HP Stream 11: Disabling the HP 11 flow system

Similar Questions

• Disable the creation of Automatic System Restore Point? -SOLVED

  Is it possible to disable the automatic creation of System Restore Point (to prevent Windows to create points of food every day and after (re) install programs / Windows updates)?

  I want to manually create System Restore Points because the automatic creation uses too much space, because I install new programs very often.
  Note that I still want to use system restore. I don't want it to be automatic.

  Hello

  Well, Yes, you can shut down the computer to automatically create restore points by disabling the system of protection under the system restore. System protection is a function that creates and records information about your computer's system files and settings regularly. The system protection also saves previous versions of files that you have modified. It saves these files in the restore points that are created just before significant system events, such as the installation of a program or device driver. They are also created automatically once every seven days if no other restore points were created in the last seven days, but you can create restore points manually at any time.

  Again, I suggest you to create a restore point when you turn off system protection. Basically, to store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection. System Restore can use up to 15 percent of the space on each disk. As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new. The system protection, the feature that creates restore points, is enabled by default. We recommend that you keep System Protection turned on for all hard disks that contain important files so that you can use system restore if you need to.

  Check out the link to disable restore points:

  http://Windows.Microsoft.com/en-in/Windows7/turn-System-Restore-on-or-off

  For more information, you can take a look at this article as well:

  http://Windows.Microsoft.com/en-in/Windows7/system-restore-frequently-asked-questions

  Do not hesitate to ask if you have more queries on Windows.

• How to disable the touchpad on Windows 8

  How can I disable touchpad win 8?

  How can I disable touchpad win 8?

  Hello

  It depends on the number of brand and model of your computer.

  The following keyboard shortcuts have been known to disable the touchpad on different systems. Press and hold down the Fn key and then press F3, F4, F6, F7, F9 or F12 to disable the Touchpad.

  Specific instructions, read the instructions for your system or contact the support of laptop manufacturers.

  Concerning

• Is it possible to stop sending new Photos to the my new Album Photo Stream without disabling my photo stream

  Whenever I open my Macbook Pro, it starts to keep download all my new Photos imported even are repeated in the photography workflow, Raw files, I won't upload the photo stream, I just download new Photos and never import them to the photo stream.

  Photos for Mac 1.3

  OS X El Capitan 10.11.3

  MacBook Pro 13 inch, late 2011

  2.8 GHz Intel Core i7 processor

  16 GB 1333 MHz DDR3 memory

  Intel HD Graphics 3000 512 MB graphics

  It is not possible on Photos for Mac that allows you to disable the download in my Photo stream selectively, if you want to use my photo stream to download from your mobile devices.

  The only way to stop the download for my photo stream is to disable my stream of photos completely, if you want to download and import new photos using a USB connection.

• HP Stream: Disable the Code 59010962

  I am at a loss with this Code to disable the HP flow. For normal BIOS, no problem. I would normally reboot USB or disk, but not with the flow. I have a Disable Code 59010962. If anyone can help with this?

  In addition, I noticed a lot of comments on this with Solutions solved. Fantastic. My question is "how to make a copy of the Codes reference so I can do the same thing?  The reason I ask this is that I have clean the computers to a local Pawn Shop. Normally, I would use a USB key or recovery for Windows 10 methods, but this confusing me.

  Thanks in advance for any help.

  Respectfully,.

  John

  Analyst.

  This can help for the future.

  http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-BIOS.html

  "HP ProBooks and EliteBook." It is for those who do not need to be shotgunned.

  Download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  It is for those who must be shotgunned.

  Download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Given that your model is not listed, select "SHOTGUN".

  After the reboot, repeat 'SHOTGUN' a second time.

  I would like to know the result, so I can update my list.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  Additional help here.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

  REO

  

• Z10 blackBerry a way to disable the bluetooth handset and use activate streaming audio only?

  I use bluetooth in my car to make or receive phone calls and it only allows you to stream Pandora.  On my previous BBs, I was able to disable the handset function and just use streaming, but I'm not find similar options on the Z10.  Does anyone know how to do this? Right now I just turn off my stereo when I receive a call, but this isn't a good solution.  Thanks for any comments.

  Hello oumiahamada and welcome to the community of BlackBerry Support Forums.

  Thank you for your question about Bluetooth.

  The Z10 BlackBerry doesn't have the option to edit what services are allowed with a Bluetooth connection.

  Depending on your vehicle, you will need to access your Bluetooth set up or the settings in the dashboard of your car to control what features are Bluetooth-enabled.

  If you don't know how to access these settings, contact your dealer or see your owner's manual.

  See you soon!

• G60: Turn on the password, system to disable the code: 57770150. Attempt to restore. Have the disks.

  It is an old laptop that I bought new week Windows 7 is out, but it is preloaded with Vista.  I got a product key for Windows 7 update but no real drive and did not recovery disc at the beginning.

  2011. I had issues and called for what I thought was supported from Microsoft Tech (a number provided by Office Depot employee) and paid for support and allowed them access remotely.

  Disreputable company or a person got deep into my system, networking, tried to steal files and installing keylogging and silent channel Skype file bombs and who knows what.  I got the files, file-by-file and moved to external drives, tried many times have this machine wiped and restored.  I have never trusted and ended upward abandonment and to buy a macbook air.  So my HP laptop is currently loaded with Microsoft 7 ultimate with a legitimate key from a school who worked on this subject, but I do not know if the restore was successful since it was never taken away from the factory with Vista settings, first.  I just gave up and set it aside.

  On the fast track. A few months ago I decided that I wanted to use this machine again because it has a bigger screen for photo editing and may contain pictures, freeing up space on my macbook air flowing.  However, even with my tip, I could not remember my old password journal.  I finally found a way to bypass my password login, but in the process of game one power new password.  I didn't try anything fancy and can not remember how or why I did it, even.  I was sure it was just my name or a generic name like "admin" or "password"... so I was happy I got, but still had reservations so I did some updates and ordered the Vista restore disks and set it aside again.

  Argh.  So now I was ready to move some files from my mac and was almost convinced myself just to use the disks of Vista to default and I DON'T remember the power on password... (I am sure that I would have written this down in the notes on my iphone... but unfortunately, I dropped on concrete a week or two ago and cannot access my notes!)

  After a few attempts, I get code: disable the system - 57770150.

  It's a bit like Moby * beep * now.  I have no cash or motivation to buy another laptop.  I really want to get THIS phone, which was basically stolen from me to solve some problems at the moment (free space on my mac).

  A I completely screw this up after all this?  I've read about taking batteries or pins... never tried it before, but I'm not afraid to take risks because I've already lost everything I could lose on that.

  Is there a way to restore discs if I can't power up password screen?

  Any help would be greatly appreciated.  I realize account this message is long, but it's a complicated scenario and I thought that the history of malware, remote access, set at level vista/windows, may be of interest...

  Thank you!

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• How to disable the Date/time and the side Pop out window of Windows 8.1

  When I move my cursor/arrow on my touchpad on my laptop 11 flow through the office, or sometimes on a web page, for example, the date and time pop - up down to left and the research / action / start / devices / Setup window appears on the right side of the screen. It makes me crazy. How can I disable this feature of the software?  If I need them, I can simple enter the windows on the bottom of the screen icon. In its current form, it is playing all the time and I want to turn it off. Thank you.

  HP PC laptop flow 11 model: 11-d010nr, product number: K2L95UA #ABA, file system NTFS, Intel Celeron CPU N2840 2.16 GHz, RAM 2.00 GB, 64-bit x 64 based processor, 8.1 with Bing Windows operating system, HP USB 3.0 flash drive 128 GB, Sandisk Ultra SDHC 32 GB FAT 32 memory card

  Hello @BubuBaby,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Notebook PC 11 workflow and settings of Touchpad not working not properly. You can disable the popup of charms by right-clicking on the desktop go to properties. In the properties of Navigation window and the taskbar, click the Navigation tab and uncheck the box - when I point to the upper right corner, show the charms.

  Here is a document on how to troubleshoot the Touchpad, if you need it.
  
  If you proceed to the section setting of TouchPad pointing the sensitivities it should help solve the problem. Enable or disable individual gestures by clicking the check box next to each item. A check mark in the check box indicates that the gesture is turned on.
  
  Hope this fixes the Touchpad settings.
  
  Thank you.

• Strategy group by using server 2003 standard edition; I want to disable the software / hardware installation

  Original title: I have a question related to group policy

  I have a question related to group policy

  We are using server 2003 standard edition and I want to disable the software / hardware installation

  users cannot use usb ports, CD/DVD

  Download, streaming audio, video, chat games continuous access app

  How can I disable these things using GPO Windows Server 2003 Standard Edition

  Hello

  Welcome to the Microsoft Windows answers Forum!

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Disabling the data rates inherited b

  Looking for advice on how to properly disable the low flow rates in our environment of 2.4 GHz.  We would like to disable all data rates b and support only 12 Mbps and more.  I understand I must set my rate of data WLC as well:

  1 Mbps through 11 Mbps - disabled

  12 Mbps - mandatory

  18 Mbit/s through 54 Mbps - supported

  Is this the right way to support customers g and effectively exclude customers b and all associated General fresh b?  I look forward to any comments!

  Thank you

  Anthony

  Yes, who's going to do well.

  HTH,
  Steve

  ------------------------------------------------------------------------------------------------
  Please don't forget to rate helpful messages and mark the questions answers

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• How to disable the UDP inspection

  Hello, I do a test for our new ASA prior to deployment. We use VeEX tester to generate the traffic of 10G. Unfortunately, this Tester is not taken in charge of traffic of layer 4 for 10G, all header UDP, etc. are part of DATA and only can fill in the template of 16 bytes (repeat a pattern fill). This causes the ASA to reject the packet with invalid length udp or invalid UDP port etc.. Is any cmd CLI can we use to disable the UDP checking and passing traffic couche3 directly? We would like to get the flow of basic performance data.

  Thanks in advance.

  Hi Gongyuan Yao,

  Maybe, you need to move your question to the Community ' security > firewall "since you ask for help on the configuration of the SAA.

  Best regards

  Roger

• How to disable the DLNA Server?

  Hello

  How can I completely disable the DLNA server in Windows 8? I see how I can do my inaccessible PC with DLNA (i.e. "block all" in streaming media settings), but who doesn't look like he completely turns off the server, or is it?

  I could not find any service named as a UPnP or DLNA server either.

  Thanks in advance!

  You can * probably * accomplish this by turning off the network WMP Service - why
  are you looking for this?
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• Get error 'Failed to verify internal {no context}' when using the suite of flow

  Hey guys, I'm trying to get some layer flow using stream suite, but I get the error 'Failed to verify internal {no context}' on After Effects cc 2015. but the same code works fine on After Effects cs6. Here is my code,

  Value AEGP_TwoDVal;

  A_Err err = A_Err_NONE;

  Flow AEGP_StreamRefH = NULL;

  ERR (_suites-> StreamSuite4()-> AEGP_GetNewLayerStream (_plugin_id, layer, AEGP_LayerStream_ANCHORPOINT, & stream));

  Val AEGP_StreamValue2;

  AEGP_StreamValue2 * sample_val = & val;

  AEFX_CLR_STRUCT (Val);

  ERR (_suites-> StreamSuite4()-> AEGP_GetNewStreamValue (_plugin_id, flow, time_mode, time, ignore_expression, val)); 'failed to verify internal {no context}' on this line

  val.val.two_d.x = value.x;

  val.val.two_d.y = value.y;

  ERR (_suites-> StreamSuite4()-> AEGP_DisposeStreamValue (& val));

  ERR (_suites-> StreamSuite4()-> AEGP_DisposeStream (stream));

  And the error code is "A_Err_PARAMETER".

  But the code works fine on CS6. Did you guys ever faced this problem?

  Yes, I think that the problem of thread is the case. I move the whole EI to the idle hook, and now things work correctly!

• The time varying flow value

  Hello

  I started to create a CEAP plugin to generate the example queries.

  Using only key frames is not enough, that I should be able to set the value of a stream of variable time for each image. For example, if I create a path with the pen and copy only the keyframes, the path between the keyframes will not be the same.

  I saw that there is an AEGP_SetLayerStreamValue (...) but not for varying time streams.

  Can get the value of flow to each frame with AEGP_GetNewLayerStreamValue (...), I don't see how I could put it. Is it possible to do?

  Thank you!

  Nope. expressions are the only way to do it.

  any other way to change the param value will cause it to create a

  keyframe. (if this setting is already editing)

  on AE13.5 and the situation is even more strict and only the user interface

  thread could change the param values. change between the rendering thread has never been

  good idea, but you could get away with it in the past...

  (just tied up loose ends on this thread for future generations)