HP TouchSmart Envy 15: HP Envy accelerometerst.exe error cannot start

Similar Questions

• HP ENVY 17-j005tx Notebook PC, AccelerometerSt.exe - open pop - start up of the system error

  Hello

  I use a HP ENVY 17-j005tx Notebook PC with the latest installed Windows 8.1.

  Whenever I start my computer, I get the following pop-up message:

  "AccelerometerSt.exe - system error - cannot start the program becaue mfc110u.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I don't know how to fix this? There are a lot of questionable research sites that offer downloads for these "missing files" but I'm sure that's not the solution.

  Could someone possibly offer me some advice of bette?

  Thank you in advance.

  Hello

  The missing dll is part of HP 3D DriveGuard - you can download and reinstall this software from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards

  DP - K

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• AccelerometerSt.exe error

  HP Envy Rove 20 "update of windows 7 to 8.1 to windows 10 somewhere along the way and then I started getting the error code"Erronr AccelerometerSt.exe - Application the application failed to start correctly (0xc000007b). "

  I don't know what it does or how to fix it.

  Mrine01

  What is the number of complete product or the name of the product from your laptop?

  1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.

  Installation of version 10 of Windows of the HP 3D driveguard software should solve the problem. Use the below download link.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

• AccelerometerSt.exe error system mfc110u.dll is missing

  every time when I log on my computer I went to pop up saying "error AccelerometerSt.exe System mfc110u.dll is missing. Please help me solve this problem. My product name is below:

  E6G12PA #ACJ

  HP Pavilion n003tx-15 Notebook PC (ENERGY STAR).

  Hello

  Try the following.

  Open windows control panel, open programs and features, right click on the entry for "HP 3D DriveGuard" and select uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, download and install the latest version from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  When the installation is complete, restart the computer again.

  Kind regards

  DP - K

• HP ENVY Sleekbook 6-1006sa: cannot start computer laptop

  My hard drive seems to be corrupted, and now my laptop does not start.

  Of course, the normal solution is to use the HP recovery disk, but my laptop can't even attempt to boot from my DVD drive (external). Market, I get a message in the lower left corner, saying "Press ESC for Boot Menu". At this point, if I press the ESC key all that get's the message replaced by 'ESC. '... Pause for Startup' - and no other update screen - never (well, at least 10 minutes). If, while in the stadium "Press ESC for Boot Menu", I press F2, the message is replaced by "F2"... Check startup' but then no progress is made.

  So now I'm at a loss to know what to do next. Please can someone help?

  Regards Tony.

  I solved the problem by:

  1. visit this page: http://hp.com/go/techcenter/pcdiags and using the last link to download ftp://ftp.hp.com/pub/softpaq/sp75001-75500/sp75230.exe which puts the s/w of recovery BIOS on a USB

  2 turn on/off my laptop while now the key Windows + B

  3 wait a long time for my PC boot from the English channel and set its BIOS

  Once this is done, everything was OK again.

  Tont regards

• HP ENVY m6 1206 TX: cannot start Windows (8.1)

  The other day I wanted to turn my computer off and let it, because I was in a bad mood and wanted to get awy and do something else. But when I went to click on update and stop, I clicked on update and restart. I more wanted to leave everything to rest because he was for a long time on the computer. But I waited for the update that stopped on 27% for a long time, after going quickly through the others. It probably would have been fine, but I was imptient and took the incredibly stupid decision to force the computer to turn off because I was tired. The next time that I turned it, Windows wouldn't start.
  
  When I try to start the computer, it says:
  
  Auto repair
  
  Your PC did not start successfully
  
  So, I can either tap on restart to restart my PC that it can sometimes solve (this isn't for me). Or go to advaced options.
  In options advanced > troubleshooting, I can update my pc without losing the files but that fails.
  Then options are more advanced. I can do a system restore, but there is none. Same thing with system image recovery. Starup repair fails. Command PROMT... I don't know what to do. Even with the settings of the UEFI firmware. There is start parameters also right up. I don't know what to do with them.
  
  In a quick test of the system, everything going except Hard shore short check the DST, who said the warning. No info was given, which doesn't really help.
  
  I can do with these options that could help? Or should I send repair? Or, if the reset in advanced options option is different to the first, what should I do? I doubt that it is the same because he says that I will lose all my files, whereas it would appear to the other literally just restart the computer.

  Thanks for any help.

  Redstar86

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC is no longer to leave and wanted to help.
  
  The description of the problems you are experiencing generally indicate one or two of the following ways:

  (1) defective hard drive
  (2) damaged/missing bootloader files

  Already, you did the second and said that has not fixed the problems.

  And you have already received errors on the first.  To confirm the status of hard disk, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.

  If the drive has failed, you will need replace it and order the HP recovery media to restore your PC to a working state.

  As for recovery, onlu Refresh keeps the files; the other delete files - so before you make them, you must save all the files and folders you want to keep.  If you cannot start the PC enough to do this, you would need to remove the drive from the PC, buy a USB-to-Hard-Driver adapter, connect the drive to another PC and copy files and folders there.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Get 'error, cannot start. Setup can not continue"message when you try to run autorun.exe Fifa 2011

  Original title: error

  In fifa 11 when I run autorun.exe and put the serial key it says: error: could not launch. Setup cannot continue.     What should I do?

  Please help me!

  Hello

  Check if the game is compatible with Windows Vista Compatibility Web site.

  In the meantime, I would suggest you follow these steps and check to see if they help.

  Step 1:

  a. right click on the file and run as administrator.

  Step 2:

  Run the game in Windows compatibility mode and check if that helps.

• Message... BRS .exe program cannot start because msvcp71.dll missing. pls help.

  am under win 7, 64 bit. had something to do with HP 3 in 1 printer to the PC by using remove normal within devices/printers, as it had played all of a sudden, with difficulty (failed) reinstall removed!  a centuries-old HP drive for my system!, costumes to previous win and also not taken in charge now.

  also ran a file temporary cleaning via system tools and defragmented.  wake up message now on start... as above.  a scanner sfc, not found any internal breach. What is brs exe? and the dll file can be found somewhere in the SP and installed, which it is, why it is absent? reviewed 1 addictivetips.com solution proposal.  also found 1 suggestion to peer into MS Visual C ++ redistributable. Looks like once your out of warranty free very little real bug and help $free is available.

  Thank you.

  MG.

  msvcp71.dll is not a Windows file, it is a Visual Studio .net file and it is distributed by software vendors, you can have different versions of the file in the directories of different programs.

  John

• Could not locate the component Booster.exe. Cannot start MSVBVM50. DLL not found.

  I try to view the files on a CD and get the error message.  I tried the 'fix - it' of windows program nothing works.  My version of Windows Vista software is not compatible?  I had no problem reading DVD disk in the past.  Thank you!

  Hi Cbran,

  1. you remember to make changes to the computer before this problem?

  2. what Fixit did you run?

  It seems that the program that uses the MSVBVM50.dll file is corrupted by a reason any.

  Step 1:

  You maytry to run a SFC scan to check corrupt files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand DVD/CD Rom Drives and right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer and check

  Also check out the following link and try the steps of Andre.Ziegler Monday, May 31, 2010 21:25

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/b4b7df85-e33d-480F-a9b4-17fb8998cc4f

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP ENVY 15 t-j100 Quad Edition: AccelerometerST.exe 0xc000007b error

  By logging into my system, I get AccelerometerST.exe did not start successfully.  0xc000007b error.  How can I fix this error?

  Hello

  Try the following.

  Download the installer for HP 3D DriveGuard on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  One time finished, open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, click with the right button on the installer for HP 3D DriveGuard and select "Run as Administrator".

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• Want x 360: AccelerometerSt.exe/MSVCR110.dll question

  I recently bought a HP Envy x 360 (literally yesterday), because it was highly recommended by my help at best buy. Since yesterday afternoon, I had a problem with the display driver that comes will not be corrected.

  When I start my computer, it says that AccelerometerSt.exe does not start (give me code 0xc00007b), and when I try to run original on my computer to play the Sims, it is said that origin will not work because the 'MSVCR110.dll' file is missing, and my Google'ing suggests that the two problems are related. Also, last night I just watched a YouTube video and my display driver froze on me. Had to hard restart my computer to fix.

  I followed the instructions here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/AccelerometerSt-exe-system-erro...

  But it does not work. I can't find any other relevant results on here or the Microsoft page. I went on the site support.hp.com and ran the Solution and update Finder and downloaded the HP System Event Utility and Intel HD Graphics Driver, as he recommended. For some reason, my computer doesn't let me install the other driver (Intel Wireless Display Software), he suggests. I installed three times and no luck.

  I am bit out on a limb here when I bought a HP, and so far I'll have nothing but issues. The site I linked above says that somehow that this file has been deleted, but I don't know how. Is it possible to fix this, or do I have to go back to my laptop?

  Thank you

  Jordan

  Hi, Jordan:

  This error is related to a problem with the system 3D driveguard which parks the hard drive heads in case the laptop is deleted or moved.

  Several times, just reinstall the 3D driveguard driver support for your laptop and driver page solves the problem and in some cases, it doesn't.  The last thread I posted goes into some more detail if throwing everything simply installation does not work, but do not use the pilot who was listed.  You can only run one on your laptop specific assistance page... There are 3 versions of hardware 3D driveguard all using different drivers.

  You can see that ces-related posts where this worked.  There are many others...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/AccelerometerSt-exe-application-error/m-p/5231870/highlight/true#M312779

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/AccelerometerSt-exe-error-0xc000007b-on-startup/m-p/5206116/highlight/true#M309424

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/AccelerometerSt-exe-system-error-mfc110u-DLL-is-missing/m-p/4715866/highlight/true#M269123

  If this does not work for you, then I suggest you contact HP support, or if you can always return the laptop, then you can do the same.