HP Slate Pro 21 "sleep of death".

Similar Questions

• Slate Pro 12: update Android

  I just got a new slate Pro 12 with Kit Kat installed. In my view, there is an update for the pacifier, but I read online that Lollipop 5.1 is the version to go to.

  Can anyone tell what version of Lollipop this update: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7398650 & swItemId = ob_160433_1 & swEnvOid = 415... is?

  Pax-eterna wrote:
  

  Thanks for the quick response. I've not turned yet, preferring to update first, but I can't do that I suppose that if he is indeed willk Lollipop 5.0 it automatically update 5.1?

  It will automatically update itself when activated.  No need to download anything!

  WyreNut

• Missing Internet icon slate Pro 8

  Hello

  I hope someone can give me some light on this.

  I don't when, but I realized that the Internet (Blue Earth) icon is gone from my slate 8 Pro.
  I think that might occur after an upgrade to Android prayed, resembled a upgrede Mayor.
  I still have Chrome, but if there is a way to get back the original Internet app, that would be great as it is the one that I usually use to navigate.
  In addition there are also 2 cameras, the standard camera and a device nine photo! It is not familiar to me.

  Thank you for any comments on this. Thank you in advance.

  Hello and welcome to the HP support community!

  Slate Pro 8 ready article I just check and see the same thing: after update KitKat, the (Stock) AOSPS browser is gone!

  Googling the subject confirms the fact that this is the result of the upgrade.

  There are sites that offer instructions on how to install the old browser supposedly, but you use them at your own risk!

  There are many free browsers available for download in the game store if you do not like Chrome...

  I don't see the two apps Camera too!  Curious...

  WyreNut

• Sleep of death problem Tablet S r5

  My Tablet S suffers sleep of death problem after upgrade to r5 ICS.

  I did reset to factory several days ago and it seemed that the problem has disappeared.
  But since yesterday, it started again and has happened twice today.

  Overall I am satisfied with the upgrade, wifi better and less flicker.
  Hope this problem get worse.

  Hello
  Thank you for your message
  We are currently investigating why the power button wake you intermittently the S1 sleeping tablet.
  Do you see a flashing green indicator whenever this happens?
  for the time being, performing a [[url = http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C1023464&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=203829332&stateId=0%200%20203827592:2fneqb0t] Soft Reset [/ url: 2fneqb0t]] will allow a power on.
  Once we have solved this problem, we'll post here that an update is available. There is no ETA at this time for resolution.

  We are also aware of the icons of Tablet still does not on the bureau after the calving
  that is addressed in this thread: [url = https://forum.sel.sony.com/viewtopic.php?f=109&t=15209&p=41474#p41474:2fneqb0t] here [/ url: 2fneqb0t]

• How to apply the "Slate Pro Light" using CSS font?

  Hello

  Could you tell me how to apply the font of "Slate Pro Light" using CSS? I have not found a solution for the 'Light' slate Pro variation selection.

  Thank you.

  I usually use the definition of CSS of police-family at the following address on my html and body elements:

  font-family: "Slate Pro", Slate, "Myriad Pro", "BBAlpha Sans", Helvetica;
  

  Potentially adding "slate Pro Light" should do the trick. Alternatively, you could take advantage of the make-weight property when you need a lighter framework:

  font-weight: normal|bold|bolder|lighter|number|initial|inherit;
  

  In this case, lighter, might do the trick?
  

• Save the MacBook Pro - white screen of death

  My macbook pro starts, I get the ringtone to start and then the white screen of death that led to the computer to activate the walk and walk. I bring in my computer for repairs, but I am not able to save anything as none of the start up works. I can not access the disk utility, I tried! I wonder if anyone has experienced this or has any suggestions on what to do before going for repairs.

  What model of MacBook Pro?

  Maybe this problem

  MacBook Pro (15-inch, mid 2010) intermittent black screen or the loss of video quality program is over - Apple Support

  http://www.Apple.com/support/MacBookPro-videoissues/

  What happens if you connect an external monitor?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Put iPad Pro to sleep by keyboard shortcut?

  Is there a way to put a Pro iPad to sleep by just using a Smart shortcut (such as command-Shift-Eject/Power on Mbps)? When already typing on the keyboard (and I want to stop working for a while) it is not very convenient to press on the button / stop of the iPad.

  It is not possible. Defined the iPad to sleep early if it's that big of a concern about you. How annoying this maybe we can to press the sleep button and put the iPad to sleep?

• HP Slate Pro 21 - upgrade to 4.4 KitKat?

  I see comments on problems on the HP Slate 21 dealing with WiFi 5 ghz with 4.4.2... I just bought a 21 Pro slate for Christmans and it's down to Jelly Bean 4.2?  I don't see a migration path supported HP?

  Can anyone help?

  Hello

  An update of KitKat for Slate 21 Pro was released last week.  As the output is made in steps are not available to you, it should become available somewhere in the next few weeks.

  Kind regards

  COWA

  HP employee

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• 8 slate Pro audio problem: headphone output

  Hello

  I bought my slate 8 Pro (model 7600US) to replace my Blackberry playbook. It is the great Tablet (screen perfect last Tegra 4 CPU, battery in good condition, good speakers integrated), but after the use of the Tablet for several days, I am surprised by problems with audio quality of the headphone output. I use mainly compressed with headphones (audio books, Netflix, music, etc.), so when I connected my Ultimate Ears Super.Fi 5 Pro (headphones ultra-sensitive 119db/mW, 12 Ohm), I got very sensitive background noise, artifacts and, what is very annoying - variable pitch tones when changing tone based on the activity of the Wi - fi and load CPU, especially on low volume levels.

  So I tried using headphones from Shure (109db, 29 ohms), less sensitive 4ca as KOSS KTXPRO (106db, 60 ohms) with the same results. HP Slate 8 Pro is not powerful enough to Sennheizer 555 (105db, 120 ohms) but I also had the artifacts and noise of not. Finally I tried junk headset $2 and found the sound sounds and tones perfectly acceptable ground level, but the sound quality with these phones is terrible.

  To compare, I tried all my headphones with Nexus 7, Samsung Note 3, IPhone 5 and Playbook without problem.

  I have returned the shelf at the store and replaced it for the new, but I had similar problem.

  Please let know us, what I have to try the third time and replace the Tablet, or it's problem of hardware design, which cannot be resolved. Is it possible, that developers of HP can fix it in software configuration in a future update?

  I understand, this tablet is not an audiophile device, but when the HP Web site indicates to this tablet: "Tuned by Dr. Dre himself, Beats Audio™ allows you to hear the music the way the artist intended.", it must at least provide acceptable audio quality for most listeners. I love HP Tablet a little, but if audio problem cannot be solved, I have to look for another option like Samsung or LG.

  Updated my slate 8 Pro to KitKat 4.4.2 and looks, that his problem slipped.  With this update, noise and less noticeable artifacts, sound quality is acceptable now, even for sensitive headphones.

• Yoga 2 Pro mode 'sleep'

  I have a Yoga Pro 2. I7, 512 GB hard drive (the more expensive one).

  The computer will not wake from sleep mode. I tried to change sleep settings. I have updated all drivers (this laptop is less than 2 weeks). If I use the settings on the laptop or if I close the lid, it goes into mode "Eve". But Nothiong I do not short-circuit to perform a hard reboot will bring if sleep. Anyone have any suggestions to solve this problem.

  Thank you.

  So I just updated the non-essential microsoft updates, and "sleep" mode seems to work again... If anyone has this problem try this to see if help.

• HP slate pro 21: HP Slate 21 Pro

  How can I connect my hp 21 pro tab in my computer hp laptop pavilion dv5 to use micorsoft office word or excel, or another Web site that are not of the capabilities of a mobile phone or Tablet not in the manual...

  This is an announcement for the HP Slate 21 Pro.  In the section titled 'be productive on the field and in the cloud', the last paragraph tells you about the connection of your slate on a Windows PC using HDMI.  However, it does not you can use the PC to your slate.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Dell place 8 Pro 3G - Sleep / Wake Up questions

  Hello

  A few days ago I bought the Dell coming Pro 8 3 G tablet. I have all available Windows Updates, latest drivers and BIOS of 'My Dell'. Unfortunately, my Tablet has some problems with the mode 'sleep'.

  1. only the 'Stop' and 'Restart' options are available in the drop-down list on 'Power' in the charming bar. 'Sleep' is not available and I can not turn off the screen by pressing the power button / stop on the right side of the tablet. I did a few tests using the powercfg command-line tool and I found, the driver mobile (or hardware) prevents the past in standby mode: if I disable the driver, I can put my device in mode 'sleep' without any problem.

  Mobile broadband driver:

  Dell 5570e Wireless HSPA + (42mbps network) Mobile Broadband Card #4
  Date: July 9, 2014
  Version: 14.7.1050.64

  2. to wake up to the top of the device to sleep mode does not work if you do this after the first 10 seconds in mode 'sleep'.

  When I disable WiFi driver in Device Manager, clock works well, even a few hours after the mode 'sleep' was launched.

  WiFi pilot:

  Dell 1538 wireless 802.11 a/g/n adapter.
  Date: July 4, 2014
  Version: 3.7.2.59655

  I don't know if these questions are based on the hardware or driver/software based.

  Everyone knows about similar problems?

  Kind regards

  Dominik

  Hello, I had the same problem and I tried all drivers update possible solution (reformatting my Tablet 6 times), the update of windows files, etc... Nothing helps. In the end, I found a similar problem for a Dell location 11 Pro user who suggests to turn off the TPM and Bitlocker. As soon as I disabled it Win8 table bitlocker and TPM/Bitlocker from the Bios (Secure boot - disabled), the Tablet began to wake from sleep with no problems... it's been 1 week now and it has not failed once (it allows to get a black 3 - 4 times per day before the change of the screen).

• Windows 8 Pro will sleep after 60 seconds of inactivity

  I just upgraded via a clean install of Windows 8 Pro. Now, the computer to standby / sleep after 60 seconds of inactivity. Interestingly, this problem occurs only once the machine has already gone to sleep once in this feeding cycle. In other words, if I start from a cold, start the machine will follow the diet plan appropriate (screensaver after 10 minutes, sleep after 2 hours) until what he went to sleep once, after which it will go to sleep every 60 seconds of inactivity.

  The system event log indicates "42 Kernel Power event: the system between sleep.". Reason to sleep: System Idle. "But it does after one minute of inactivity.

  I have reset all electrical energy plans, I created my own power management. Hybrid sleep is turned off. I have run the checker (sfc/scannow) system files and I've searched the forums largely unanswered.

  It is a customized desktop machine never had this problem on Windows 7, this is a new behavior for windows 8.

  So, after a lot of digging and try a lot of things, the solution below worked for me. But if someone can verify it worked for them, that would be great:

  It seems that maybe Windows to view the return of sleep as a remote activation which apparently expires to slow more quickly than the other wake ups. To change this feature, delete the following registry key: (perhaps using the power button to go back to sleep as suggested would be a work-around?)
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\238C9FA8-0AAD-41ED-83F4-97BE242C8F20\7bc4a2f9-d8fc-4469-B07B-33eb785aaca0\DefaultPowerSchemeValues
  To do this, Win Key + R (displays the run menu), and then type "regedit.exe" and navigate to the location of the key above. For more security, you need to save (export) this key before you delete it.
  Alternatively, you can change each of the secondary keys instead of remove them. Each corresponds to one of the power management. If you choose ACSettings you choose a behavior for when the machine is connected, the DCSettings are for the battery power. If you change the key switch 'decimal' value is in seconds and can be changed to any value you choose.
  Please see this post for more information: http://social.technet.microsoft.com/Forums/da-DK/w7itprogeneral/thread/6909b30f-f71d-4dc6-9c42-12db1d38944f