HP xw6200 without audio

Similar Questions

• Filming without audio

  Appliances digital cameras generally provides a way of filming without audio?  This would save memory, or is the audio component that is too small to make a difference?

  I own a Canon PowerShot SD1300 IS (IXUS 105 in North America), but I have a sneaking suspicion that the answer (either or not) apply to most digital cameras.

  The PowerShot 3 I've owned audio is automatically included for any normal shooting mode (maybe for ultra-fast frameworks for idle movies that it wasn't).  I just watched a few movies taken with SX280 (video with audio MP4 h264) and my 1300IS (Motion JPEG with PCM audio). In 3 movies, I checked that the audio component was only 1-2% of the total size of film.

• How to load the clip on the timeline without audio

  How to load a clip to the timeline without audio?

  Hello

  Open in the Source monitor, then click on and hold the video icon, drag the video only.

  

  Vinay

• 9.1 - multiple formats without audio update

  Since the last update. Oddly enough, I had to redo the link again many my video clips.

  However, I was invited the following audio error...

  

  MOV files, as well as several other formats (.mp4, .mpeg, .avi) read as a video only - it seems to omit the audio portion of video files?

  The strange thing is when I try to re - import the clips into my video project is only imported without audio.

  But if I slip and fall, it works.

  any ideas?

  Hello

  I tried to decipher what is happening with this issue; It seems to be very environmental. You can try the following:

  (1) delete all files cache and accelerator - CFA, PEK, IMS and files in the folder media Cache (CMPD extension). Do it with closed first, from the Explorer. The location of the file cache may vary if you have changed this preference, but by default are in C:\Users\username\AppData\Roaming\Adobe\Common.

  (2) rename your media folder containing files that fail to import.

  (3) open your project 9.0 original once again (not the one previously converted).

  Let us know your results.

  Colin

  First Pro EQ

• soundChannel behavior without audio driver

  Hello

  I don't know if it's AS3 or Air forum /FB4 I should ask this:

  I'm testing my application on cell phone look older without audio drivers and the problem is when I want to call the SoundChannel.stop () function. Well I don't know what the problem is, I only managed it draw this line of code that calls stop() and now I don't know what to do because there was no alert error or nothing. Code stops just at the level of this line.

  I don't even know if that's the problem with the audio driver.

  I tried to look in google for answers and I found that the play() function returns NULL when there is no drivers, but found nothing on function stop().

  Edit:

  I have prepared sample application:

  <?xml version="1.0" encoding="utf-8"?>
  <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009" 
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="init(event)">
    <mx:Canvas width="500" height="500">
    <mx:Text id="txt"/>
    <s:Button id="btn" label="stop" click="btnClick(event)" bottom="0"/>
    </mx:Canvas>
    <fx:Declarations>
    <!-- Place non-visual elements (e.g., services, value objects) here -->
    </fx:Declarations>
    <fx:Script>
    <![CDATA[
    import mx.events.FlexEvent;
    private var snd:Sound = new Sound;
    private var sndCtrl:SoundChannel = new SoundChannel;
  
  
    protected function init(event:FlexEvent):void
    {
    snd = new Sound;
    snd.addEventListener(Event.COMPLETE,sndLoaded);
    var url:URLRequest;
    url = new URLRequest("df1_fi1.wav");
    snd.load(url);
  
    }
  
    private function sndLoaded(e:Event):void {
    snd = e.target as Sound;
    sndCtrl = snd.play();
    }
  
    protected function btnClick(event:MouseEvent):void
    {
    txt.htmlText += "before stop <br>";
    sndCtrl.stop();
    txt.htmlText += "after stop <br>";
    }
  
    ]]>
    </fx:Script>
  </s:WindowedApplication>
  
  
  

  Use any sound in place "df1_fi1.wav", export, install, and lunch this app, then press the button. On the computer with the audio driver, you can see 'before' and 'after' text on screen. On portable unmanned audio, you can see only the text "before".

  OK, I managed to install Flash Builder on this old laptop and debug this application.

  Problem is that soundChannel is null, the system without audio drivers. So every time I run sndCtrl.stop () there is a deviation from a plant object and vacuum system.

  I just need to make exceptions, such as:

  If (sndCtrl) sndCtrl.stop ();

• give the user an option to use with audio or without audio

  How to give the user to use published.exe with no audio and audio options?

  If they want with audio just click audio or without audio

  IM using captivate 5.5

  Win 7

  There is a mute on the playback bar button.  All the user has to do is click here to disable audio.  If you have done the captioning text and it synchronized with the audio, it will always show even if the sound is muted.

• Question - export without Audio

  Together with Photoshop CS5 Extended.

  I opened a video clip that contains audio and audio plays in the timeline with the video.  Object converted to chip and the applied filter.  When I export the clip I see that there is no audio data.  The dialog box tells me there is no audio data and the exported video plays without audio.

  How to export the video changed to include the audio track?

  Failure is here:

  Object converted to chip and the applied filter.

  Audio export only works at the root level. Try to use a layer duplicated as the audio source...

  Mylenium

• Import MTS clips without audio

  I'm importing from an SD card, MTS clips. There are 212 of them, and for some reason, the last 20 or more are to come in without audio. I deleted and don't re-import of the camera itself and no luck, same thing (audio and video). Any ideas what I was doing, how to fix? I'm new to PP, first time production.
  
  Thanks, Ben

  PP CS4 v4.0

  Mac OS x 10.6.8

  Intel Core 2

  Do not copy the individual files on your hard drive... copy the entire folder that contains the file from your camera to your hard drive, so the 'metadata' are copied onto your computer, and then import the files in this folder from the hard drive

• desktop without audio

  New Office HP 500 410 t with WIN 8.1

  Connecting the speakers USB from my old computer (DELL), I think is analog.

  Then I tried a digital one, BOSTON BA735.

  In both cases without the audio.  ???  Help

  RTOUG wrote:

  New Office HP 500 410 t with WIN 8.1

  Connecting the speakers USB from my old computer (DELL), I think is analog.

  Then I tried a digital one, BOSTON BA735.

  In both cases without the audio.  ???  Help

  Difficult to get a card on this computer from HP.  Really stripped model, they don't have a lot of product specific information.

  Have you tried to connect the headphones to the headphone jack on the front of the computer?  See if you have found all the sounds in the headphones Jack.

  What you call "Speakers USB" is misleading.  The USB connection is only energy.   The sound signal comes from taking round green mini plug to the back of the computer.  You must use a mini cable plug round green your speakers or your monitor if it built in speakes.  IT IS THERE NO SOUND FROM THE USB PORT.

  Perhaps you have not connected the audio cable, I described.  It is possible that the rear audio input jack is disabled in the control panel.  Open Control Panel, click on sound and make sure that the rear audio input jack is not disabled.   If this is the case, turn it on.

  I hope this helps.

• First Pro CC without audio with BlackMagic 9.7.5

  Hello

  I have 2 DeckLink HD Extreme, I just installed the new CC Premiere via my CC and DV 9.7.5 account. Everything went right, but now I have no audio data within the application. In OS x, as in other applications such as QT or FCPX, I can hear the audio, but I noticed a lot of digital clips at random.

  Nor in the first audio CS6 works now! What the hell! I can't work!

  I am in contact with BlackMagic support, but after losing a lot of time, nothing has been resolved.

  I am attaching the screenshots of my configuration (don't mind the buffersize I tried all sizes).

  Any help is really appreciated.

  Thanks in advance.

  Piero

  MacPro 5.1, OSX 10.7.5, 24 GB, SSD RAID, 2xQuadro 4000

  

  

  

  Also posted this in my original thread, but I wanted to post here as well...

  OK, everyone, I am pleased to announce that, today, I could solve the problem... touch wood.

  I had a very detailed discussion with Charles Van Wink Adobe Wednesday where he could share with me and guide me through the new provision of the preferences pane.  He described the differences between the "Audio equipment" tab and the tab 'Read' and when specifically to set the settings on each tab.  While we were not able to solve the problem during the phone call, Charles was able to find out about how to troubleshoot better clean in a systematic way.

  According to the results, that I came in today, and how I came to a solution, my final decision on why I have problems for MY particular case is the following.  I think it boils down to a difference in the CC related preferences to the Decklink HD Extreme Card versus how CS6 treats the same preferences.  I mean, that's it.

  In CS6, I was able to have audio playback through my Decklink Card without any problems whatsoever, regardless of what type of sequence, I did.  Often, I would like to "a sequence of the clip" to make my settings of sequence corresponds to the clamp and reading has worked well.  If I do this in CC, the Decklink Card does not appear to love him and will not play nice.  Even if I chose the appropriate material and playback options, he still would not play audio.  But if I actually make a sequence of Blackmagic in CC, reading works suddenly.

  The mad is when I do work and then decide to create a no-blackmagic as a sequence control, reading would also work for this sequence... just not nearly as a reagent.

  So, after all this and weeks of troubleshooting, I decided that CC and Blackmagic really play together better when using Blackmagic sequence presets.  I'm sure this isn't news of Adobe or Blackmagic but CS6 did not seem to mind as much.  CC, for me at least, seems a little more strict.

  Thanks again for your help,

  Beautiful Leland

  Editor in Chief

  OKC, OK

• Clip AVI / WMP without audio / PPro CS5 no video...

  I have a clip AVI, when played in Windows Media Player shows video but not the audio. When I import the same clip in PPro CS5, it displays the audio file without video. I ran the clip via MediaInfo and got the following results:

  General
  Full name: F:\#lewis_wedding\back_close_up\CLIP0004. AVI
  Format: AVI
  Format/Info: Audio Video Interleave
  File size: 810 MiB
  Duration: 20 min 23 s
  Overall bitrate: 5 556 Kbps

  Video
  ID                               : 0
  Format: AVC
  Format/Info: Advanced Video Codec
  Format profile: [email protected]
  Parameters of the format, CABAC: Yes
  Parameters of the format, Reframes: 1 frame
  Parameters of the format, GOP: M = 1, N = 5
  Codec ID: H264
  Duration: 20 min 23 s
  Flow: 5 505 Kbps
  Width: 1 280 pixels
  Height: 720 pixels
  View picture format: 16:9
  Frame rate: 30.000 fps
  Color space: YUV
  The chroma subsampling: 4:2:0
  Color depth: 8 bit
  Scan type: Progressive
  /(pixel*Frame) bits: 0.199
  Stream size: 803 MiB (99%)

  Audio
  ID                               : 1
  Format: ADPCM
  Codec ID: 2
  Duration: 20 min 23 s
  Bit rate mode: Constant
  Sampling rate: 44.1 Kbps
  Channels: 1 channel
  Sampling rate: 11,025 KHz
  Color depth: 4 bits
  Stream size: 6.47 m (1%)
  Interleave, duration: 185 ms (5.54 video images)

  Am I missing a codec or something?    Creative Suite CS5 running Win 7 Pro

  You have the read set to Full resolution?

• Thin PC without Audio

  I have a lot of Hp dx2000mt towers I put embeded Thin PC from Microsoft, Windows 7 on. I have no sound on these machines, when before with XP I had audio. I downloaded the latest audio drivers I know a Slimdrivers free program. I tried to use HP driver. I even tried using using different versions of the drivers for the pc. The current audio driver located on all machines is Realtek AC 97 Audio 5.37 Version. When you cannot read an mp3 file, video from the internet, or on the system itself no sound.

  I would like to know if anyone else has the same problems. Thank you.

  Ok.

  I looked and looked and my suggestion would be to try to install automatically and if this fails, manually install the audio driver XP ADI support page and the driver of your PC.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=401821 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DPSG_I19912_103548%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  I couldn't find a Vista driver with the hardware ID for the audio chip in your PC.

  Here is a copy and paste of the audio driver XP installation information file...

  This shows the ID's material supported by this driver.

  [AnalogDevices]
  % * WDM_AC97AUD. DeviceDesc % = WDM_ODMA188, pci\ven_8086 & dev_24D5 & subsys_80B01043
  % * WDM_AC97AUD. DeviceDesc % = WDM_ODMA188, pci\ven_8086 & dev_24D5 & subsys_810D1043
  % * WDM_AC97AUD. DeviceDesc % = WDM_ODMSPDFN, pci\ven_8086 & dev_24D5 & subsys_90541509
  % * WDM_AC97AUD. DeviceDesc % = WDM_ODMSPDFN, pci\ven_8086 & dev_24D5 & subsys_92011509
  % * WDM_AC97AUD. DeviceDesc % = WDM_ODMSPDFK, pci\ven_8086 & dev_24D5 & subsys_75801462
  % * WDM_AC97AUD. DeviceDesc % = WDM_P4, pci\ven_8086 & dev_24D5 & subsys_00951071
  % * WDM_AC97AUD. DeviceDesc % = WDM_P42, pci\ven_8086 & dev_24D5 & subsys_10951071
  % * WDM_AC97AUD. DeviceDesc % = WDM_P42, pci\ven_8086 & dev_24D5 & subsys_20951071
  % * WDM_AC97AUD. DeviceDesc % = WDM_NR146, pci\ven_8086 & dev_24D5 & subsys_218114A4

  So, go ahead and run the file and if the driver installs, the great.  If it isn't...

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software, and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp25991. Make sure that the include subfolders is selected and see if the pilot goes like this.

• want to 750: hp envy 750 without audio

  To set up the new office and I have no sound... have not pregnant? It is said Bang & Olufsen on the tower...

  B & O set up audio, but you have to buy speakers to hear real audio system.

• LifeCam HD3000 - without audio

  Hello

  Can I install the Lifecam HD3000 on a mac?
  I tried it, but even if I have the photo there is no audio data.
  Can you please advise me what to do?
  Thank you.

  Hi Arsène,.

  Microsoft LifeCam HD-3000 is not supported for Mac OS from the link below.

  http://www.Microsoft.com/hardware/en-in/p/LifeCam-HD-3000#support

  I suggest to follow the steps below and we update on the State of the question.

  Troubleshooting: Webcams:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  For more information:

  Contact us:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Supported Microsoft mouse, keyboards, LifeChat, LifeCam & more:

  http://support.Microsoft.com/ph/7746?WA=wsignin1.0

  If the problem persists, then I suggest you to contact the Apple Support:

  http://www.Apple.com/support/Mac/

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• 435xps hdmi to tv without audio

  Dell xps 435 none there HDMI audio only cable pc to tv no audio not thanks dave

  Hello

  Thanks for posting in the Microsoft Community.

  It would be useful that you can answer these questions to help you further.

  1 Windows operating system is installed on your system?

  2. have you updated the drivers for the computer?

  In most scenarios, the problem has been resolved by putting the HDMI audio device as the audio device by default.

  Here is a link to the thread where Vaseem Ahmed, technical support engineer has provided steps to solve the problem in Windows 7.

  Windows 7 HDMI not sound on television.

  I hope this helps to solve the problem.

  If you need further assistance, please answer and we will be happy to help you.