HP touchsmart Tx2-1020us keyboard and boot beep questions

Similar Questions

• HP TouchSmart tx2-1020us Notebook PC, locked in hybernation wake up

  lid on laptop... Later that evening, I opened for laptop and computer laptop would not go out of hybernation... I made a hard stop down, I unplugged everything, but the mouse I've even pulled out the battery for a few hours and nothing works... All the lights are flashing caps and made light in the upper right of the pc... Can someone tell me what I can do... I've tried Ctrl-alt-del and nothing works... My Bios is bad?... The screen is black and white... Help, please!

  Hello Lilmtn.

  I see that after your laptop goes into hibernation mode, you were unable to wake up or have it load into Windows. I will try to help you with this.

  Based on what you described in your post and the laptop wouldn't boot up correctly have a reset, I would say from this document: computer does not start and the lights blink or computer beeps. The LEDS you mentioned may be indicating an error code.

  Read the document, see if you notice a code. If you do there are subsections covering troubleshooting this code. At most, it can lead to a hardware problem with something, at this point I don't know for sure what.

  Please let me know how it goes. If you have any other questions, feel free to ask.
  Thanks for posting on the HP Forums.

• HP touchsmart tx2-1025dx pc

  Hi I have a Hp Touchsmart tx2-1025dx pc and he go and turn on the locking caps keeps blinking and the computer doesn't show anything on the screen, but all the lights are on and I hear the fan sometimes it works sometimes is not anyone can help with this

  Hi Hernandezerick2 and welcome to the Forums of HP!

  I understand that you have a problem getting your HP TouchSmart tx2-1025dx Notebook PC to turn on. I'll try my best to help you solve this problem.

  Here is a document for computer does not start and the lights blink or the computer will beep with information about what mean lights and beeps and how to fix it.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• Wired keyboard and mouse to my TouchSmart IQ528a

  Can I add a wired keyboard and mouse to my TouchSmart IQ528a if so where they connect?

  Hello

  Sorry me again. As mentioned above, wireless keyboard and mouse have batteries around the red circles. I can't find who they are, but I think that they are normal AAA or AA batteries, you can open and review (below):

  

  Kind regards.

• When I type on my keyboard my laptop beeps and the keys seem to react quickly to be like.

  When I type on my keyboard my laptop beeps and the keys seem to react more quickly especially when I hit the same key twice.  My cat has been on my keyboard, and when I found it on it there was all kinds of screens that she had accessed... ridiculous!

  Hello

  I suggest you to perform a system restore to restore the computer to an earlier point in time before the problem started.

  Refer to the article help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Boot Camp keyboard and trackpad will not work. They do in Fusion

  Hello

  I have a problem with my VM ware / boot camp of activation. I have a Boot Camp partition on my Macbook Pro. I am able to boot the disc using the fusion, but when I try to use Boot Camp coming to the windows activation screen and my keyboard and mouse do not work so I can't press the button to continue. I tried to boot into safe mode on boot camp and the keyboard and mouse are not recognized either. I tried to plug in a keyboard and a USB mouse generic and is not no longer works. I am running XP pro (not OEM version).

  Does anyone have any suggestions on a cure?

  Hi tsugua,

  This sounds like it may be more than one Apple, or Microsoft problem. However, my recommendation would be to ensure that the leopard drivers have been properly installed. To install the insert drivers your Leopard installation disc and run the setup.exe if is not autorun. So, make sure you run software updates of the Mac OS to ensure you have the latest version of the Bootcamp drivers.

  Let me know if this helps.

  Eric

• TX2-1025dx keyboard problems

  Hello

  I bought a laptop computer to the touchsmart tx2-1025dx around June 5, 2009. I used about 3 times since I bought it. The last time was in the works to make some AutoCAD drawing. While using it, I noticed that some of the numbers (in the line just below the F1 to F12 keys) has stopped working. As a matter of fact, only the number '5' and '6' keys work. I can't get the missing numbers by using the 'Num Lock' function on the keyboard. I noticed that many users (more in the business forum) have problems with their keyboard is completely non-functional in some cases; with no report of everything be partially functional. However, I tried a few of the solitions has recommended the following:

  (1) I'm tired re-booting.

  (2) I tried updating the BIOS to F.14

  (3) I tried to uninstall all the mice and the software keyboard from Device Manager and re - install by using HP Recovery Manager.

  (3) I tried updating the software of HP - QuickButtons (?).

  (4) I tried to unplug the laptop and remove the battery, then sliding and holding the power button on the position for three minutes (in one instance for a couple of hours with a perfectly sized hex bits), then re - plug the battery and power supply and re-start.

  (5) I tried a system restore to factory settings.

  (6) I have tried resetting the BIOS to default factory settings, save and reboot (where I also discovered the keys do not work, so there must be something at the BIOS level, maybe hardware related).

  None of these options worked. The keys still don't work... the funny thing is that I got them to start work ONCE at the login screen, then in windows. After a re-start however... that's all...

  Does anyone have any ideas (other than replacement under warranty... which is, I think I'm going to go). I want to just make sure that I really tried everything.

  No seriously, there is not "Any" key.
   

  Thanks for the information, that's what I needed to help me make a decision.

• TX2-1020us digitizer cursor gets stuck 1cmx1cm of the upper left corner

  I have a tx2-1020us

  Sometimes, the stylus cursor takes over and gets stuck about 1cmx1cm from the upper left corner of the screen if the screen is 90 degrees or to move away it from the keyboard when you use it as a laptop. If less than 90 degrees, when this happens, it's somewhat usable but the slider still jumps at the skylight at random.

  I've known as a locking of the keyboard once but removing the power and the battery it is resolved.

  To troubleshoot, I ran the HP and N-trig utilities and they found no problem so even the question that happens. I downloaded the latest drivers from this site and install, I searched on Google and Asus seems to have a similar problem but I don't know if this applies. Sometimes, when I reboot it goes far, other times it is not. Deactivation of the first N-Trig driver stop the question but then of course, do not work the key features.

  I installed the software (for most, MS Office, Corel PSP and NeatWorks) and installed a scanner NeatWorks and GPS MS on it since I bought it last Friday (not connected when it is the case).

  Has anyone else seen this, they are of a resolution, I would stay before 15 days runs out?

  Problem solved!
  
  Turns, I have a desk lamp fluorescent light about 15 cm from the laptop.
  
  When the lamp is on and the laptop is plugged in, it does the cursor thing erased. Unplug the laptop or move the lamp 25cm and everything works perfectly. Go figure.

• TouchSmart tx2-1370us Recovery Disc Set failure

  I am writing on behalf of my sister.  Here is his story:

  Screen of her laptop TouchSmart tx2-1370us broke earlier.  It's under warranty where she bought in so he was expelled to be repaired.  When he returned, the screen has been set, but there was a note indicating that they had lost its Windows 7.  The computer loaded and executed perfectly, but it was the pop-up "is not a genuine copy of windows.  She claims that she was unable to read the sticker product key the computer good enough to get it to accept anything, she entered.  When she called the store, they said that HP would be able to help get it back.  HP sold its recovery disks which were to restore the computer.  It is a 3 disc set, marked 2 System Recovery DVD Windows 7 Home Premium and 1 additional CD labeled Application & Driver recovery CD.  CDs ran several times still to come as fruitless after the first 2 CDs.  I won't get in his experience of the customer support, but she claims that she spoke on the phone with HP 6 times in the course of a week and nothing they had to say or to offer.  Always unsuccessful recovery message.  She abandoned, almost crying at this time, and I said I'll try.

  After a bit of searching I found a patch on the HP website that would supposedly solve the problem of recovery disks.  The patch was properly installed, green checkmark and all, and all 3 CDs was successfully.  The computer restarts, the screen of the Installation of the HP software ran for a while before another restart then the usual recovery failure message.  I tried many times with the same result every time.  I saved the newspaper from the last go to it and post it below.  It seems the States BIOS Vista as OS, but she bought the computer pre-loaded with Windows 7.  Could there be something in that fact cause a problem?

  Someone suggested to reset the BIOS to factory default, but that didn't work either.

  When you save the log to USB, I could see all of the files, there are 3 readers listed SDV (C Local disk (D & BOOT (X))

  For any help or suggestion would be appreciated.

  Here is the log:

  --------------------------------------------------
  [2:30:01.41] enter audit OS Edition...
  ----------------------------------------
  [2:30:01.41] check RStone.ini file to determine the required edition.
  [2:30:01.44] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [2:30:01.46] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [2:30:01.47] current edition is [HomeBasic]...
  [2:30:01.47] [start] necessary. Don't need to upgrade...
  [2:30:01.47] [Starter] needed...
  [2:30:05.17] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [2:30:05.17] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7600.16385

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  Error found: you have set the flag of Vista on an image of Win 7, please use EEPROM to set ~ OS SKU ~ value = 2
  ---------------------------------------------------------------------------------

  [ 2:38:37.07] ------------------------------------------------------------------------------------------
  ...
  Failed to update factory! ***
  [2:38:37.07] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [ 2:38:37.07] ------------------------------------------------------------------------------------------
  [2:29:20.80] Start BBOffline.cmd...
  UPDrv = [C:]
  [2:29:21.35] value UIA 951 error Code
  [2:29:21.68] start [corrections].
  [ 2:29:21.68] ---------------------------------------------------------------------
  [2:29:21.68] FixUps.cmd...
  [2:29:21.68] create overall progress information...
  [2:29:21.72] complete FixUps.cmd...
  [ 2:29:21.72] ---------------------------------------------------------------------
  [2:29:21.72] start [Tweaks for SDRD].
  [ 2:29:21.72] ---------------------------------------------------------------------
  [2:29:21.72] SDRD Tweaks to change the regional settings default user...
  [2:29:21.72] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [2:29:21.76] Run "IntlCfg.exe - skudefaults: US-image: C:
  [ 2:29:27.64] ---------------------------------------------------------------------
  Housing starts [2:29:27.64] [Sleep 10 sec].
  Starting price [2:29:37.68] [creation RStoneFUpdate.INI].
  [2:29:47.78] start [create 1 GB Pagefile for offline].
  Volume in drive C has no label.
  Volume serial number is 60E6-4F60

  Directory of C:\system.sav\bbv

  01/01/2001 02:29 1 073 741 824 pagefile.sys
  1 file (s) 1 073 741 824 bytes
  0 26,019,311,616 dir bytes free
  [2:29:47.85] start PININST.exe for offline...
  [2:30:13.27] Start SysID Check...
  [2:30:16.34] Start Option control code...
  [2:30:18.37] Start PIN Tweaks...
  [ 2:30:19.44] ---------------------------------------------------------------------
  [2:30:19.44] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [2:30:19.44] update PININST_BBV.ini...
  [2:30:19.46] update PININST_BBV2.ini...
  [2:30:19.48] update PININST_BBV2POST. INI...
  [2:30:19.49] update PININST_BBVClean.INI...
  [ 2:30:19.52] ---------------------------------------------------------------------
  [2:30:20.40] starting factory updates...
  [2:30:27.43] installation start QFE offline...
  [2:38:36.81] PININST_OFF: PAST...

  [2:38:36.91] Type C:\System.sav\Logs\BBFindEr.log...

  [2:38:36.93] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [2:38:36.93] FUList.log to check if there are double Desc...
  No duplication.
  [2:38:37.05] duplicated No. Desc is located... PAST.
  [2:38:37.05] there was no update from the factory...

  Lets take a chance it's for W7

  Go here and download the correct version of W7 (home or pro, they have not a starter edition), version 32 or 64 bit and the language, it's going to be a file iso very large, once downloaded, burn it to a blank disc DVD + R as an Image, this can be done on a Windows 7 PC, right-click on the iso file and select 'Open with' > 'windows disc image burner.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  This will make a regular windows 7 installation disc allows you to get Windows installed, use the key to see if it will be ignited.

  Then, you will need to download the drivers for your specific model on the HP site and install it.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4041813&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

• HP Touchsmart TX2 1270US reinstall Windows 7

  Hello

  I have a HP Touchsmart Tx2 I 1270US updated since Vista about six months ago. Quite recently, my laptop started to act up. Now it crashes when connecting (just before my password screen), I have to force close down. It freezes Explorer (that prevent me from throwing anything) and slowed down considerably. I would like to do a clean install and reinstall all my software from HP site. The two questions I have are,
  Can I reinstall Windows 7 with my upgrade disk? I really don't want to have to go back to Vista (Wait For hours while bloatware and the drivers are installed) and then attend re-setting level to Windows 7.
  The other issue I had is on auto rotation (it's a coincidence that it is). The screen rotates automatically to the opposite landscape when I convert it to a tablet. Does anyone know where is the driver or the file to do this? I don't see it on the HP support site.
  Also, I do not make an image of the system because of the space (or lack thereof) on my external hard drive (Excuses, excuses)... So I can't just restore.
  Thanks in advance!
  P.S. I found all the other drivers and files I think I need on the site of HP support (I hope so: O).

  To avoid having to phone activation, it would be better you really reinstall Windows Vista, and then repeat the upgrade. If you don't want...

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• HP Touchsmart tx2-1275dx

  I have a HP Touchsmart tx2-1275dx that I bought at Best Buy and there is no technical support on the site of HP information.   Is there an equivalent model whose support is?  I need to know the configuration of the product and especially map mother, keyboard, monitor, and memory specifications.

  Hi sazn,.

  Here is the support page for this product:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3979556&LC=en&DLC=en&cc=us&tool=&query=TX2-1275dx

  Product specifications can be found here:

  http://support.HP.com/us-en/document/c01761014

  Is there something in particular you are looking for?

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• Satellite-C70-A-119 - keyboard and touch pad down

  on win 8.1 keyboard and pad are more functional, maybe was an update of the autopilot. I tried to remove the battery, reinstall the drivers. I am writing with visual Ko, boring. USB works well.

  What can I do?

  Keyboard works when you start your laptop and use F12 to get into the boot menu?
  Have you tried to roll back OS to an earlier time using System Restore option? Test it please?

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment