HP Scanjet 6988 don't print my images

Similar Questions

• Is there a driver compatible mac out there for printer Canon image class MF3240?

  Just got my first macbook pro. I am trying to connect my printer Canon image class MF3240 and discovered that they are not compatible. I've seen drivers on different web sites, but I am reluctant to use them.  Are there any safe over there, or do I need a new printer?

  OS compatibility

  Windows® 7, Vista, XP, 2000

  When imaging is done on the computer, and the manufacturer does not provide a driver for Mac OS X IN EVERYTHING, does support very difficult.

• Please help me? Install printer Canon Image class MF5750 (USB)

  Can someone help me solve this problem:

  My laptop is HP running on Windows 7. I am trying to use my printer Canon Image class MF5750 (USB)

  I installed the driver: MF5730_5750_MFDrivers_Win_x64_us_EN_7 from the Canon website.

  However, after that I installed the drivers, my computer recognizes that the scanner and not the printer. I'm a newbie to this!  What have I done wrong or left out?

  All to first uninstall this driver from the computer and restart. Then download and install the driver appropriate for your system, if you have a 64-bit or 32-bit system?

  Do not connect the appliance until the program tell you to do.

  http://consumer.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5750#DriversAndSoftware

  mohanad

• Where did the installation to print multiple images per page?

  The Panel on the right in the 'Print' module has changed. Previously, the Committee was up and down, 'Image Settings', "Rules, grids, and Guides," 'Cells', 'Page', and "Print Job" with the 'cells' dropdown that gives me the choice of "add to package" where I could easily add and adjust the size of the cells. Now, (I have not downloaded anything) panels has from top to bottom, 'Settings of the Image', 'Layout', 'Guides', 'Page' and "Print Job" and I don't see a way to print several images (either the same of different images) on the same page.

  This should really be in the Lightroom forum!

  However, on the left side of the scree we do not, what are the parameters? They must be defined for a multiple-image document and not as I suspect one presented here.

• When I click on the + to open a new window I don't like the images that arise. I tried to change that in all: config; Browser.newtab.URL, but it will not

  When I click on the + to open a new window I don't like the images that arise. I tried several times to change that through words: config; Browser.newtab.URL. I put in the site I want and it won't change. I tried to put in: blank and it don't work. I'm obviously something wrong - can you help please?

  Thank you

  If Firefox is ignorant preference browser.newtab.url, the usual culprit is an extension.

  You can open the page in Firefox Add-ons using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons
  • in the Windows "Run" dialog box, type or paste
    firefox.exe "about:addons"

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Do not forget that all extensions are optional, none come with Firefox, and you can learn more about them by checking their reviews on the site of the Add - ons.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• I can not print background images.

  I select print background images already. But I can not print background images yet. (mac firefox 19.0.2). Although I'm not this page (http://support.mozilla.org/en-US/kb/how-print-websites)
  Please advice me to [email protected]. Thank you.

  Same problem here. There was no picture printing problem until the upgrade. Now, they won't print and it's ruin how I run my entire business. Image logo printing on the packaging of the lists, codes bars printing of shipping labels. I deleted the cache and restarted. I also tried other browsers and is it not the problem.

  Any thoughts?

  Thank you!

• I am trying to print jpeg images simple and every time I try to print the file asking to save to the XPS format, and even then he used to feel. What continues?

  I'm going to print an image

  I select the picture and size and press on print
  The computer then tells me to save it to an Xps file, and it will not print it
  Is happening?

  Hello

  1. Have you tried to open the image in another application (other than stick them in a doc) as standard Windows Picture Gallery and printing from there?
  2. You have installed the Microsoft office program on your computer?

  I suggest to set the default printer and check the status of the issue.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Printing an image smaller size of my phone

  I have a HP Officejet 8600 Premium. my old printer would print a picture 4 x 5 when I printed my photo galary on my Iphone, but this computer prints all 8 x 10 how to print small images directly from my phone?

  Download HP Printer Control App from Appstore. The app will allow you to change settings as the image size and the paper size as well.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Just as the title says:

  When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Hello

  It is normal in the Windows Photo Viewer Photo to adapt to the frame is checked.

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

• Windows 8 don't print a report with Quicken 2006. The message is "the PDF driver is not found.

  Just bought a new computer laptop operating system windows 8.  Taken some getting used to but it is to be expected.

  I ran Quicken 2006 since 2006 on \vista without problem.

  Windows 8 don't print a report.

  The message is "the PDF driver is not found.

  Any ideas?

  Thank you

  Rick

  Original title: program programs Application Applications compatibility

  Rick

  It seems that there is no driver installed pdf for quicken.  Your best bet is to contect for the pilot to win 8.

• CC 2015.5 settings dialog Print - Preview Image size incorrect

  I just upgraded to PSCC PSCS5 and the last installed update.

  When I was using PSCS5 I always had problems printing and have not used PS for printing since I Lightroom, which does a MUCH better job of handling the print job.

  I try to print a picture on paper photo 4 x 6 on a new Epson HC-P400 (the successor of the R1900 and R2000).  The Photoshop print settings dialog box, with the preview of the image, seems to show that it will print a tiny part in the middle of the complete picture, even if all the settings are set to adjust the image to the size of the paper.

  I'm afraid to try impression because this same issue has been a problem 5 or 6 years when I used PSCS5, and he would try to print the entire image, spray of ink everywhere inside the printer.

  How can I get PSCC to correct preview and print the image to the appropriate size?

  Here is a screenshot of the image in the main window of PSCC (reduced to 20%):

  

  And here's the print settings dialog box

  

  Note that the preview image is a little bit caught in the middle of the full image. Here is the driver dialog box that appears when you click on 'Print Settings... "in the window above

  

  And the tab layout...

  

  Hello

  would you please share a screenshot for the position and size when you print sessions

  In addition to checking the resolution of the image-> image size

  

• Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose each time now and it's not always r

  Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose every time now and that is not always known.

  Hi jeans37547790,

  Please do mention it below as follows to change the settings:

  Open Acrobat > click file > print > click on advanced > and check the box that says "Print as Image".

  Here is the screenshot:

  .

  

  Let us know if you face any problem.

  Thank you!

  Shivam

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• How to print several images in cs6

  How to print several images in cs6

  Hi Michaels,

  Please visit the following link: https://helpx.adobe.com/photoshop/using/print-photos-picture-package-layout.html

  Concerning

  Tanuj