I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type.

Similar Questions

• If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?

  Volumn Shadow Copy Service Componet error 0 X 80042302 (Windows 7)

  If I re - install Windows 7 Premium (Vista is the original) is very unusual that I have to watch it?

  If the reinstall is successful then can I re - install my files and photos of my click-free backup hard drive or do I have to drag over the old Windows?

  Thanks for any help!

  Phil C

  You can make one in place-setting day (repair install) using the dvd.  Who reinstall Windows, but does not remove your programs, drivers and files.  You should back up your data first just in case.

  The dvd must be equal to the same service pack level or higher than the windows that you fix.  Check the label on the dvd to see if includes a service pack.  If this isn't the case, you must uninstall service packs on your system before you begin.  Subsequently, you will need enable back again to Windows Update.

  Start the in place--update by inserting the dvd while the office is running.  Click on install now on the start screen, enter your product key when asked and choose install upgrade when the Setup Type selection screen appears.

  Until you do, you can run the System File Checker, because it can replace the files with the right that are cached on your damaged system.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Reset.  That can solve your problem without having to reinstall.  It can not but its worth a shot.

• Just installed icloud and itunes. In the Itunes store preferences when I applications boxes music and books and press ok, computer get autherise error message how do I

  Just installed icloud and itunes. In the Itunes store preferences when I applications boxes music and books and press ok, computer get autherise error message how do I

  If you open itunes,

  At the top right, you will see if your signature at.

  Once you sign up on the left,

  Click on Store and then let the House load,

  Yet once, click Bank to authorize this computer is listed.

  Enter the same apple ID and password when prompted.

• Vista, why my cursor jumps around on the screen without reason?

  Vista, why my cursor jumps around on the screen without reason?

  You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

  This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

  If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

  I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Mouse for laptop Windows XP behaves strangely and keeps jumping around when we type

  original title: madness of cursor

  Slider mobile phone from my friend XP jumps constantly around every time we type, which causes everything we are typing to mingle around where the cursor crazy going. You can type a word or a few letters and the stupid cursor will jump around. I don't know what could be the problem or how to fix it. Please help me before this laptop GHG thrown on the deck!

  Hello

  1. don't you make changes to the computer?

  Method 1.
  Disable the touchpad on your laptop and check. You can also try to use an external mouse and check if the problem persists. Download and install the latest drivers touchpad from the manufacturer's website.

  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• I just installed a 2nd ATA drive, now the computer (SR2150NX) does not recognize the CD drive.

  Computer Compaq SR2150NX Vista Home. Device Manager does not display the CD/DVD drive after installing a hard drive from second on the tablecloth that is also connected to the CD player. The new drive is seen fine. If I pull the power of the new drive and restart, the drive is visible again. The disc was a secondary drive in another computer, so it is set to be a slave. How can I get both work?

  It is perhaps as simple as changing the jumper on CS (Cable Select).

• Install Windows 8 - I get where the downloads page. When I click on 'Open' nothing happens. Tried searching the records hidden - nothing!

  I currently have installed Windows7 x 64.  I had previously and unsuccessfully tried to install Windoes8 preview. Now, I try to install the full Windows 8.  I went to the Microsoft site, clicked on the download Pro now [$39.95].  He appears in the downloads, but when I click on 'Open' nothing happens.  I looked into the hidden folders and it does not appear anywhere.  Great mystery!  Where can it be?  Can something be blocking the opening?  Is there another way I can check if it is even downloaded to the PC?     Thank you.
  PS - what I get from the download page is the Upgrade Assistant that is what does not open on the PC.
  Update - has managed to enter the program when I clicked on the Start button and then clicked on "Download Windows".  I ended up finding a message that the download was unsuccessful due to an unspecified error.  Just a matter worse.  Some little problem with my system?

  Try to rename or delete the Web installation folder and try again.

  C:\Users\\AppData\Local\Microsoft\Web install

  Please let us know if you are able to continue after trying the above

• Data NMEA which are received on the serial port, when the system starts causes windows 7 to interpret these data as a serial ballpoint mouse and moves the cursor jumping around.

  I know this question was asked several times before, but the solutions proposed, such as changin the registry does not help. It changes by itself. In the configuration that I have in my boat, the stream of NMEA data is directly injected into the COM port so no driver is necessary. It's a problem easily solved in windows XP, why is it so difficult in W7? There must be a way to permanently disable the plug-and-play driver load. I found this program that works only for Vista, if I understand correctly: http://www.stentec.com/en/download-freeware COM port plug & play blocker. If something similar could be provided by MS for W7, it would be very good...

  It turns out that the program at the port of Stentec COM (freeware) http://www.stentec.com/en/download-freeware care & play blocker, also works in W7. I don't know how it works, but it does, and it's good for me! It also works for the virtual serial ports.

• I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.

  I just bought a new desktop computer using Windows 7.  I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.  I need help please.

  The Vista system export your contacts and send to CSV files, then import them into Windows Live Mail.

  Good luck.

• On Win 7: I just installed windows 7 and now I can't play properly. They run slowly.

  I just installed windows 7 and now I can't play properly.  They run slowly.  I tried to download the drivers updated my video card without success.  Do you have any suggestions?

  Windows 7 comes with installed DirectX11. In order to run your games, you need to install the package DirectX9 and updates here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  This should make your games run better.

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• T60: Just installed windows, how do I fix my shortcut keys and the blue ThinkVantage button?

  Hi guys

  I just installed Windows Vista on my T60. Now, I have a problem to my keyboard shortcuts work, it's key to 'silent', ' + / volume "and the more important my blue ThinkVantage button.

  I've looked everywhere on lenovo.com, but he can't find anywhere?

  Another problem is that I don't know how to activate my wireless without using the blue ThinkVantage button.

  I had only my T60 for 2 months and don't know much about how it works.

  Help, please...

  Best regards

  I answered your question "in the face".

• Just installed Windows 8, iTunes crashes constantly, printer is not found, other performance problems persist. Miss Windows 7...

  I just installed Windows 8... iTunes crashes regularly now... my printer HP is found... the Office freezes / crashes regularly.  I regret after installing Windows 8... does anyone have any suggestions on how to fix these issues... or how to remove safely Windows 8 without hose completely my PC?

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  iTunes for Windows: how to disable Compatibility Mode
  http://support.Apple.com/kb/TS1489

  iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32."
  http://support.Apple.com/kb/TS1406

  -------------------------------------

  Freezing of funds:

  • Press Windows key + R
  • Type: MSCONFIG.
  • Press enter on your keyboard
  • On the general tab, click Selective startup.
  • Under Selective startup, clear the check box load startup items.
  • Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  • Click OK.
  • When you are prompted, click on restart.
  • After the computer starts, check if the problem is resolved.

  Run the System File Checker utility.

  SFC/Scannow checks your Windows installation for errors and correct them. This will help ensure that a smooth upgrade occurs.

  Press the Windows key + X

  Click prompt (Admin)
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  -----------------------------------------

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7 or 8.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer by button Windows Troubleshooter by pressing on + X and then clicking Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer