The time varying flow value

Similar Questions

• Take the time between two values

  Hi people,

  I have a problem and I know idea how to solve... I need help.

  The problem is I want to take the time between two values max as you can see in the chart.

  For example, in the image that I have add

  4.5 - 1 840 = 2.66

  And enter this value in the 'time between mostra '.

  It's that I want...

  But what I think is very complicated, because I don't know how to take the time correctly and does remove...

  Thank you very much

  Any solution?

  Hi jocuma,

  I tried something and hope that helps u.

  Just create two arrays of temperature and voltage. First of all, I'll get the value of the voltage when it is more of a certain value and that same index to get the value of time and store in the shift register.

  When I get the second higher than the limit value, I'll get time and subtract the previous value.

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• Take the last value of the timer

  Hello

  Looking for a help store the timer values.

  Set the backround: will be used to gather data for tests on mechanical switch lifecycle sump pumps.

  Needs to: number of cycles (lit-shut down-lit), Count time stuck we or off (authorized in time is the estimated time to fill/drain sump), see the amount of time stuck on or off.

  I got all of these features to work, but my problem is that when I save to spreadsheet each incriment stuck time power is saved. This could lead to a large number of unnecessary data points. Instead, I want only the last zero no value of the glued power saved timer.

  Any help is greatly appreciated.

  ~ Andrew

  Here ya go:

• use the time stamp value find value Y in another waveform

  Hello, there, I'm using labview 2013 sp1. I'm sorry that I can't use a picture to describe the problem.

  The wizard sampling DAQ 2 waveforms of 2 channels to HAVE

  Want to use mounted on board one of the waveforms as the triger to get the value of Y to another waveform (as was done with an oscilloscope)

  I tried method 2:

  1. the useto separate a waveform to and use to get the time of adjustments

  2. always use

  and use to get the timestamp.

  are - this method works?

  the problem is how can I use the value of time I've learned very well the value of Y in other waveforms?

  Thank you much in advance.

  I'm sorry you use screw Express, and I'm even more sorry that you are using the dynamic data type.  Using these are not your fault, it's that NEITHER recommend for new developers, but you tend to not have as much control then you type using more stringent data and write the code yourself.

  Using Split signals you can withdraw all of your signals since the type of dynamics and process data of each.  Don't know why you would use signals select but which, in my opinion, they do the same thing.  Then, you use DDT to to get your data into a format that is more useful.  Select the Conversion of a single waveform.  The explanation I gave in my previous post is valid.

  Joined a VI that does what you want.  You can see that once you have a waveform and its components, you can do a much better job.  Like finding the Min and Max of a wave by using table functions.  It searches the first place where AI0 went above your trigger and then gets the value that AI1 was at this same level, which will be at roughly the same time.  Don't forget not that served it one after the other, so no two samples will be taken at the same exact time for most of the DAQ cards.  Few are simultaneous sampling.

• final value of the timer

  Hello

  I have a few problems to store the timer values and appreciate all the help I can get.

  Set the backround: to collect interval data (time, count) between packets on an assembly.

  Needs of: count the number of packets and view the time between packets.

  My problem is that when I save to spreadsheet each incriment stuck time power is saved. This could lead to a large number of unnecessary data points. Instead, I want only the last zero no value of the glued power saved timer.

  Any help is greatly appreciated.

  ~ Modi

  
  

• Returns the time value zero calendar

  Hi, I write code with calendar that return the value zero for HOUR_OF_DAY and MINUTE when I run this code in Strom2(9550-5.0.0.334) below.

  Calendar calendar = Calendar.GetInstance ();
  Date date = new Date (this.arrivalTimeField.getDate ());
  calendar.setTime (date);
  Day int = calendar.get (Calendar.HOUR_OF_DAY);
  int minute = calendar.get (Calendar.MINUTE);

  So please help me for this problem and thanks in advanced

  I had a lot of problems like myself.  Invariably, I find that the bug is my code.  Usually, it is not difficult to find using the appropriate debug or SimpleDateFormat (because times are difficult to interpret, it is good to let the system do it for you!).  I suggest you do the same thing here.

  If you find that the system does not have it that you wait, then give us the details, for example, give us the long value that you provide to the calendar and the time you go out. You should be able to do it in two or three lines, just using the standard Java RIM (i.e. None of your classes).  You can also indicate the time zone that you are testing in.

• Time zone stored values and change the time zone database

  When I change time zone database, the values of 'timestamp with time zone' of column stored automatically will change, or they will keep the time zone, they have been stored in form.

  TIMESTAMPWITHTIME ZONE includes these fields:

  • TIMEZONE_HOUR
  • TIMEZONE_MINUTE
  • TIMEZONE_REGION
  • TIMEZONE_ABBR

  Therefore, Therefore, Therefore, Therefore, TIMESTAMP WITH TIME ZONE is database timezone independent. It is TIMESTAMP WITH LOCAL TIME ZONE that is database timezone dependent, therefore database timezone can't be changed if it has any TIMESTAMP WITH LOCAL TIME ZONE columns which contain data.

  SY.

• How to slow down the sound from a video clip to the exact time (keyframes) and values?

  How to slow down the sound from a video clip to the exact time (keyframes) and values?

  I used the timewarp, but the sound is not affected.

  It is to be expected. Only the native time remapping affects sound, but given that EI is not an audio processing application, the quality is terrible. You must use the hearing or a similar program.

  Mylenium

• Any graphical plugin, or other available solution of "CAPTURE a VALUE at THE TIME TO click ON?

  Hello

  I just realized that the query is not my problem.

  I have a graph that uses the query below, and it displays bars showing the 4 different totals revenue market Segment in every bar.

  My requirement is to drill down in this section of the graph and show what amounts to this total.

  I can't add this to the LINK because at the time of the request, the market Segment is unknown.

  Y at - it a graphic plugin, or other available solution that can of "CAPTURE a VALUE at THE TIME CLICK ON"?

  Select the NULL LINK,

  TO_CHAR (to_date (Year, 'YY'), 'YYYY') year.

  sum (decode (market_segment, Advanced Technology Facilities, recipes, 0)) 'Advanced Technology',

  sum (decode (Market_segment, "energy and environmental Technologies", recipes, 0)) 'energy and environment '.

  sum (decode ("market_segment, ' High Tech infrastructure", recipes, 0)) 'high technology Infrastructure. "

  sum (decode (market_segment, "Chemical and Life Sciences", recipes, 0)) 'Life Sciences and chemicals. "

  of apps.xxmwz_apex_rev_5yrs

  Group by year

  order by 1

  I think you just need to change your group clause

  of ' group by year, market_segment.

  for "group by to_char (to_date(year,'YY'), 'YYYY') , market_segment '.

  This is the request of my sample application

  select 'f?p=&APP_ID.:2:'||:app_session||'::::P2_MONTH,P2_STATE:'||trunc(DEMO_ORDERS.ORDER_TIMESTAMP,'MM') ||','||DEMO_CUSTOMERS.CUST_STATE||':' link,
         trunc(DEMO_ORDERS.ORDER_TIMESTAMP,'MM') year,
         case when DEMO_CUSTOMERS.CUST_STATE = 'VA' then sum( DEMO_ORDERS.ORDER_TOTAL) end as VA,
         case when DEMO_CUSTOMERS.CUST_STATE = 'MA' then sum( DEMO_ORDERS.ORDER_TOTAL) end as MA,
         case when DEMO_CUSTOMERS.CUST_STATE = 'GA' then sum( DEMO_ORDERS.ORDER_TOTAL) end as GA,
         case when DEMO_CUSTOMERS.CUST_STATE = 'IL' then sum( DEMO_ORDERS.ORDER_TOTAL) end as IL,
         case when DEMO_CUSTOMERS.CUST_STATE = 'NY' then sum( DEMO_ORDERS.ORDER_TOTAL) end as NY,
         case when DEMO_CUSTOMERS.CUST_STATE = 'MO' then sum( DEMO_ORDERS.ORDER_TOTAL) end as MO,
         case when DEMO_CUSTOMERS.CUST_STATE = 'CT' then sum( DEMO_ORDERS.ORDER_TOTAL) end as CT    
  
  from DEMO_ORDERS DEMO_ORDERS,
      DEMO_CUSTOMERS DEMO_CUSTOMERS
  where DEMO_ORDERS.CUSTOMER_ID=DEMO_CUSTOMERS.CUSTOMER_ID
  group by
  DEMO_CUSTOMERS.CUST_STATE,
  trunc(DEMO_ORDERS.ORDER_TIMESTAMP,'MM')
  

• Time value of the time indicator?

  Is there a property that allows a script read the time value of the current-time indicator?  If so, how?

  Thank you!

  I think it would be fair to the attribute of an hour :

  Alert (App.Project.activeItem.Time);

  Dan

• BPEL variable, take the time to 1 min just for the assignment of value in the Assign activity

  Hi all
  
  We get a strange question in BPEL production environment.
  In the assign activity, there are 3 variable hardcoded with some default values.
  At runtime, a variable is to take more time from 1 minute to initialize just this default value.
  We do not get this problem of time in Dev and Test environments, so we are not able to test this.
  Please look in the Audit trail for the BPEL instance in the Production environment.
  Request to let me know if them work around or fix for this issue.
  
  
  
  Thanks in advance,
  Kumar

  Hello

  Yes, you can get to know the time for the verification that frm trail... u can also make use of activity sensors to calculate the exact time.

• sum of column that contains the values in the time format

  Hi all
  
  I give you a piece of my code below

  SELECT  dif.EMPLOYEE_NUMBER Employee#, dif.FULL_name EmployeeName,
   TO_CHAR(START_DATE,'dd-Mon-rrrr') DOJ ,dif.DEPT_NAME,POSITION , DATE_ENTRAY AttendanceDate,
  
   to_char(DATE_ENTRAY,'DY') day, TO_CHAR(LNE1,'hh24:mi')TimeIn1 ,TO_CHAR(LNE2,'hh24:mi')TimeOut1,
   
   TO_CHAR(LNE3,'hh24:mi')TimeIn2 ,TO_CHAR(LNE4,'hh24:mi')TimeOut2, TO_CHAR(LNE5,'hh24:mi')TimeIn3 ,
  
   TO_CHAR(LNE6,'hh24:mi')TimeOut3, to_char(decode(LNE8,null ,
  
   decode(LNE7,null, decode(LNE6,null, decode(LNE5,null, decode(LNE4,null, decode(LNE3,null,
  
   decode(LNE2,null,LNE2 ,LNE2 ),LNE3 ),LNE4 ),LNE5 ),LNE6 ),LNE7 ),LNE8 ),'hh24:mi')TimeOuts ,
   
   ACT_HOUR Work_Hrs, 
  
  decode(DLY_ABSENT_TYPE,'Late',DED_ABS ,'Late (Deduction)',DED_ABS,'00:00') Late_Hrs,ACT_OVT Over_Time
   FROM jjj_PUNCH_DATA_EMP_LIST trn , 
   jjj_emp_def dif,jjj_PUNCH_CARD_ELEG ele WHERE trn.EMPLOYEE_NUMBER =dif.EMPLOYEE_NUMBER and   
   ele.EMPLOYEE_NUMBER =trn.EMPLOYEE_NUMBER  and   DATE_ENTRAY between '23-Aug-2009' and  '24-Aug-2009' 
  
  I require to find the sum of column  wrk_hrs
  Act_hour or wrk_hrs belongs to table  jjj_PUNCH_DATA_EMP_LIST trn , and the datatype of act_hour is varchar(10 byte)
  the values of column act_hrs, (i require the sum of this column)
  08:00
  07:22
  06:08

  kindly help
  thanking in advance
  
  concerning
  Oracle user

  Hello

  Thanks for posting the CREATE TABLE and INSERT. That really helps.

  Do you want 19:33 ' as the output? Which makes it look like 19 hours and 33 minutes. Most people would represent 19.33 hours (i.e. 19 more than 1/3 hours) as 19:20 '. Should not the sum of
  ' x: 00 ' and
  'y: 20' be
  "z: 20?

  If you really want 19:33 ', see the solution of Hoek.

  If you really want 19:20 ', then you were on the right track.
  I think that you were trying to do:

  WITH  got_total_hours     AS
  (
       SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                  + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                    / 60
                    )
                  ) AS total_hours
       from      p
  )
  SELECT        TO_CHAR (FLOOR (total_hours))
         || ':'
         || TO_CHAR ( MOD (total_hours, 1) * 60
                 , 'fm00'
                 )     AS hh_mm
  FROM     got_total_hours
  ;
  

  Looks like you were trying calculate total_hours in a subquery, then use the total_hour alias in a query Super, which is quite accurate. You're just confused on how to write a subquery.
  There are two basic ways to write subqueries:
  

  (1) WITH clause:

  WITH  sub_query  AS
  (
       SELECT  ...
  )
  SELECT  ...
  FROM      sub_query
  ;
  

  (2) online review

  SELECT     ...
  FROM     (     -- Begin sub_query
       SELECT     ...
       )     -- End sub-query
  ;
  

  Looks like you tried a bit of each method.

  In most cases (this included problem) either one will work.
  Other problems are much easier by using a WITH clause and WITH clauses are usually easier to read and understand, I recommend that you always use a WITH clause rather than views online.

  You can also change the Hoek solution to get the result 19:20 ' without a subquery (or without using any expression complicated, more than once, which is the only reason why I have proposed a subquery). Since date arithmetic Oracle comes from the days, not hours, when the solution of Hoek has calculated the number of hours, you'll have to divide by 24 to get the number of days. If you are using TO_CHAR to fit the time, however, the results can be confusing if the total is 24 hours or more. You might be better off using NUMTODSINTERVAL.

• Restrict the time value in the calendar

  Hello..
  
  How to display the calendar without time value
  
  When I select the date in the calendar he displayed without time, but when I hit the go button the time value is added to the prompt values.
  
  How to get there?

  What version of OBIEE do you use?

  The procedure is all is set correctly to get the date (without timestamp) in the dashboard caledar prompt. I explained procedure several times, then maybe you can read:

  http://108obiee.blogspot.com/search/label/date

  There are a few posts on this problem and you will find your solution there, it is very useful and you will notice that I have not timestamp in the prompt calendar inside my examples. Step by step.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Date value with the time to midnight

  Hi all
  I have a requirement where I have to insert the date in a DATE data type column. The requirement must have the value of time too. I have to insert dates with TIME as 000000hrs or 12:00. But I am unable to do so. Whenever I try, he inserts just the date. But if I try to 12:00:01 AM, it inserts. Anyone know why this is happening? Or how can I insert the desired values?
  
  PS: the table already contains data, and they have the time above mentioned format.
  
  Thank you
  Lucette

  It is purely a display issue, as others have said.

  When a date is stored in a DATE data type, there's always a component "hour".
  This is the front end of the GUI (like the TOAD) who can sometimes simply display the part of date if the time is 00:00:00.
  for example if we look into SQL * Plus, we can tell him how we want the date and time displayed...

  SQL> drop table x;
  
  Table dropped.
  
  SQL> create table x(d date);
  
  Table created.
  
  SQL> insert into x values (trunc(sysdate));
  
  1 row created.
  
  SQL> insert into x values (sysdate);
  
  1 row created.
  
  SQL> insert into x values (to_date('20/04/2009 00:00:00','DD/MM/YYYY HH24:MI:SS'));
  
  1 row created.
  
  SQL> select * from x;
  
  D
  ---------
  21-APR-09
  21-APR-09
  20-APR-09
  
  SQL> alter session set nls_date_format = 'DD-MM-YYYY HH24:MI:SS';
  
  Session altered.
  
  SQL> select * from x;
  
  D
  -------------------
  21-04-2009 00:00:00
  21-04-2009 10:19:18
  20-04-2009 00:00:00
  
  SQL> select d, dump(d) from x;
  
  D                   DUMP(D)
  ------------------- ----------------------------------------
  21-04-2009 00:00:00 Typ=12 Len=7: 120,109,4,21,1,1,1
  21-04-2009 10:19:18 Typ=12 Len=7: 120,109,4,21,11,20,19
  20-04-2009 00:00:00 Typ=12 Len=7: 120,109,4,20,1,1,1
  
  SQL>
  

  Here, you can see that if we inserted a trunc would date or explicitly a time of 00:00:00 with our date, then that time was properly stored on the database.

  Certainly a user interface issue. ;)