slide moves to the next slide before users are able to complete by clicking on the tabs. Is there a way to stop the auto-avancement without checkmarks? Thank you!

  Could you please send this question on the site of brothers in e-Learning? It is a Captivate forum, user to another, and it is very difficult to get an idea of the configuration of all of these features in Captivate. I suspect it has to do with breaking a tip (or shared) action, but not exactly where. If you subscribe to any object that is used in a tip action, the command for that action is no longer valid and will be replaced by "Continue", which could explain the behavior. As a temporary workaround: do not remove the check marks but making them "invisible" by changing their alpha to 0%, if these are images, or changing the color to the background color if they are characters.

• HP Office Jet 8600 Premium: scan using the glass rather than the feed document dumpster

  Hello, I have the above printer and I would like to analyze an old photo using the technique of the flat bed scanner rather than feed the loading of documents. Can help you with this?

  Thank you

  Casey20131

  Sure.  In your scanning software select flat instead of document feeder.

• IJ Scanner Utility will print but not scan from iMac

  I have used this gun for more than a year Mx920 - no problem. Had a paper jam. Erased. Can always print and copy. But when you try to scan the computer, I have the error 2.156.0 Jet "scanner is off or usb is not connected".

  Re-downloaded and installed the drivers. Once I installed the drivers 'successfully', I can't find where to use it.

  Print but not scan. Woman can scan his MacBook. Therefore my iMac to my printer.

  10.10.5 Yosemite

  Try to launch the Image Capture. In the left pane, the Canon MX920 should show under the shared section.

  Another option is the Canon IJ Scan Utility (Applications/Utilities/IJ Scan/Canon IJ Scan Canon utility)

• Contacts E-mail only automatically add to Contacts from the Exchange (Office 365)

  Don't know if anyone else has this annoying problem...

  Something is create new E-mail contacts only in my 'Exchange' directory of contacts OSX. They do not appear in the 'Contacts' Exchange directory (I use Office 365 for enterprises).

  They seem to have been created emails, I sent in the past, but if I empty my "sent" folder it still happens. It's boring because very often they are duplicates of contacts I already have and they pop up in the email "to:" invite the field and in the calendar.

  Remove Contacts works for a day or two, but then they reappear later.

  Looking at my Office 365 people via a browser, I can't find a directory 'changes everything '... Just 'Contacts' and "Skype for Business Contacts" and only rogue e-mail contacts are not found.

  BTW I have disabled "Contacts are in the mail" in Contacts > Preferences.

  I don't know if there is a problem with OS X or with Exchange.

  Any ideas why this happens?

  I have exactly the same problem (already since OSX Mavericks) and it is very very annoying because he not only mess Contacts, but also the results of research in Mail. I filed a bug report last year, but nothing has happened with it.

  I have no idea how to solve this problem!

• WRT1990AC stop 2.4 GHz WLAN from the external drive is connected

  I have a very strange problem with my newly bought WRT1900AC

  Everything works fine, but as soon as I connect my USB to the router (whether on USB1 or USB2 port), 2.4 GHz WLAN no longer works.

  Oddly enough, the thinkgs still router, 2.4 GHZ WLAN works very well. But no matter what device will attempt to connect to it will tell me "unable to connect".

  As soon as I unplug the USB, the router restarts (why?) and the 2.4 GHz is available again.

  Note that this affects only the 2.4 GHz WLAN, not the 5 GHz or the LAN ports.

  What happens here? Is there something wrong with my USB? Should we neet a special format perhaps? Or is this a known bug?

  The router firmware version is 1.1.8.164461

  Each USB device has a different driver. Not all are configured in the firmware of WRT1900AC:

  List of tested USB hard drives and printers for the Linksys WRT1900AC