HP Scanjet 8200

Similar Questions

• ScanJet 8200 installation disk/software

  I have an 8200 Scanjet which was given to me by a friend, but no installation disc. I managed to download the drivers from HP, but the complete installation disk software is no longer available at HP as the Scanjet is out of service now.

  Anyone have or know where I can get this software?

  Thank you

  RussPoz

  Hello

  You are running Windows 8 (or 8.1)? Unfortunately no more support as whown:

  HP Scanjet Windows 8

  Kind regards.

• CANNOT PRINT SCANNED DOCUMENTS

  We use a Scanjet 8200 Scanner. After you have scanned pdf, our HP Color Laserjet 3800dn cannot print the scanned document.

  Error message on the printer - 49. 4 C 02 ERROR.

  Any help?

  Ok

  In the Adobe Reader dialog box print, press the "Advanced" button and check the option "Print as Image".

  That check any change.

• Impossible to get scanner HP scanjet 8250 to work with Windows 7

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  writing in the new message: * e-mail address is removed from the privacy... *

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  What version of Windows 7 do you have? It is 32-bit or 64-bit?

  Have you tried HP support? According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=214599&prodTypeId=15179&objectID=c01909569 here, there is limited support for the 8250 under Win7, which is their way of saying, it may or may not work.

  You can get the driver from here http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=214604&lang=en&cc=us&prodTypeId=15179&prodSeriesId=214599&taskId=135 . Simply choose your version of Win7.

  Many HP products are very picky with their installation procedures. I found that the instructions must be followed strictly in the order as listed, or there may be a problem. If the software has already been installed, it is sometimes best to uninstall it, and then try again. Unfortunately, since most of the documents, it seems the 8200 series was designed more for Mac and Windows.

  I wish you only good luck :-)

  SC Tom

• How can I install my old hp scanjet 2400 driver

  I have not find a driver for my old HP scanjet 2400 driver. Help, please.

  You can download the drivers and software here:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=297430

  install the drivers according to the instructions on the site.

• HP Compac 8200 Elite: Lack of communication Simple PCI driver Code 28

  Problem is I reinstalled Win 7 Pro 64-bit and that you have installed the most all the drivers and it seems to work well, with the exception of the Windows and update in device under the other controller of communication manager simple PCI devices miss a Code 28 driver, I read that I have perhaps need the hardware ID to get a driver so here it's PCI VEN_8086 & DEV_1C3A & SUBSYS_1495103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1495103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  Thank you

  Pat

  Hello:

  You need the driver for this device...

  This package contains the driver Intel Active Management Technology (AMT) for the supported models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69506.exe

  I have two 8200 Elite CMT is then I know this is the driver you need...

• HP Elite 8200 MEI Driver

  Hi all

  I have a new HP 8200 elite. I install a new image with Windows 7 Pro x 64 and I have installed all the drivers I found on HP.com. But I still have 2 drivers to the unknown. I found that both are in the " technology of Directors Active Intel (r) (AMT) 7. "xx ' sp52247.exe but when I try to install it I get this error:

  Installation of Driver: Intel(r) Management Engine Interface

  Version: 7.0.0.1144

  And a popup with the message:

  DAS Setup-Progamm konnte einen oder several Geratetreiber nicht installieren. Installation of Das wird abgebrochen

  In English: the configuration of the program failed to install one or more device drivers. The installation is abandoned

  I try to install it manually in the 'material' of Windows Manager. The 'Intel Active Management Technology - GROUND (COM3)"is now ok, but I can not install the"Intel(r) Management Engine Interface"Hardware ID: PCI\VEN_8086 & DEV_1C3A & SUBSYS_1494103C & REV_04. I'm always getting an error "this is the driver for the found device, but when installing, an error has occurred"

  I event log I have this message:

  Protokollname: Application
  What: Windows Error Reporting
  Reference: 26.05.2011 11:24:54
  Event ID: 1001
  Aufgabenkategorie:keine
  Ebony: information
  Schlusselworter:Klassisch
  Benutzer: Non applicable
  Computer: PC - h82
  Description:
  Fehlerbucket, type 0
  Ereignisname: PnPDriverInstallError
  Antwort: Non available
  CAB-Datei-ID: 0

  Problemsignatur:
  P1: x 64
  P2: 00000436
  P3: heci.inf
  P4: a7c38390ce8a12faafd3ab9433d9bd96407863e1
  P5: HECI_DDI_x64
  P6:
  P7:
  P8:
  P9:
  P10:

  Angefugte Dateien:

  Sharp Dateien einen yesterday are:
  C:\Users\Administrator\AppData\Local\Microsoft\Windows\WER\ReportQueue\NonCritical_x64_5276ad9ac8cfa680c852b7d3e85e75cfdca7bc_09205772

  Analysesymbol:
  Es wird nach einer Lösung gesucht Rubis: 0
  Report ID: 039b0edc-877a-11e0-9419-78acc0b7c4be
  Berichtstatus: 4
  Event-XML:
  "< event xmlns ="http://schemas.microsoft.com/win/2004/08/events/event">."
  <>System
  < name of the provider = "Windows Error Reporting" / >
  < qualifiers EventID = '0' > 1001 < / EventID >
  < level > 4 < / level >
  < task > 0 < / task >
  < Keywords > 0 x 80000000000000 < / keywords >
  < TimeCreated SystemTime = "' 2011-05 - 26 T 09: 24:54.000000000Z" / > "
  < EventRecordID > 1019 < / EventRecordID >
  Application of < channel > < / Channel >
  < computer > PC - h82 < / computer >
  < security / >
  < / system >
  < EventData >
  < data >
  < / data >
  < data > 0 < / data >
  < Data > PnPDriverInstallError < / data >
  < data > non available < / data >
  < data > 0 < / data >
  < data > x 64 < / data >
  < data > 00000436 < / data >
  < data > heci.inf < / data >
  < data > a7c38390ce8a12faafd3ab9433d9bd96407863e1 < / data >
  < Data > HECI_DDI_x64 < / data >
  < data >
  < / data >
  < data >
  < / data >
  < data >
  < / data >
  < data >
  < / data >
  < data >
  < / data >
  < data >
  < / data >
  < Data > C:\Users\Administrator\AppData\Local\Microsoft\Windows\WER\ReportQueue\NonCritical_x64_5276ad9ac8cfa680c852b7d3e85e75cfdca7bc_09205772 < / data >
  < data >
  < / data >
  < data > 0 < / data >
  < data > 039b0edc-877a-11e0-9419-78acc0b7c4be < / data >
  data <>4 < / data >
  < / EventData >
  < / event >

  Microsoft report:

  Version = 1
  EventType = PnPDriverInstallError
  EventTime = 129508754947524284
  Consent = 1
  ReportIdentifier = 039b0edc-877a-11e0-9419-78acc0b7c4be
  Response.Type = 4
  SIG [0]. Name = Architektur
  SIG [0]. Value = x 64
  GIS [1]. Name = Win32-Fehler
  GIS [1]. Value = 00000436
  GIS [2]. Name = INF-Name
  GIS [2]. Value = HECI.inf
  GIS [3]. Name = Treiberpakethash
  GIS [3]. Value = a7c38390ce8a12faafd3ab9433d9bd96407863e1
  GIS [4]. Name = DDInstall-Abschnittsname
  GIS [4]. Value = HECI_DDI_x64
  DynamicSig [1]. Name = Betriebsystemversion
  DynamicSig [1]. Value=6.1.7601.2.1.0.256.48
  DynamicSig [2]. Name = Gebietsschema-ID
  DynamicSig [2]. Value = 2055
  FriendlyEventName is Die Treibersoftware as das Gerät nicht installed werden konnte.
  ConsentKey = PnPDriverInstallError
  AppName = Geratetreiberinstallation
  AppPath=C:\Windows\System32\rundll32.exe
  ReportDescription is Beim Installieren der Geratetreiber as 'Unbekanntes Gerät' ist ein problem aufgetreten.

  Can someone help me? Thank you

  Christophe

  The part of the registry do not exist in Windows 7.

  I discovered its operation this afternoon.

  You need to right-click on the hardware in the device menu, not in the Manager.

  In "start/Geräte und drucker / (yourPC).

  Then you choose the option that microsoft should find a reason via internet and voila.

  I not thought it was as simple as that...

  Thank you very much

  Felix

• hp scanjet 3800 no power

  I write in the right section?  I'm not sure. The site is really complicated and not easy to deal with.

  I have my scanjet hp model 3800, it used to work until suddenly collapsed for unknown reasons.

  my attempts: I connect it to a power source (I tried a few different), but it does nothing to show me that his life, is not even a light... nothing.

  My guess is that something is worng with the power to control device inside the scanner (any ), maybe it burned to the top for some reason any.

  now, what should I do?

  Serial number of the product if necessary: CN764A15CM

  P.S. This thread was moved to HP Service Manager / Service Center Support and Forum of News for Scanners - HP moderator of the Forum

  Hello

  This forum is in fact related to the software.

  Looking for information on a Scanner then please look in the following forum:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

  Could be a problem of supply of power on this thread:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/lost-my-power-supply-what-voltage-do-i-need-HP-ScanJet-3800/m-p/797399#M18182

  Kind regards

  Alex

• ScanJet g4050 not compatible with El Capitan

  ScanJet g4050 no longer works with El Capitan. I have iMac and on the update of OS X 10.11 the scanner stopped communicating with the computer.

  Any suggestions?

  Finally, I contacted HP.  They are aware of the problem. They said they no longer support scanjet G4050. However, they recommend a third-party software that can be downloaded on the net. BUT you will have to pay the money.

  That's what they said:

  The solution that we recommend is VueScan. http://www.Hamrick.com/VueScan/hp_scanjet_g4050.html

  If you pay 80 USD for the software of theVueScan get the scammer as he was running, or buy a new scanner.

  This is the case!

• HP Elite 8200 CMT: Bios Update after the update of Windows 10

  Hello, I've updated my HP Elite 8200 CMT from windows 7 to windows 10.

  In the HP driver download page, there is no updated BIOS for windows 10.

  But I noticed that it is has updated BIOS for Windows 7.

  The question is, can I use it on Windows 10?

  And generally to load OS updates to the BIOS?

  Hello:

  You can remove the base flash BACK of the package of BIOS file folder, simply copy the contents of the file flash BACK on a USB stick formatted with the FAT file system.

  Plug in a USB flash drive, restart the PC, press the ESC key to get the options menu.

  Select F10 system configuration to access the BIOS.

  Select the file menu > control system ROM Flash.  Select the USB flash drive.

  The PC will see the files on the flash drive.  Follow the instructions to update the BIOS screen.

  In this way, it makes no difference what operating system you are running.

  A very important point... I read the last 2.29 installing BIOS causes problems with the W10.

  There is a post on the forum about who...

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Compaq-8200-elite-SFF-slow-reboot-time-in-legacy-BIOS/m-p/5654549#M12815

  I use v2.28 on my HP 8200 Elite CMT and have no problem at all on W10.

  I have read that post and decided to not update the BIOS to v2.29.

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Where can I download drivers and manual for Tecra 8200

  Where can I download the drivers and the manual for a TECRA 8200 (PIII 900/128/20 / CD)

  Take a look at this Toshiba European website:
  http://EU.computers.Toshiba-Europe.com

  You will find a support home page that contains links to the drivers and manuals.
  Then you must choose the * ARCHIVES * in download form!
  This unit is an oldie and so all the manuals and drivers have been moved to the archives.

  Good bye

• Tecra 8200 screen goes black when I use the battery

  When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?

  Appreciate the help!
  Peter

  Hello

  On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version

  You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >

  Welcome them

• Tecra 8200 - what computer laptop model number should I?

  All top
  Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

  I have the following information on the basis of the machine:

  TOSIBA Tecra 8200
  Model No.: PT820E-05WQT-E
  Serial No.: 61276516 G ST820-0

  It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

  Thank you.

  Your Tecra is simply Tecra 8200 and there is no other model number.
  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

  You will then find option for Tecra 8200.

  Good luck!

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.