HP Stream Notebook 11th session of the Committee: cursor jumping around

Where and when I start typing, the cursor will jump to another line, page, word, etc. Even when I hold my hands above the keyboard way and hit a key at a time. What continues?

Under the control panel = > mouse there is a parameter to hide the pointer while typing , you could try to change.  If this does not work you can reinstall all the drivers of Intel chipset and touchpad on the hp.com site.

Tags: Notebooks

Similar Questions

  • HP Stream Notebook 11th session of the Committee: 10 windows

    I signed up for the new windows 10 updated but just found out that if I do not download it I'm not always able to do a factory reset if necessary, comments on this you I do a factory reset at any time?

    A lot of sanae

    You should always be able to do a factory reset. You have the possibility to do from a desktop Windows 10 or using your recovery media.

    Click on the magnifying glass icon and enter the HP Recovery Manager, and then click on the item of office of HP Recovery Manager. Who should call the Recovery Manager.

    I have improved my current loan of the product HP 15 Omen and the Recovery Manager is still present. Know that it will recover your laptop to the original operating system, and not to Windows 10.

  • HP Stream Notebook 11th session of the Committee: there is a man's voice on constantly. How can I disable him

    A man's voice is constantly.  How do I turn it off.

    Don,

    If it is the Narrator, you are having problems with,.
    Bar open from charms
    go settings-> change settings pc-> in settings go to ease of access
    go to the narrator and turn it off

    OR

    Open the Panel-> Accessibility-> Ease of Access Center-> Explore all parameters of-> use the computer without a display.

    Clear the checkbox by turn the narrator and click Save.

    Concerning

    Visruth

  • HP laptop, Stream 11th session of the Committee: is my portable internet compatiable

    Hi, just bought a HP laptop, Stream 11th session of the Committee. 11d015na with intel Celeron processor N2840 (2.16 Ghz), 32 Gb MEM, 2048 MB DDR3 SDRAM, 8.1, 29.5 cm diagonal HD LED display Windows, with WLAN & bluetooth...

    I have 2 questions...

    Is the MEM 32 GB hard drive size? small enough sizes todays...

    Can I connect to my home Wi - Fi network to go on the internet, as after I bought this laptop, I noticed there is no mention of a Wi - Fi connection

    Any help in these important issues would be appreciated, especially an internet wireless connection.

    Thanks in advance

    Hello

    The following link shows its specifications:

    http://support.HP.com/au-en/document/c04719506

    1. Yes, it's the size of the hard drive. Normally you do not keep the programs and files in a flow machine,.

    2. Yes, it has WiFi and Bluetooths as mentioned above.

    Kind regards.

  • Computer laptop 11th session of the Committee: WiFi won't connect

    I bought nine in January WiFi worked in Australia, the United Kingdom and China, where I work. Last month, I visited Hong Kong and used a system of hotel WiFi. Back in my city, WiFi at all initially reported as limited connection and would not have Internet access. I tried my home computer from a friend, with the same error, although his computer had no problem connecting. I tried to uncheck the box saying computer could cut in certain circumstances, i.e. I keep control. Now there is no Internet at all. The name of my WiFi system is visible, and the words "No Internet access. No WiFi is visible when I try to add WiFi. I have another computer that works perfectly on WiFi I have available. If I needed to re - install, how can I download the program and transfer to the ch?

    @dawei,

    Hi again and thanks again for posting.  Here is a link to Microsoft to treat problems of WIFI.

    Wireless and wired network problems

    If you still have questions, then you will need to contact the HP support by phone for repair options.

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Thanks again for posting and have a great day.

  • When you type, the cursor jumps around. How can I correct this situation?

    When you type, the cursor jumps around.  How can I correct this situation?

    It is a very common problem when users become familiar with a new laptop. Either your palm/wrist/cuff/bracelet is touching the touchpad as you type or the touch pad sensitivity is set too high and reacts to strong strikes.
    • Someone to watch you while you type to see if you accidentally touch touchpad of the notebook.
    • Go to the control panel mouse configuration and reduce the sensitivity of the touchpad.
    • Make sure you use the latest version of the driver from the manufacturer of the laptop for the touchpad and update if a new becomes available.
    • Disable the touchpad entirely in favor of a wireless laptop mouse.
    As noted previously, this is a very common problem and users are usually completely unaware they do even when it is pointed out to them.
  • NB200 - cursor jumps around the screen while typing

    Hello

    When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

    So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

    Any help or ideas greatly appreciated!
    Thesis writing will be more months if the problem persists! :)

    John

    Here is the solution I've used and displayed a few threads down...

    Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

    You will suffer is not since the Cursur jump you met more...

    HTH,

    The f

  • I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type.


    • I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type. He
    How can I fix t?
    Thanks for a much improved product.

    This thread is perhaps relevant: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3b935c1e-9c66-4236-93e8-b3356bfbb7c7 TaurArian [MVP] 2005-2010-implementation to date of Services

  • I have problems with the cursor jumping around when I type, especially on facebook.

    When I type, the cursor jumps around. Most of the time he'll be back in the part I typed before. And for some reason, he does it almost everytime I type in the word you. I have run virus scans and she always does. Any suggestions?

    By chance, your computer is a laptop or netbook?
    I found that when typing, my wrist is sometimes contact with the touchpad causing the cursor to jump on.  Something specific on how you type 'you' might make your wrist touch the touchpad.  If this is your case, there is a program called 'touchfreeze' which disables the touchpad while you type.

    TouchFreeze: <> http://code.google.com/p/touchfreeze/ >
    Article: <> http://www.pcworld.com/downloads/file/fid, 83501/description.html >

    HTH,
    JW

  • I need a simple solution to the cursor jumping around.

    I need ' a simple fixto the cursor jumping around.   I tried a system restore, but it does not work.   I'm not a programmer, so it must be simple, please help.    I'm about to throw this Windows OS Dell computer out the window.   Laughing out loud

    Hello

    1 does happen on all applications?
    2. you are using a desktop computer or a laptop?

    Method 1.
    If you use a laptop try disable the touchpad and check.

    Method 2.
    Step A.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

    See the article below for the procedure safe mode in Windows XP

    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    Step B.
    You need to perform a clean boot to find the program that is causing and then disable or remove.

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us

    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • Why my cursor jump around the page when I type

    When I type on Word or an e-mail my cursor jumps around the Aalst page all the time. This could be the cause?

    Hi Phil,

    1. what kind of mouse do you use? Wired or wireless?
    2. is it a laptop or desktop?
    3 when was the last time it was working fine?

    I suggest that you check if the mouse settings are correct.

    You can read the following article and check.

    Change the settings of the mouse

    Method 2:

    Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  • I can barely type a sentence in email or office without the cursor jumps around. It gets worse every day! ... What happens and how can I fix it or stop?

    I can't type a paper letter or in school without the cursor jumps around. It just happened again! ... He jumps around and I have to watch very closely... he already did 3 x now, just try to type these 3 phrases! What is wrong w / my laptop? and how can I solve this problem!

    Just a guess, you could have a setting on a place where some keys move the mouse. That would be used in the case that you do not have a mouse.

    Other that I can't help you much. If you are using a desktop computer, try to unplug the mouse and see what happens. If you're on a laptop, it could be that the trackpad is having problems.

  • Vista, why my cursor jumps around on the screen without reason?

    Vista, why my cursor jumps around on the screen without reason?

    You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

    This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

    If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

    I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why my cursor jumps around places of evil or activate the link when I type

    I have a sony VAIO notebook that I hate the curzor jump around and by activating the link or not wanted to feature.

    and how do I post this question that I spent 5 minutes not able to see a link to it?

    I have a sony VAIO notebook that I hate the curzor jump around and by activating the link or not wanted to feature.

    and how do I post this question that I spent 5 minutes not able to see a link to it?

    2 possible reasons for your question...

    1. you used to type. You may not realize, you may be in contact with the touchpad while you type, therefore, the cursor moves.

    2. your touchpad is too sensitive. Each brand computer has a different way to change the settings on the touchpad. My Acer method will not apply to your brand.
    Refer to the computer user documentation.
    Basically, you need to go into the settings of device which you can see how to enable or disable the touchpad.

    First steps are universal... Start > Control Panel > Classic view > mouse...

  • Canon 70 d when in the AF AREA, why not every block on the development, they jump around. Please explain!

    When I have my Canon 70 d in the AF area, not all squares will show the little box inside, none present in red.  "They seem to jump around and often don't rest the face, I want what it * eyes."  I know how to leave a cliché, but I wonder why the AF AREA does this and how to get it to lock the focus where I want it.  Thank you!!  Such a seemingly simple thing but I did the research on it for hours with no progress!  Thank you!!

    As I understand it the AF system (using the available sensors which can be a single point, group, or all of them) tries to find the area with the best contrast to determine the distance & to lock on it. It is a specific part of the scene. If you want it to be the eye you place a focus on the eye area using the gamepad bit or point central by just selecting. The AF system has no idea what you think is the most important part of the scene. It can also not focus on several areas of the scene, it focuses on one place & DoF to get other areas appear in short.

Maybe you are looking for

  • 4M0T/1/40000003: gas exhaust-6407 fan max speed

    Hi, my Mac Mini 2012 (i7 2.3) it starts to make a noise. Ran some tests and the fan seems to run to 6500rmp. Whenever I power, the fan starts at max speed. After 10 or 15 minutes of use, the fan calms down. Any ideas how can I solve this problem? Tha

  • phone storage has been reduced for no reason

    my phone storage has reduced from 800 MB to 500 MB about, but I never installed additional apps in the time that I have downloaded the software update. I know it wasn't because of the update because it happened days later. help someone?

  • The USB boot recovery media

    Hello my restore partition does not work so I got Lenovo's USB recovery media. How to use who? I changed the order of startup in the BIOS, but it just does not take into account the USB and boots in the corrupted windows. Appreciate the pointers. Tha

  • OfficeJet 6500 has more sleep/standby type?

    Just started happening; PC on 24/7 (he runs a process during the night) After one day Current printer Btn is turned on but the control panel is off All printing is sent to the spooler/Quebec City, the only way to put the printer back is to pull on th

  • DocProc Msi Question!

    Series of HP Photosmart C5200 All In One Model Printer - C5280 When I select Menu to analyze and choose a choice of scanning, he said the component that you are trying to use is on a CD-ROM or another removable disk that is not available. I put the C