4M0T/1/40000003: gas exhaust-6407 fan max speed

Similar Questions

• Error: 4M0T/4/40000003: drive HARD-1287

  I have problems with my iMac 27 "2011 with El Capitan.

  I run the Apple Hardware Test and found this error: 4M0T/4/40000003: drive HARD-1287.

  What it means?

  Thank you, Lucas.

  This means that you have hardware problems that must be addressed. Probably your HD sensor, fan or has failed. Take the machine to your local Apple service provider authorized to repair, if you do everything in your area, please click on the link of the Service Provider Locator allowed Apple to begin to find a.

  Good luck.

• Pavilion 7000: Computer freeze once the fan CPU runs at max speed

  Product name: Pavilion 7000

  Product model: 7 p - 1090d

  Product no.: QP177AA #UUF

  Operating system: Windows 7 Home Premium 64 - bit version.

  Computer blocks once the fan CPU runs at max speed. Initially, the computer would occationally freeze after waking up from sleep mode (CPU fan would be occaionally operate at full speed & freeze the system).  Now cannot load even in windows. It freezes at the configuration of the BIOS once the fan turns at speed computer crashes if the CPU fan run at maximum speed wherever you are!

  1. I did the cleanning & lubrication & even take the battery to reset the Bios but no success too.

  (Before I can reset the Bios it will run normally.)

  2. remove all USB devices except the mouse & keyboard

  3. detach & attach Ram memory & graphic card

  I saw a ROM_Recovery shunt on the motherboard label. Must I do? or can someone help, please?

  I sent to the center of HP service after a week, the service staff telling me that he was unable to go bad because my motherboard is the American version, which I have no idea what it means (my PC was purchased locally) but to bring him back.

  I solved my problem of tried to detach the Rams (2 actuators) & install only 1 on an another RAM slot first. This works. Then installed the second RAM on an another slot also without no problems so far.

  I have an old HP Office also having the location of the faulty RAM & also had replaced graphics card but it raise a peep sound error which easier to identify.

  I agree with you more HP, hardware problem is due to RAM or video card. Thanks anyway

• Fan stuck on max speed

  Hi there I have a HP Envy 700-230ea and for some reason any, that the fan in the system seems to be stuck on max speed, I tried many options to reduce, but none seems not to work. I put it energy saving and leaves to be idle, but it continues to operate in full. I checked the bios, but it doesn't seem to be all the parameters to control the speed and have also installed speedfan, but even once is not make the least bit of difference for the first week, the computer ran very silent but now the fan is very strong even when it is not under pressure.

  Help, please

  Thanks in advance

  Hello again DavichGee,

  I'm sorry to hear that you are still having the problem. I would like that you try to reset the BIOS of your computer. You can do this by restarting the computer and tapping F10. When you enter the BIOS click on file and click on apply default and exit.

  If this does not resolve your problem, I still think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Operating at max speed CPU fan

  Greetings,

  I have a frined of mine has a problem with his pc which is the cpu fan works as max speed 3800 RPM even when cpu temp at 40 or 50 c or even less than 40 years. I used air can clean the radiator, and now I think of take out and apply new thermal paste.

  After using the PC for a long time it start freezing.

  What could cause this?

  PS. PC mobo is this

  http://www.ASUS.com/motherboards/Intel_Socket_775/P5LD2/

  Thanks in advance

  Hi, AOG,.

  Reset the bios to default values (including all the bios profiles) and delete all the utilities of the could adjust the speed of the fan.  The overclocking utility is an example that could change the fan curve.

  Use the stock Intel heatsink?

  Try a couple of different temperature, followed problems to ensure that the CPU temperature is correct. CoreTemp, PC Wizard and real Temp might be good choices.  Some temporary programs are known to be buggy.

  Check the level of the bios of the motherboard against what has been posted.

• I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

  Hello

  I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

  I use the switch/cat6 cables only the router is capable of 100 Mbps.

  Also, I connect the pc directly with cable and still the same speed.

  Win7 will get more than that and how?

  I read the other posts on this topic, but all patches are not applicable to me.

  I used various cables and switches and PCs in order to eliminate the possibility of a defective unit.

  Can you please help?

  Thank you

  Andreas

  Hello Andreas,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  TechNet Windows Server Forum

  Hope this information helps.

• Alienware 17 R2 (early 2015) freezes when fans went to max speed

  Shortly after startup & at random subsequently, my 17 R2 crashes when the left fan runs at maximum speed for a few seconds is then immediately freezes again when the right fan runs at maximum speed for a few seconds. Anyone know what's the deal?

  4980HQ, 16GB mem, 980 M

  Thank you all for your help. All my questions have been answered. Phone info Technical Support, video test "Cannot run" is a software problem with the test itself and will be fixed with the next update for it. The PC freeze is intentional Alienware BIOS programmers to ensure operation correct fan and only happens once per boot. My heat problem is partially due to the insufficient power of the 180 Watt power brick. The laptop was trying to squeeze more power from 180W power supply he could provide. That it caused the current limit, stop the power supply when the laptop has attracted 197 watts while playing games (by my measurement with an ammeter of work). This required that I unplug the power supply from the wall outlet to restore power. I have since received a 240-watt replacement power supply. Still, the system gets very hot but not like it was before. The power of the laptop now pull it at 227 Watts during the game. The draw excessive is a serious problem and will damage the power brick, if this happens too often, it would be in my case. It could also have negative effects on the laptop itself over time due to the hunger of power system. The battery took full charge for about 20 minutes before she reached 20% of power and strangled all for giving me the time to close everything and restart. So if anyone out there knows a power problem, you must contact the technical support and replace your power brick with a brick of 240W power 180W. My system is as follows.

  Windows 8.1, CPU - 4980HQ, 16 GB of memory, nVidia 980 m, 256 GB SSD, 1 TB of HDD, USB 3.0 Blu - Ray external USB 3.0 external 2 TB HARD drive.

  PS - The ammeter is calibrated every 6 months & is correct. 01%

• Tecra S11 - fan high speed

  Hi guys,.

  I need help on a question that really puzzle me.

  After I tried to do a bios update to the last version (February, 2012), in windows 7, I got an error message stating that I didn't have permission to do the update. Since then, the fan starts to run at high speed, as soon as I start the computer, just after the display of the logo.

  Since then I updated the bios by using the procedure in back, but the problem persists. It behaves as a flight entirely large capacity server regards fan noise.

  How can I fix it and fix it?
  Thank you.

  You have a fingerprint reader software preinstalled on this laptop?
  Please check

  The old fingerprint reader software caused a few problems like intermittent hang up or freeze your machine (possible high rotation FAN), as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  This software update or uninstall the system you don t use it.

• Satellite A500-13W - fan changes speed

  Hello

  my laptop has always changes the speed of the fan from 70% to 90%.

  I recently installed the latest version of the Bios but does not solve the problem. As I write this text Toshiba PC Health Monitor indicates that the CPU temperature is 40% and the fan speed is between 80% and 90%. I put my laptop to the power saving mode, but why the fan operates at high speed?

  Is there someone who has the same problem or is this just me?

  Hey,.

  Did you check if battery optimized cooling method is defined in the parameters of the plan power Windows?

  Can I ask you if you use the preinstalled Windows operating system from Toshiba?

  Overheating can be caused by the driver display so it of important that you use the latest version of driver Toshiba screen.

• P50 fan high speed BIOS v1.29

  My P50 was silent, but since I updated the BIOS to 1.29 (for RAID capability), the fan seems to turn from time to time. I noticed the noise as it sounds like an engine Jet, each time in a row about 5-10 minutes before leaving silent.

  Spec: CPU i7-6700HQ, 64 GB RAM, NVIDIA Quadro M1000M, FHD screen. Updated the operating system of Windows 10 Home of Windows 10 Pro and standard 500 GB drive HARD 500 GB Samsung 850 evo SSD. Last change between the noise of the fan is just the upgrade of the BIOS. Weird.

  The most recent BIOS resolved 1.30 fan noise problem. It is also silent on the BIOS 1.28.

  If you still need the 1.29 configuration:

  CPU: 6700HQ

  RAM: 32 (4 x 8), 1 x 8 original Lenovo, spare parts 3 x 8

  no docking station, but not connected to a monitor FHD + USB docking station.

• PowerEdge 2900 Fans full speed, amber LCD but no text

  I have a Poweredge 2900 which powered on and boots. But fans come to full speed and the front LCD is amber and speechless. He pitied the Remote Access Controller initialization failure. It starts up fine otherwise fine.

  I tried updating the BIOS to 2.7.0 and disconnect all power and remove the CMOS battery. But I can't always clearly the problem.

  What can I do about it?

  Photos here

  http://i.imgur.com/Fh1aDp1.jpg

  http://i.imgur.com/Q3LStpK.jpg

  Hello.

  Speed of the fans of the system is governed by the DRAC/BMC. Attempt to update the BMC http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=C6H4X Else do a soft

  reset the DRAC.

• Dell Optiplex 9020 fan slow speed

  Hello

  I'm pointing out the CPU of my Dell Optiplex 9020 and I noticed that the temprature rises and and the fan speed remains the same.

  I used a software monitoring temp to know what is the problem and you can see the main CPU temperature remains low, while the rest of them is much higher.

  Also, the fan speed remains the same...

  

  Is this normal?

  i5 / 16GB / 500 GB/W10 with all the latest news from drivers/BIOS using Dell order Update

  The fan speed when it hit 74ºC?

  The fan speed has increased during the diagnostics, which should have?

  You can go on the Intel site to check what are the temporary specifications for your specific CPU, if that will make feel you better. But same 74ºC seems not very hot.

• Tecra A8 - no CPU max speed under the "full power" profile of PowerSaver

  Hello world

  My Tecra A8-S8514 (Core 2 Duo T7200 @ 2 GHz) has this problem: when I put the PowerSaver profile to 'Full Power' of the CPU sets his speed at 1.4 GHz.
  My company has purchased 2 of the A8 and testing has been replicated in the second laptop, which leads me to believe that there is a bug with the PowerSaver application instead of a faulty hardware.

  The Toshiba helpline ignore the fact that the 2 laptops have the same problem, insisted that I should do a system restore and it does not solve the problem so take it to a service center. There was no way 'experts' would admit the application could be evil and submit an application for the programmers so that they can test and engineer a fix.

  Please someone else with a Tecra A8-S8514 can test this? I used the utility Intel Processor and a free benchmark called GeekBench.

  Thanks in advance!

  Hello

  I don t think that the Toshiba Power saver is defective.
  To my knowledge, these tools are tested a lot of time and should work fine.

  In your case, I recommend to check settings in the Toshiba HWSetup.
  You'll find the CPU tab.

  There, you should check if the frequency of the processor dynamic Mode is set to high or dynamically switch able or always low. These settings may have an influence on the speed of the CPU.

  Best regards

• Qosmio X 70-A-13th-what is the problem with cooling fan?

  System: Toshiba x 70-13th with Evo 850 256 GB Samsung SSd
  Windows 8.1
  Intel Extremutilitiy - Voltage of the CPU Dynamik Offset 84,96 mV
  3D Mark 06 Score: 24096

  Thermal paste CPU/GPU: GCelid Solution GC Extreme
  temperature: MAx CPU: 85 ° C low game of normal of 45-49 ° C 41-45 ° C: 75-80 ° C

  Fan Max Speed: 60 % (bad hard)

  What is the problem with the fan?

  What is the problem with the fan?

  Why do you think that there is something wrong?

  I found your other thread on the review of the thermal grease...
  https://Forum.Toshiba.EU/showthread.php?82764

  Looks like you have replaced the thermal paste... right?

• Satellite L670D-159: touchpad problem

  I have the erratic behavior with my touchpad.
  Everything works fine and after a while, everything is frozen. I can't use the touchpad.
  Sometimes, the "tab" I want to save my work, and reboot the system.
  But I do not have to manually stop.

  I have the latest driver telecharged, "version 15.0.8.1 10/03/2010 Synaptics. But no change.
  Can you help me please?

  Concerning

  More information: I return to my post for the problem appears right now!
  So live: temp °: beetween 36 ° and 40 °. Fan max speed: 62%
  The touchpad does not work, but this time the '. insertion point' is able to move!

  If for example, I am writing this post with the finger, I put the "PointInsertion" where I want to and click on the left button: it is right and I can write to this location.

  Close other windows, I use tab, button left and right.
  In conclusion, I think the bad (?) material is only sensitive touchpad.

  What should do?

  > Everything works fine and after a while, everything is frozen. I can't use the touchpad.
  > Sometimes the "tab" I want to save my work, and reboot the system.
  > But I do not often have to stop manually.

  Have you noticed the same thing with the external USB mouse?
  If the problem is the same using the USB mouse and touchpad then the issue is NOT related to the touchpad, but maybe other reasons may be that the system is overloading or the operating system may be corrupt.
  Have you tried new installation of the OS?