Satellite-C70-A-119 - keyboard and touch pad down

on win 8.1 keyboard and pad are more functional, maybe was an update of the autopilot. I tried to remove the battery, reinstall the drivers. I am writing with visual Ko, boring. USB works well.

What can I do?

Keyboard works when you start your laptop and use F12 to get into the boot menu?
Have you tried to roll back OS to an earlier time using System Restore option? Test it please?

Tags: Toshiba

Similar Questions

  • Satellite C660-28 d - keyboard and touch pad problems

    Hey guys,.

    In the past months, my laptop had become almost unusable.

    It began with the key odd work stoppage or becomes difficult to use, but now it happened to many of them and last night my touch pad stopped working all together.

    I'm not really a tech head and fight with it.

    I have a Toshiba satellite C660 28 T.

    Any help would be thank you very much.
    Maybe even a factory reset?

    I don't know how to proceed.

    Concerning
    Paul

    Hello

    With regard to the problem of keyboard:

    From my point of view of the few sounds of keyboard described as a material problem internal related dysfunction... probably in order to solve this problem, the keyboard should be replaced... just to make sure that your internal keyboard is affected, please join the external USB keyboard and check if it works properly.
    If you see any problems, the problem is no doubt by a malfunctioning internal keyboard and as mentioned earlier, you will need to replace the keyboard.

    Regarding the touchpad:

    I'm not sure if the two issues are interrelated, but the touchpad can be disabled by using the function keys... I recommend you to check this... (function key details are also in the user manual)... you can also try reinstalling the touchpad drive.

    Tip: this forum contains many discussions about similar problems... so I recommend you to read the recommendations posted in this community.

  • Re: Keyboard and touch pad do not react on Satellite A300-20 q

    Hey everybody!

    I have a following problem. Keyboard and touch pad has become inadmissible without reason (at least I don't know why--I didn't install new software at this time here).
    When I try to charge my cell phone that it never closes, unless I push the power button.

    Help, please!

    Have you noticed the same behavior when you start your computer in safe mode?

  • Keyboard and touch pad stopped working on Satellite L750

    My laptop L750 keyboard and touch pad stopped working on start up. I now use a USB mouse and on-screen keyboard to do anything either. I have tried several things to fix, but nothing seems to work.

    I've updated keyboard drivers, tried related work key, updated and run antivirus software and restored to a point in time before the show. Still no luck.

    Any ideas?
    Thank you

    Keyboard drivers?
    Can you please send the link to download? It is unclear to me that the own keyboard driver.

    In any case, can you use keyboard and touchpad if you start the operating system in safe mode?
    Are you using the original pre-installed OS that you got with your laptop?

  • Need number for keyboard and touch pad reference Dynabook C7-

    Hello!
    I have a few questions on my PC laptop toshiba dynabook C7.

    I want to change my old keyboard and the press because they do not work properly. The problem is that I can't find these parts because this model was delivered only for the Japanese market. So maybe someone knows the number of models of these pieces that might be suitable for my laptop? Or the name of the laptop that is similar to my dynabook c7. The full model name is TOSHIBA DYNABOOK C7/212CMEN portege 4101 series

    Thanks in advance.
    See you soon!

    Hmmm... It can be quite complicated. As you probably know it is not easy to get the info on those specific for computers produced Japan portable. I'm quite familiar with models of Toshiba laptops and your laptop can be the same as Portege A100.

    Google around and try to find info on the Portege A100. In my view, that this laptop has been offered to the United Kingdom only.

    Also check in Google - P000398500 G83C0001Q710 for Portege A100 series, United Kingdom, Uk keyboard.

  • Yoga KB and Touch Pad disabled on Flip screen

    Hey just got my Lenovo Yoga 13.3 inches. Totally love it. But I had a problem. After that I rinsed the partitions and reinstalled windows my keyboard and touch pad disable when I flip the screen back. It's actually quite a serious problem for me because I like really amazing this guy back on the couch. I installed all the drivers from the site and went through the bios. Haven't seen anything specific to my problem.

    Help, please!

    I noticed that it seems to have to go further than before after resettlement. Still, it turns off when completely closed, but use it as a portable reverse as it seems hit or miss if it disabled for me as well. about 180 seems like it should be the point to turn it off, but it weel as it does not disable consistantly until a little past at least 270.

  • MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

    My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

    Hello rad trp,.

    Thank you for using communities Support from Apple!

    From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

    I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

    Reset the management system (SCM) controller on your Mac - Apple Support

    OS X Yosemite: reset PRAM your computer

    See you soon!

  • Satellite L300 - no response keyboard and mouse after Windows 7 upgrade

    Hi all

    After a new Windows 7 Ultimate installed on my PSLB0E L300, I lost the use of the keyboard and mouse pads.

    I did the installation with a usb mouse, who also now works. I downloaded all the drivers connected to my machine using the virtual keyboard, rebooted after each installed drivre, still does not.
    I also updated the BIOS, 1.3-1.5, still does not

    The strange part is that I can't access BIOS with F2, or sequence of starting using F12 at startup, navigate through the BIOS, so the keyboard works, but no longer works when Windows 7 has started.

    I tried to put all the defaults in the BIOS, no change.

    Help! >.< going="" crazy="" over="">

    Hello

    Have you installed additional drivers or tools for these external devices? If so you should remove, just check the software list in Control Panel.

    Normally the touchpad can be turned on/off with the FN + F9 key combination.

    In addition, it would be interesting to know what is happening on the factory settings. I mean the operating system preinstalled by Toshiba.

  • mouse and touch pad problem

    It seems that my mouse and touch pad have an auto-scroll function.  It just sucks.  How can I disable this auto scroll?

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand you want to turn off auto scroll features. I'll be happy to help you.

    What is the brand and model of your computer?

    We turn off the "Enable vertical scroll" option and check if it helps.

    We will, click Start, in the search type Control Panel, press ENTER. Double click mouse, mouse properties and uncheck 'enable vertical scrolling '.

    See also the site of computer manufacturer for the touchpad settings. Because the touch pad settings depends on the manufacturer of the touchpad.

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • Satellite U50T-to-10F - keyboard and touchpad MOMENTUM does not

    I have a Toshiba Satellite U50T-A-10F, who did the usual round off the coast and was updated last night won't however when I turned it on the wheel mouse and keyboard does not work I managed to get hold of because the touch screen still works, but nobody knows why it would update then?

    Tried phone support but only open from Monday to Friday, I took out of warranty extended thanks to God!

    According to the bulletin of Toshiba technical support document, the touchpad can be disabled only and using the function keys it should be possible to activate the touch pad once more.
    Touchpad doesn't work anymore after upgrading Windows

  • Qosmio F20: Question on tuner TV and Touch pad

    Hi guys,.

    This is the first time for me on the forum, I have questions about my Qosmio F20.

    1. I installed a Microsoft mouse wireless yesterday, and I noticed that the touch pad system tray icon and Touch and Go system tray icon disappeared! Could it be because that the replacement of a pointing device with another? I would like your help to recover the missing programs again.

    2 - I tried to connect the satellite receiver with the TV tuner and I managed to get a picture, but the image was all blue. Does anyone have an EXPLANATION for that? And can I fix it without going through dealers?

    Please, help me with my problems.

    Thank you.

    Hello

    1.) of course the 3rd party mouse driver could be a reason for a loss of Touch and Go system tray icon. If you wish, you can use the system restore which is part of the Win Xp operating system. This procedure should push you old driver and utility.

    (2.) trying to update the TV tuner driver. The latest version is 1.0.32.50526

  • Satellite A300D-11 s - keyboard and touchpad freezes

    Hello

    I have a lot of problems with my Satellite A300D-11 s (for the region of the Adriatic).

    I have Windows 7 Ultimate with installed all the drivers from the Toshiba site. Everything works perfectly... but...

    When I first time works laptop, can't initialize graphics driver, keyboard not working and touchpad is froozen. In this situation, I can use external USB mouse and keyboard, Internet (WLAN, LAN), Sound. When I reebot the system, Windows 7 loads and works perfectly and I can work 3-4 hours. After disabling laptop and put on 30 minutes, 1 hour or 6 hours, problem exists always again :(

    Then I reinstalled the system of zero, use, update to the latest drivers and issues is always present. I tried this 3 times, but I have no idea what to do. Sometimes when I close the lid of my laptop and later at the output of the keyboard and the touchpad of stand by are frozen.

    Laptop have guaranteed but last time, replaced service card motherboard and CPU. Laptop may be defective?

    Thnx and sorry for the gramatic mistakes

    Hello

    > graphic driver cannot initialize, keyboard is not working and touchpad is froozen. In this situation, I can use external USB mouse and keyboard, Internet (WLAN, LAN), Sound.
    For me, it sounds like that just internal peripheral input (keyboard and touchpad) don t work more and they need to be replaced.
    What do you think about this?

    You can contact your authorized service provider. They can exchange the two parts for you.
    Check this box!

    Regarding your display driver problem, you must update the driver and install the latest version of the BIOS.

  • Satellite A300 - 1 5: keyboard and touchpad not working

    I have problem with keyboard and touchpad. Laptop satellite A300 - 1 5

    I have Vista home premium and when I turn on the computer, I put password in the user box then my keyboard and the touchpad do not work.

    In the Bios my keyboard work but when Vista starts it doesn't have.

    How to solve this problem?

    Thank you!

    Hello

    First of all, please check the status of the device in Device Manager.
    Please check if the keyboard and touchpad are listed correctly without any yellow exclamation point.

    But you should try to reinstall the drivers again, even if the keyboard and the touchpad have been recognized correctly.
    In this case I recommend to remove the keyboard and the touchpad Device Manager, and then you must restart the computer once more.

    After Vista has restarted the two devices should be recognized again and should work.

    Please check this!

  • MacBook Pro swollen battery and touch pad don't slam

    My 2011 MacBook Pro has been inactive for 3 months and when I put it in the service of the touch pad will not work correctly.

    After finding the empty battery, I loaded for several hours and it took the charge.  3 days later, the load is always good.  the problem is that, while the cursor moves easily, the touchscreen function (enter) will not work.  The pad seems to be a little swollen as well.

    I was in a harsh climate in Saudi Arabia for a year and had a few touch pad issues with swelling of the battery.  When I returned in North America the problem disappeared.  Now the problem is back.

    I'd like suggestions on maintenance or replacement battery.

    Jaggerdog

    Hi there Jaggerdog,

    If I understand correctly, you want to know how to go about setting up of service for your MacBook Pro that has problems with the battery. Take a look at the Web Service Response Center page linked below, it describes the service options for your device in several countries.

    Apple - Support - Service Response Center

    Ciao.

  • Laptop HP keyboard and mouse pad display disabled in Vista

    The keyboard and the mouse pad on my HP laptop are no longer works. I have to use a USB keyboard and mouse that work very well. I can use the keboard bring my laptop out of fashion 'sleep', but that's all it will do. It will not type and capslock will not activate.

    In the Device Manager, this error appears in the device monitors the keyboard and mouse.

    A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

    The drivers for both are up to date and I tried to disable and allowing them, without success. Any suggestions on how to fix this?

    Hello

    Check with HP, their documentation online support and their forum as these could be
    disabled by methods are not not in Manager device and/or defective.

    HP support
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • Increase the memory in I MBR 13 '' end 2013

    My MacbookPro has a SSD 251 GB which is almost full, I have now 13 GB left. It will be fully this year if I continue to upload the Photos. My Photos are I-phone and camera and are stored in I-Cloud and 2 devices What choices do I have? More SSD? Move

  • Graphics card for A6313w

    I come from Apple TV and want to be able to watch HD streaming of Itunes. My monitor is HDCP, but my video card is not. Any suggestions on a PCI Express x 16 card for a 32-bit system with a 250 watt power supply. Not really wanting to upgrade the pow

  • My motherboard is broken or is she something else

    I have a pavilion p6310y that I'm trying to fix up. It begins with the blue hp screen with function keys. It then goes to a blackscreen saying things on safe mode or if I just want to start it normally. When I click on start windows normally it comes

  • How can I get the script to a Table?

    Hello worldGreetingsWe can get the script from the procedure, function, package, and trigger data dictionary see user_source.Is he see everything in the script for the Table? If not possible how to get the script for a Table?

  • Error serial number you provided is valid when installing Adobe Acrobat Pro XI

    Adobe Acrobat Pro XI problem installing - using the serial number valid the old deviceI tried several times to use a valid serial number to install Acrobat Pro XI on my new computer laptop.However, whenever I get a message error that serial number is