HP1610-prayer every 5-6 lines

Similar Questions

• HP Officejet Pro L7580 (printer) printing faded every 3-4 lines

  My printer is less than 4 years. Recently, each page that print has every little faded lines. I have all new ink cartridges in the printer and have used the printer cleaning paper Laser buit several times the problem still exists. Any ideas? I don't want another printer.

  Hello

  Please try to make a copy of a document or a photo color.

  Let me know if the problem still persists.

• TableView: How to show that a line of a cell contains a multi-line String using «...» »

  Hello

  I am currently working with a TableView. While I'm quite fine with the behavior of the component displaying «...» "at the end of a string that would be otherwise too long, I don't know a way to do the same thing when a channel is on more than one line...

  I already understood how to specify the height of a line by using "setFixedCellSize" so that the lines are always a high line. However, I find it embarrassing not to show «...» "to inform the user that there is more than one line of text that could let her think that there is nothing more than a line.

  Is there a way to solve the problem other that manually add «...» "every time a line separator is located?

  Thanks in advance,

  Xavier G.

  I managed to find a way to fix my problem by using the cellFactory and substituting updateItem (the called function every time the cell must be returned)

  @Override

  protected void updateItem (Object, object, boolean selected)

  {

  super.updateItem (object, selected);

  If (item is nothing)

  {

  setGraphic (null);

  setText (null);

  }

  on the other

  {

  setText (object.toString().split("\\n|\\r")) [0] + '... ») ; This line does it all

  }

  }

  }

  I post this response to the case wherever it someone else might save time

  I'm not sure it's the cleaner way to solve the problem however.

• Press the button on parallel port signal to trigger a process

  I just need to connect a pushbutton on the parallel port to set it as a signal of the beginning of a process.

  When the button is pressed, labview runs a process.

  Kindly help me how to do this, the prayer of wiring

  Lines of data to use as input Some parallel ports can be configured for use as inputs data lines. This depends a lot on how the manufacturer has designed the parallel port. With some models the data lines can be read in the same way that we read the lines of control, leading them to logic high, so they will take the value of an external signal. However, most parallel ports require that you set the bit of sense for entry. It is bit 5 of the control register (base + 2). If the port is capable of it, setting the high bit for effect to sort of lines-State so it can be driven on the outside. Sometimes it is also necessary activate the 6 bit high or low. However, it is noted that some manufacturers actually block those bits so that the software can edit them. An example is shown below in Figure 7.

• Printer (no new or new to me) does not properly

  My printer prints every other dark line (normal) and the opposing lines very faded. Added a new black print cartridge and it didn't fix it. Any help would be appreciated.

  What is the model of the printer? If the printer has a front end/LCD Panel, usually it is under Configuration of him-> the menu Tools, if the printer does not have a façade, and it's a printer hp, with the hp driver installed, it is one of the functions of the software.

• Can not get the focus within a HorizontalFieldManager

  Hello

  I have several HFM in an optimization of resources.

  Each HFM contains a RichTextField. I want to do is make a button appear near the RichTextField in the HFM every time a line is "concentrated" (i.e. when the cursor is on a single line) and make them disappear when I change line (to make it appear on the ranks.

  What I do is the following:

  HorizontalFieldManager row = new HorizontalFieldManager(HorizontalFieldManager.USE_ALL_WIDTH) {                               protected void onUnfocus() {                    this.deleteRange(1, 1);                }                                protected void onFocus(int direction) {                    ButtonField getDetailsButton = new ButtonField("See details", Field.FOCUSABLE);                    this.add(getDetailsButton);                };                            RichTextField cNameLabel = new RichTextField("test", Field.FOCUSABLE | Field.FIELD_VCENTER | RichTextField.USE_TEXT_WIDTH);                        row.add(cNameLabel);            this.vfm.add(row);
  

  I get the Visual effect that I wanted (the button appears on the line, when I focus it and dispear when I leave) but the problem is that I can't get the focus on my button or textfield object. There is no cursor. And if I try to do it by programming (mybutton.setFocus () in the OnFocus() function) I get a nullpointerexception.

  No idea what's wrong? Thank you

  As far as I know that you can't focus on an area that is managed by the field that is active. An easier way to do this can be with a nullfield active within your HFM and use instead.

• Select the top row of ADF Table default

  jdev 11.1.1. 6

  In my application, I have a fall towards the bass and based on the value, select from the drop-down list on the af: table is filled (using the drop-down list vcl property, I'm populating the VO based on which the table is).

  The table has "selectionListener" defined in a method at the bean so that every time a line is selected some operation.

  < af:table value = "#{bindings." RoleVO1.collectionModel}.

  var = "row" rows = "#{bindings." RoleVO1.rangeSize}"width ="500 ".

  "partialTriggers =": soc1: cb1: cb2.

  emptyText = "#{bindings." RoleVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." RoleVO1.rangeSize}.

  rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " RoleVO1.collectionModel.selectedRow}.

  selectionListener = "#{CRoleARoleBean.roleTableSelection} '"

  rowSelection = "single" id = "t1".

  editingMode = "clickToEdit."

  Binding = "#{CRoleARoleBean.roleTable}" >

  I have here a certain way, I can make the top row of the selected table and trigger the selectionListener by programming the dropdown each time value is bud?

  Please notify

  by selecting the default line can be obtained by adding after the vcl in drop-down list:

  this.roleTable.setRowIndex (1);

  RowKeySet ch = this.roleTable.getSelectedRowKeys ();

  PS. Clear();

  PS. Add (this.roleTable.getRowKey ());

  AdfFacesContext.getCurrentInstance () .addPartialTarget (this.roleTable);

  Make sure the displayRow selected = is defined in the table property

• What does this query? Am I wrong?

  Select AVG (NTC)

  de)

  Select DriverID, cast (COUNT (9) as float) cnt

  of myTEST2 one

  where exists (select 1 from myTEST2

  where DriverID = a.DriverID

  and layout = "guilty".

  )

  DriverID group

  ) x

  I think that his calculation of the average number of people with the provision of a culprit.

  Hello

  If a subquery in a WHERE clause clause refers to a value of the Super-requete, then the subquery is called a correlated subquery, and it runs a separate period for each line of the great query of.  This is the query you posted, reformatted to make it more understandable:

  Select AVG (NTC)

  de)

  Select DriverID

  , NTC cast (COUNT (9) as float)

  of myTEST2 - Alias defined here

  where is (-beginning of correlated subquery)

  Select 1

  of myTEST2

  where DriverID = a.DriverID - Alias a used here

  and layout = "guilty".

  ) - End of subquery to correlated

  DriverID group

  ) x

  ;

  The average subquery (i.e. the query with the GROUP BY clause) has a WHERE clause, so every time a line is located in the table mytest2, that where clause gets evaluated and the results of this condtion say whether the line should be included or not.  Oracle has found a line with driverid = 1 in the table mytest2 and then decides if it will use this line.  What does exactly to decide?  He runs the EXISTS subquery and sees if the subquery produces all lines or not.  When it ends with the line that is driverid = 1, there may be a lines with driverid = 2, rerun the query EXISTS Tahina, see if the subquery produces all lines and use it to decide if the line is stored.  The computer could pick the other row with driverid = 2 and repeat the process.

  Using a table alias told Oracle that the subquery EXISTS is a correlated subquery and it also says there that the values of the Super-requete to use.  Therefore, in the scenario I described earlier, when the Super-requete is to decide whether to keep the line with driverid = 1, it executes the equivalent of this EXISTS subquery:

  Select 1

  of myTEST2

  where DriverID = 1 - because a.DriverID = 1

  and layout = "guilty".

  Then, when he is to decide whether to include one of the lines with driverid = 2, it executes the equivalent of

  Select 1

  of myTEST2

  where DriverID = 2 - because a.DriverID = 2

  and layout = "guilty".

  There is nothing magical about the alias one.  This is an identifier arbitrariness that is defined in the Super-requete of and can be used in the subquery.  You need some type of alias in this case because the EXISTS subquery can be based on the exact same table that its users of subquery, which is mytest2.  Using your 2 copies of the same table, similar to the way you have 2 copies of the same book, open on different pages.  If you do not have an alias, no column name could make reference to the copy of mytest2 in the subquery EXISTS, or to the copy used in the Super request and by default is that it means the copy in the subquery.

• Problem with af:tableSelectOne / af:commandButton

  Hello
  
  I have an af:tableSelectOne and an af:commandButton associated with 'Confirm' who has the action is the processLink() method in the bean support.
  
  For the first page of the results of the table, everything works as expected, however, for no matter what later results page in the table by selecting a row and clicking on 'Confirm' submits the page but does not call processLink(), that is to say don't hit my breakpoint. After the presentation, by clicking on 'Confirm' hits processLink().
  
  Why do I need to click the button twice to hit his action?
  
  Also, if I put AutoSubmit true on af: tableSelectOne it solved the problem, but has the undesirable side effect of submitting the page every time a line is selected.
  
  Any ideas?
  
  Please let me know if more information is needed.
  
  Thank you.

  Hello

  No, it's good because that's where the button belongs to ;-)

  Frank

• Printer to skip every third line

  My Deskjet 2050j skip every third or fifth line based on the document that I print. I've tried all sorts of cleaning of the printer have options, I refilled the cartridge, tried printing in three different computers and still have the same problem. Then I tried to print a horizontal page with the same text, I had no problem, then tried to print a drawing in black and white, I did and it was no problem. I only get this problem when printing text in a page in a vertical way.
  
  Info:
  Model: Deskjet 2050 all-in-One J510a

  Firmwre version: SLM2FN1006BR

  the printer software version: 022.050.231.000
  driver version: 04.43.07.853

  This is due to a problem of electric contact between yout printer and cartridge
  Try cleaning the contacts of the cartridge with a lint free tissue. (A folded dollar bill works well).

• I just got my computer from Vista to Windows7... Problems with the sites game requiring shockwave remains... Get knocked off line every few minutes... What can I do to stop this? __

  I have problems since I changed my computer from vista to windows7... Sites game requiring shockwave remains... I get knocked off line every few minutes... Why? How can I stop this?
  

  Hot4Lefteris,
  The first thing I would say (if you have not already done) is to ensure that you have the latest version of Shockwave installed.  If you have still a problem, I would like to run IE without Add-ons and then put only the module Shockwave Player and the test.  Also, follow the other steps listed here and post back with the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• C309g C309g-m: print greenish lines every 1/2 "when printing in color.

  I did clean-up operation head repeatedly.   The results are still show horizontal lines about every 1/2 ".

  Note: Board of Directors doesn't give me an option to select printer problems.

  How long the printer has sat without print through it? It is generally recommended to print at least a page of color, a month or two of any inkjet printer, because even with the measures of head cleaning, it is still possible for the ink to dry up permanently inside the micro-buse jets.

  You may be able to get a head cleaning solution or possibly substitute some acetone and try a cleaning manual print head throughout, but I wanted to wait other opinions who are familiar with your specific model printer first for more tips.

  The worst cases are you may need a new Assembly of the print head, which is not terribly expensive for this model.

  Good luck though, honestly, I hate printers, but still sometimes I correct when they come my way.

• have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Also in first CC transitions they are like those on Adobe Premiere CS6 as much as

  have Adobe first CC I pay for it every month I just downloaded... What do I have to pay for the film Pat because all their transitions have black lines on it... Transitions in first CC are also like those on Adobe Premiere CS6 can get 1 transition and then take multiple options as only a transitional option when I take the transmission of action... for example break glass I can also do several different transitions with in the glass break action transition

  Hi Willkutlass,

  I'm sorry but don't know what 'pat film' is. If it is a 3rd party effect/transition, you may have to pay for it.

  And the video transitions in Premiere Pro CS6 and first Pro CC are the same.

  Only difference, several transitions in CS6.

  

  Answer please, if you would like more information.

  Thank you

  Ilyes Singh

• Print every word in the new line for a space in a string

  Hi all

  I would print every word in the new line, if there is a space in the string.

  Is there a better way using regexp?

  declare

  number of v_count;

  v_text varchar2 (1000): = 'Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - Production | " ';

  v_single_text varchar2 (1000);

  number of v_space_pos;

  Start

  Select regexp_count (v_text,' ') in double v_count;

  While v_count > 0

  loop

  v_space_pos: = instr (v_text,' ');

  v_single_text: = substr(v_text,1,v_space_pos-1);

  dbms_output.put_line (v_single_text);

  v_text: = substr (v_text, v_space_pos + 1);

  v_count: = v_count-1;

  end loop;

  end;

  Thank you

  Rambeau

  HI - try as

  with t as (select 'Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - Production' |) "" double str)

  Select regexp_substr (str,'[^] +', 1, level)

  t

  connect by level<=regexp_count(str,'[^>

• Adobe Flash makes diagonal lines, every time I try to draw draw

  I use an intuos pen and touch small, and every time I was trying to get it made a line and it gives him a slight offput

  Hello

  We animate CC 2015 just came out and this problem has been fixed in this version.

  If you please disconnect and connect to the creative cloud desktop application to view immediately the CC animate then update/install the latest version of animate CC (15.1.0.210)

  Kind regards

  Mukesh