Windows 7 will not recognize driver for HP Scanjet 5370c scanner

I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

http://www.Hamrick.com/

Tags: HP Desktops

Similar Questions

  • Windows 7 will not recognize the dvd drive

    Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

    It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

    It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

    What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

    Hello

    If the drive is viable:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951


    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Windows 7 will not recognize my iPad

    Windows 7 will not recognize my iPad when it's connected via USB port

    Hi Richard,

    1 have you tried the steps in the post above?
    2. the problem occurs only with the ipod?

    Method 1
    I suggest you run the hardware and devices Troubleshooter and see if that helps.

    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2
    Try the steps from the following link (applies to Windows 7)

    Tips for solving problems of USB devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  • Historical files Windows 8 will not recognize the new external hard drive

    I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

    I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

    I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

    I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

  • Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

    Hello
    first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

    Thank you for the hope

    creepyz

    Hi creepyz,

    Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

    1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

    2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

    3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

    4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

    5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

    6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

    See please visit the link below which deals with this subject.

    http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

    Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

    ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

    ·         http://forums.Xbox.com/ Forums

    Concerning

    Arona - Microsoft technical support engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows 8 will not recognize my second monitor

    After the upgrade to Windows 8, the computer does not recognize my second monitor. Disconnect and reconnect the device after it remains unknown. I am running a Dell Inspiron all in one office. Do I need to install a driver so that he will recognize the secondary monitor? If so, which?

    Access

    Control Panel\All Control Panel Items\Display\Screen resolution

    and make sure that both monitors are indicated and "Extend desktop to this display" is selected for each monitor.

    If both monitors are not displayed, try clicking on "Detect".

    ==================

    Check Device Manager to see if the card video cards (if you use more than one) and both screens are indicated in the list of devices.

    Tom Ferguson

    Later:

    Try to go to the Dell website, enter your service number (usually located on a label on the back of the case) or the installation allows to detect the pattern.

    http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn & ~ ck = mn

    See if there are files on your computer for Windows 8.

    ==================

    Another option is to use a USB to VGA or USB key to video DVI 'card', according to which will accommodate the Dell) has no Windows 8 pilots. For example. I use a unit of IOGear (USB to DVI). After starting Windows 8 Pro, it was detected and drivers automatically downloaded and installed for it.

    TF

  • Windows xp will not recognize or list the wireless connection.

    Original title: we changed wireless routers and now windows xp will be same not recognize or the same list if wireless connection 3 computers in the House will be

    Under networkconnections the old wireless router, or the other is visible.   I tried toads new link also with no success

    Hello

    1. What is the brand and model of the computer?

    2. who is the provider of Internet (ISP) Service?

     

    Follow these methods.

    Method 1: How to fix wireless network connections in Windows XP Service Pack 2
    http://support.Microsoft.com/kb/870702

     

    Method 2: To create a wireless network, you can follow these steps.

    a. click Start, click run, type ncpa.cpland click OK.

    b. in the window network connections, right click on the wireless network connection icon and then click Properties.

    c. in the wireless network connection properties, click the wireless networks tab. If you do not see a wireless networks tab, your network card can not take over the automatic Wireless Configuration service.

    d. under preferred networks, click the Add button.

    e. in the network name (SSID) box, type the name of the access point, and select the parameters according to your network requirements. This setting will match the configuration of your router or access point. If you have a router or wireless access point, and then select Wireless Ad - hoc mode and use the same network name that matches other computers.

    f. click OK

    g. under available networks, click View wireless networks.

    h. in the wireless network connection dialog box, choose a network by clicking on its name and then click on connect.

    Reference: set up a wireless network

     

     

    For more information, see this article:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  • Windows Xp will not recognize my powershot SX130 IS

    Tried everthing, all USB ports, works OK on another computor, checked with canon, they have been of any help whenever I try and down load, I get a message "does not recognize the camera.

    Hi donaldPaul,

    1 have you made changes to your computer recently?

    2. I suggest you follow the methods given and check if it helps.

    3. your camera is detected in Device Manager?

    You can also try the steps in the below mentioned links.

    A digital camera is not recognized in Windows Vista or Windows XP

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    Windows XP does not a digital camera Canon PowerShot S100 (Applicable for Powershot SX130 IS also)

    I hope this helps.

  • My Windows 7 will not recognize my HP 1210 printer

    I am trying to install my printer HP 1210 all-in-one on my Windows 7 PC. It worked well on my XP PC. When I insert the disc printer through the whole until it reaches the part where plug you in the USB from the printer. At this point, the window is grayed out and you can not move forward.  Most of the forums indicate that Windows 7 had the pilot already in the software.  When I plug the USB in, all I get is the beep that the CAP is gone, without window telling me that the computer recognizes that it.  Later, I noticed that the disk is for Windows 98, 2000, ME and XP, not a word on Windows 7.   Every time I try to print, my PC says to install a printer.  I'd appreciate any help...

    Hello

    The printer is too old, no more support the Age of Vista or at least 7 years:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=90764#n187

    Please follow the instructions below and hope to get a generic driver for you to print basic:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=90764#n187

    Otherwise, it's time to buy a new printer.

    Kind regards.

  • Windows 7 will not assign drive letter to e-SATA drive

    I have a Seagate 1.5 TB SATA disk mounted in a Thermaltake case which has an e-SATA connection. The drive has been formatted NTFS on a Windows 2000 computer and a backup on this computer has been correctly written to disk. When I connect this drive to my 64-bit Windows 7 computer (Gigabyte GA-P55M-UD2 m/b using an e-SATA port connected to the Gigabyte SATA2 chip) Windows recognize the drive where the disc is displayed in 'Remove hardware safely', but Windows 7 does not allocate a drive letter.

    The disk appears in disk management (currently Disc 3) without a drive letter. When I right click on the blue band to the right of the box Disc 3, Windows cross-hatches the white rectangular box below the blue band. When I click on 'change drive letter and paths' I get the following message «the operation failed because the view is not updated...» "None of the proposed remedies work.

    The results are the same regardless of whether I start the computer with the drive connected and running or hot plug disk.

    My e-SATA 1 TB Fantom drive works fine on this computer.

    I would appreciate any suggestion you may have.

    -gyveri

    Hello

    Look in Device Manager if there is an item under "storage volumes", called "unknown device". If there, uninstall the driver to do this and as soon as I reconnect the windows disc and see if it assigns a drive letter. If it isn't

    Try this;

    Go to Device Manager

    (1), look for an entry that says "Unknown disc" or something similar. This entry may not be marked with the error icon.

    (2) after you locate the entry, right click and select "Uninstall".

    (3) after you have uninstalled, press F5 or select "Search the hardware changes" in the action menu.

    (4) the pilot is then reinstalled correctly.

    P.S - I found these answers in other forums showing the same error message. Try them and let me know if it was just a waste of time.  :-)

    Scott

    I'm certainly not one of those who need to be pushed. In fact, if anything, I am the prod.

  • Windows 8 will not recognize my product key!

    I have had up to Windows7 for windows 8, Microsoft sent an email me my product key, but I want to do a clean reinstall. When I enter my product key reinstall windows do not recognize.
    When I ranked up 7 to 8, I kept all my old settings, but this causes all sorts of problems so reinstall it.

    any help please, I tried Microsoft on the phone but I do not understand what he says! both for technical help from Microsoft! (USLESS)

    Ken

    Make sure that you enter the characters.

    Do not enter hyphens (hyphen) who will be registered automatically.

    Do not press the SPACEBAR when you enter the product key.

    Make sure that you do not enter the wrong characters.

  • Windows 8 will not recognize discs in my dvd, DVD or CD player?

    I've upgraded to Vista to 8.  Windows * does not recognize the discs loaded in the dvd player.  Computer, you can see the drive but it won't read the disc in the drive.  I tried to update the drivers, 8 says that they are up-to-date.  I have run the Diagnostics Dell, said that my computer works well.  Have uninstalled and reinstalled the drivers for the dvd drive, no change.

    I installed windows media center, without change.  Do I have to install a soft DVD and which?

    This has been the most frustrating windows upgrade of my life

    Hello

    Readers appear in the computer?

  • Windows 7 will not recognize or sync Pocket PC which is connected via usb

    Hello

    I am trying to sync my Pocket PC data (Pal my ASUS a686) on my computer (Windows 7 Enterprise). I think that if you had Windows XP, we would use Active Sync. However, it's windows 7, so I think that I use Windows Mobile Device Center. In fact, I used the center of the device before, but it has been a week to try to download the data again and it no longer works. He is very picky. But we need our data and cannot wait for the day that he decided to download.
    So I uninstalled the center of the device (the tip of a chat room) and now I can not re - load it. However, before I even uninstalled, the problem returning to the top, it was my computer does not recognize the device connected via usb.
    Code 43 continues to come does not recognize this device. And yet it is plugged. I keep trying to restart, plug the unit in different orders, send good energy, etc.
    I did a soft reboot of the pocket pc the last time, but that makes you lose all data on the pocket pc and we cannot lose this data. Finally, it is for the eco-counter software. When it worked, I hit the sync button and the data were downloaded. Now... He says just connect me please my pocket pc when it is connected. Why!
    Thank you
    Cole

    On the Pocket PC, try going to "start |" Settings | Connections | USB to PC"and unchecking the checkbox"Enable advanced network functionality. "

    HAL

    --

    HAL Hostetler, TCE

    Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

    www.kvoa.com - KVOA television, Tucson, AZ.

    Live Hot Licks -www.badnewsbluesband.com

  • Windows 7 will not recognize gps

    I tried to reach my gps Magellan 3045 to windows 7, but it does not define a new drive, so I can access it. I need this so he will appoint the drive: Magellan, then I can use contact manager that they use. How can I get it to display properly. New drivers and how to get magellan uses a pilot Locator, you have to pay.

    I tried to reach my gps Magellan 3045 to windows 7, but it does not define a new drive, so I can access it. I need this so he will appoint the drive: Magellan, then I can use contact manager that they use. How can I get it to display properly. New drivers and how to get magellan uses a pilot Locator, you have to pay.

    Magellan is the manufacturer and the only place you should trust to get information on how to correctly use the device (like getting the drivers and software so it can communicate with any OS)-they are your main line of support regardless of the OS you are using.

    Is what SPECIFIC 3045?

    You have installed "Content Manager"?
    http://www.magellangps.com/ContentManager

  • Windows 7 will not recognize wireless adapter

    Hello

    My hard drive was recently started giving me problems so I just bought a new SSD. It is a desktop computer with a wireless PCI card. I have not yet removed the old HDD and when I start Windows with this one, I am still able to use the wireless adapter (both facilities use Windows 7)
    When I go into Device Manager and try to search for hardware changes on the network cards (on the installation of the SSD), nothing comes up.
    Network cards that show on the old HDD:
    Map Microsoft Virtual WiFi Miniport
    Realtek PCIe GBE Family Controller
    TP-LINK 300Mbps Wireless N adapter
    Network card which shows on the SSD:
    Realtek PCIe GBE Family Controller
    The SSD also indicates:
    Other devices > network controller (has a yellow triangle with an exclamation mark beside it, but couldn't find an update)
    I can't find a driver for the TP-LINK wireless network card, but I understand that this feature needs to be integrated to Windows in any case - I do not remember having to install whatever it is extra to do work on the old HDD.
    Any help is appreciated. Thank you!

    If it's your TP-Link adapter

    http://www.TP-link.com/en/products/details/?CategoryID=240&model=TL-WN821N#down

    Download the driver from the V4

    (Possibly on a key usb on another PC, then install it)

    I have this kit and it runs on win7 & win8 both with the above driver

    Realtek PCIe GBE Family Controller is the correct controller for your motherboard (and only one)

Maybe you are looking for

  • Tecra S1 - size HARD drive can I use

    Hello I have a Tecra S1 and looking to upgrade the hard drive because it is only the 30 GB model.I found the HDD compatible in terms of size, but my question was if there was a restriction on the ability of the HARD drive, or I can go to any size I w

  • HP laptop: laptop can't keep not fresh at all

    Laptop battery charge so to connect if I use it. Argos bought this year, but they say is not their problem. Probably under warranty for repair / replacement? Top of the Tower in otherwise perfect condition

  • "Sleep" mode does not work.

    Original title: I am running windows xp home w/svc Pack3 I have my set screen under pwr options to close after 10 min., but it does not do so for the last day

  • Programes and files

    If I switch to Windows 8 consumer priview all files and programs I had on my computer, it was Windows XP will be available to use once I switch to Windows 8 consumer priview.

  • Opening of shutoff on Thin Client T610

    Greetings, I was expecting to use a thin client T610 as a display remotely to a legacy system, but met a wall.  Every time that the application tries to send a display for the customer, the display does not open and the system hangs. I reproduced the