HP ENVY Sleekbook 6-1006sa: cannot start computer laptop

Similar Questions

• Cannot start computer laptop

  Hello
  I have an Acer Espire E40 and I recently installed a kind of "PC Optimizer", he worked in the first, removal of unnecessary files. However, I then noticed deletion of system files. I killed the process and then restarted my laptop. When I turn it on, the Acer logo appears with "start auto repair. He proceeds to diagnose my PC and I am presented with the fact that windows may not start and I need to restore the operating system. So I click on restore but nothing happens, the Acer logo appears again, but nothing happens, its been like this for 10 minutes. Any help would be appreciated.

  Thank you
  Ethan.

  If you press Alt + F10 at startup you're able to enter Acer erecovery?

  If so, you probably have a restore or refresh options, try this.

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• HP ENVY m6 1206 TX: cannot start Windows (8.1)

  The other day I wanted to turn my computer off and let it, because I was in a bad mood and wanted to get awy and do something else. But when I went to click on update and stop, I clicked on update and restart. I more wanted to leave everything to rest because he was for a long time on the computer. But I waited for the update that stopped on 27% for a long time, after going quickly through the others. It probably would have been fine, but I was imptient and took the incredibly stupid decision to force the computer to turn off because I was tired. The next time that I turned it, Windows wouldn't start.
  
  When I try to start the computer, it says:
  
  Auto repair
  
  Your PC did not start successfully
  
  So, I can either tap on restart to restart my PC that it can sometimes solve (this isn't for me). Or go to advaced options.
  In options advanced > troubleshooting, I can update my pc without losing the files but that fails.
  Then options are more advanced. I can do a system restore, but there is none. Same thing with system image recovery. Starup repair fails. Command PROMT... I don't know what to do. Even with the settings of the UEFI firmware. There is start parameters also right up. I don't know what to do with them.
  
  In a quick test of the system, everything going except Hard shore short check the DST, who said the warning. No info was given, which doesn't really help.
  
  I can do with these options that could help? Or should I send repair? Or, if the reset in advanced options option is different to the first, what should I do? I doubt that it is the same because he says that I will lose all my files, whereas it would appear to the other literally just restart the computer.

  Thanks for any help.

  Redstar86

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC is no longer to leave and wanted to help.
  
  The description of the problems you are experiencing generally indicate one or two of the following ways:

  (1) defective hard drive
  (2) damaged/missing bootloader files

  Already, you did the second and said that has not fixed the problems.

  And you have already received errors on the first.  To confirm the status of hard disk, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.

  If the drive has failed, you will need replace it and order the HP recovery media to restore your PC to a working state.

  As for recovery, onlu Refresh keeps the files; the other delete files - so before you make them, you must save all the files and folders you want to keep.  If you cannot start the PC enough to do this, you would need to remove the drive from the PC, buy a USB-to-Hard-Driver adapter, connect the drive to another PC and copy files and folders there.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Cannot start computer? vill will not accept my code

  When I start my computer, it says - will not accept your profile and can not start and I tried many Jules Destrooper. O (sorry my English not good...)

  Hello

  There may be help here in a better language for you - Up at the top where it is said to the United States - English - click
  that and look at the other languages.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• cannot start computer in safe mode vista

  Laptop was working fine when I went to bed, got up the next morning, you press Ctrl + Alt + Delete and computer is stuck on the welcome.  It's been that way.  I can only boot into Safe Mode - Networking.  Ironically, the problem started after Symantec performed an update on March 22, 2012.  Any suggestions

  Looks like you may have a virus or other malware. Get your updated antivirus program and run a full scan of the system.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Cannot start computer in mode normal mode only safe

  When I start my computer it only starts in safe mode. I can't boot into normal mode. What can I do to change this? I tried to start it normally, but it won't let me. Another thing is that I have a problem with is the resolution. I have a 19 "monitor and it will not stay on 1280 x 1024. I don't know what the resolution would be better, but is the 1600 x 900, I think that before the problems started.

  When I start my computer it only starts in safe mode. I can't boot into normal mode. What can I do to change this? I tried to start it normally, but it won't let me. Another thing is that I have a problem with is the resolution. I have a 19 "monitor and it will not stay on 1280 x 1024. I don't know what the resolution would be better, but is the 1600 x 900, I think that before the problems started.

  RE: starts only in Mode safe

  Find out if a check mark is set to boot in Safe Mode.
  Start button > in the search box, type msconfig > press the Enter key > uac prompt > click on Startup > make sure that no checkmark found nowhere > click OK when finished.
  See screenshot:

  

  RE: resolution
  If you go to the view window, can not move you the cursor down to the left until you see 1280 x 1024?

  Right-click in an open office space > personalize > display settings... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• HP TouchSmart Envy 15: HP Envy accelerometerst.exe error cannot start

  Hi, get the following error message:

  AccelerometerSt.exe - Application error

  The application was unable to start correctly (0xc000007b).

  Try reinstalling the file from a link in a forum earlier, but got the error message that a new version is installed.

  Thanks Jordi

  Hello:

  See if this driver works...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_151035_1

• Cannot start computer

  original title: can not stsrt computer

  Under mode normall I end up with a white screen

  Under repair mode all the getting is checking your system for problems

  I tried to boot from the cd but did not press f12?

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  See you soon.

  Mick Murphy - Microsoft partner

• P580 BIOS update. Cannot start computer.

  I was preparing to install Windows 8.1 and read on the site of Lenovo I should get the bios update.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?docid=HT073634

  On this site, I clicked to download and install the BIOS. Once the system is restarted, I got this message immediately.

  Hi DivineSire,

  As far as I KNOW, the Dolby Home Theater is included when you install the audio driver.

  If you have a device his Conexant, try to uninstall the current (including Dolby) and install the one below:

  Conexant Audio driver
  audio130w81.exe
  185 MB

  Concerning

• OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

  Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

  Any suggestions?

  Hi @dburbage,

  I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

  Thanks, I look forward to hearing back on your part.

• black screen when I start computer laptop

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have a Hi-grade laptop that runs on vista home basic.i had a problem with the computer that was on the computer starts, I received the message BOOT mngr is compressed press ctrl + alt + del to restart that passed over and over again.i got a recovery disc that I managed to fix the comp with Entercom command prompt and enter bootrec.exe/fix boot.comp now starts now and again well im having to use recovery of drive more ofter which is almost everytime I start comp and fix boot which is really frustrating.i would really appriciate some help please im at my wits end

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Here is the complete troubleshooting tool. Make sure to run the system restart, then SFC/scannow tool
  and chkdsk /f /r (CheckDisk) from the command to a startup disk.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot start the laptop

  Hi, I currently have a serious problem with my Pavilion g4 laptop with Windows 7 Home Premium 64-bit.

  Last night after I finish using my laptop, I closed the lid as I normally do and we both fell asleep.

  But this morning when I opened it again, instead of start normally, I got this error: Oxc00000e9 and I was unable to start Windows. I had not any attached USB devices so I'm afraid it might be a problem with the hard drive.

  I tried in Safe Mode, but after loading of the files it has stopped working and I was given a Startup Repair option.

  After that the laptop has been blocked for a few minutes in a gray with slider Windows screen until the repair window appears. He work and asked me to reboot to see if it worked or not.

  He took a little everything restart, the Windows loading icon came but then instead of booting the system I was sent again to a screen that looks like the Startup Repair, with the cursor above but nothing else.

  He was blocked for half an hour on this screen, then this window will appear:

  Windows Script Host
  Script: X:/Rita-tool/Start.vbs
  Line: 93
  Tank: 14
  Error: The system cannot find the specified file.
  Code: 80070002
  Source: (null)

  Then I got another window:
  HP restore
  Create file Fail

  A click on OK

  Got another window:
  HP Recovery Manager
  Contact HP customer care
  Recovery not taken in charge to the title of the current configuration, please turn on the option for the Intel Smart Response Technology, and try again.

  After that the laptop turns itself off.

  I'm out of warranty of two months, but would like to know if there is anything I can try before you take it to a technician.

  Help, please!

  Thank you

  Thank you

  I was able to solve the problem of boot from the Windows CD repair and run repair there system.

• Blue Screen BAD_POOL_CALLER cannot start the laptop after Windows XP updates

  My user has a Dell Latitude E6500 and after installing Windows Update, the laptop does not start in Windows XP.  Tried to repair, reinstall all Modes and each option we just get error BAD_POOL_CALLER not boot into the operating system.

  Reference Dell it's a software problem, probably caused by the update as no other changes have been made to the laptop.  Before we pay for Dell support software means someone has suggestions?  All options on Googling guess you can enter Windows in at least secure Mode that we can not so I'm stuck!

  See you soon

  See this article for some real good troubleshooting Info:

  0X000000C2: BAD_POOL_CALLER
  http://aumha.org/a/stop.htm

  Also:

  How can I solve this? (bad_pool_caller)?
  http://www.Tek-Tips.com/viewthread.cfm?QID=423270

• Lenove z510 battery - cannot start the laptop

  Hi all

  I bought a lenovo z510 7 months ago. It was working fine. Suddenly, battery does not charge while the AC adapter is connected. Then, she fell to zero, and now I can't open. It recharges even now.

  I tried to uninstall the ACIP, the energy Manager,...; However, it did not work.

  I would appreciate your help.

  Kind regards

  Maha

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you