Printer to skip every third line

Similar Questions

• My printer is skip lines to print documents from my pc but the coppying works

  As the topic says my printer is skip lines when I try to print the document from my pc, but coppying documents while the printer is not connected to the pc works perfectly so I would appreciate your help to solve my problem.

  P.S. I tried Kaleidoscope twice but it does no effect whatsoever, I am using hp Deskjet 2050 J510 series

  This is not usually a symptom of software or programs.  If the ink levels are not accurate in the software of the printer it still would not affect the print quality of which is (the technology is unpredictable sometimes though).

  Try a hard reset of the printer, although it is still on and shut down the computer.  When all the powers on back, do a test print.  If printing still only all other lines, follow the document below from four Solution.  Solution Six shows you how to print a test page which will give you a more accurate account of the ink levels.  Once that prints, please tell me what it displays in the form of ink levels and if it shows any other signs of defects.

  -Solving print quality problems.

  If none of the suggestions has improved, how long is the USB cord and how old is it?

• CN460A: ADF print copy with a thin line from top to bottom?

  ADF print copy with a thin line from top to bottom of page.  fine prints from the PC to the printer...

  This was probably caused by a specification on the thin glass used for scanning form the ADF.  See here for more information on cleaning this area to solve printing line when using the ADF.

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Lost printer by default, every morning

  I lose my printer by default, every morning. Other workstations in our network have also the same problem. Mine is a local printer (USB) and others are network printers. Very annoying! Usually there was an update from one day to the next. Other times, it is! Systems are left running overnight. (Maybe 5% of the time, the default printer remains as default value).

  Hi Sandy Craig,

  Welcome to Microsoft answers forums!

  If you want a default printer is not enabled, windows by default to the first it finds after logon.

  Make sure that the printer is not turned off before starting the computer.

  I suggest you try the following steps:

  
  Step 1: install the latest windows updates

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. in the left pane, click Find updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Step 2: Try to reset the printer spooler

  Run the Fixit provided in the link below

  http://support.Microsoft.com/kb/2000007

  () This article allows to solve printing problems, you can still run the fixit provided in the link to reset the printer spooler)

   

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Replace every third comma with |

  Hi all
  
  My requirement is like this:

  In a column i need to replace every third comma(,) with || symbol.
  
  eg:
  1,Animesh,1234,2,Tripathi,4321,3,Oracle,2345.....(and so on)
  
  Desired output:
  1,Animesh,1234||2,Tripathi,4321||3,Oracle,2345....

  Please help me.
  -
  Concerning
  Animesh
  
  Published by: Animesh Tripathi on December 11, 2012 02:22

  Hi Anne,.

  Try using the regex.
  Try the code below.

  SET SERVEROUTPUT ON
  DECLARE
  v_file VARCHAR2(100) :=  '1,Animesh,1234,2,Tripathi,4321,3,Oracle,2345';
    v_file1 VARCHAR2(100);
  BEGIN
    SELECT REGEXP_REPLACE (v_file, '(([^,]*,){2}[^,]*)(,)', '\1||')
    INTO v_file1
    FROM DUAL;
    DBMS_OUTPUT.PUT_LINE(v_file1);
  END;
  

  I found above solution of one of the thread.

  You can find some details on regex_replace below given link.
  http://docs.Oracle.com/CD/B19306_01/server.102/b14200/functions130.htm

  Kind regards
  Jitendra

• printer of skip lines

  When printing, the machine skips lines or only prints the top part of the letters.

  Hello

  ·          What is the version of the operating system installed on your computer?

  ·          What do you see in the preview options before printing?

  Try the steps in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Also, try to change the settings of the printer and check if that helps.

  Hope that information was useful

• every 3rd line is missing when you print the document Windows

  Photosmart C4280 all-in-one.

  Windows 03

  new ink cartridges filled

  Looks like you may need to do some cleaning.  Try the procedure described in this document to clarify the problem.  Let me know what happens.

• Photosmart C6180 / Mac / Word - trouble printing on paper by a line

  I made it every Christmas for years - print a newsletter on paper by a line purchased in-store. Always worked well, until this year. Paper this year has a darker border than in previous years. The printer offsets the output to the bottom of the page that is equal to the dark border (as its only records the leading edge of the page when he sees the light of colorful paper). Everything works fine when I print the white paper - i.e., no offset to the bottom of the printed output.

  Any thoughts on how to solve this problem? So far, I have lost about 15 leaves try different settings in Word.

  Brian

  Printing from Word 2008 for Mac

  Well Yes, the sensor captures the darkness into the light and call him to some predetermined number.  If your border is located on the margin, it will record is nothing or paper rather randomly.

  Lesson - choosing a lighter border next year

• How to print 1 page for each line of the numbers worksheet

  Hello... I am trying to print reports of year-end per person and number.

  Is it possible in number to print 1 page for each row of a spreadsheet of numbers?

  Or suggestions?

  Thank you.

  Hi cm,

  This looks like a work of fusion and mailing.

  The merge document would create in Pages, and the cells of merger on this document référenceriez cells in the table in the document numbers.

  See the documentation Pages (on the Help menu) for instructions on the conduct of merger and mailing.

  To do this in only numbers, you would need to put in place a 'table of declaration' on a separate sheet (in the same document as the table containing information) which would accept a customer number (or other key ID for each individual) then use it to determine the line of the main table to retrieve information about this pattern.

  A more precise answer requires a more specific desription of your table structure and the desired form of the instruction to take.

  Kind regards

  Barry

• OfficeJet 6500 intermittently does not print half of the last line in the lower doc

  Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

  Try that and see if it helps the question:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

• HP 2600n prints with a blue vertical line on the sides

  There is a powder blue line appearing on my paper when I print. This vertical line appears on the left side of all my papers. I opened the front to find coverage that revolves around the rollers had what looked like to dry ink on this subject. I wiped it out and for one or two pages no. or very weak lines appeared. They are back.

  Help!

  Hi ellettrhi,

  ·         Since when are you facing this problem?

  ·         Remember to make changes?

  It looks like a hardware issue to me. However, try the following.

  You can view the following HP help guide and see if it helps.

  Print the HP Color LaserJet 2600n printer

  See also:

  Solve a HP Color LaserJet 2600n printer problem

  For more help, you can contact HP.

• everytime I go to print it shows "waiting in line. have shed jobs, turned comp. off past still

  Just added a monitor flat screen.  Print jobs, they are in the queue, have demolished and tried again.  Turned and on computer nothing changing.

  Printing will remove not print queued jobs      (Courtesy of Jose Ibarra)

   

  You cannot manually remove the afflicted printing when the Print Spooler Service is running.

  If you have jobs stuck in your print queue that you cannot delete (for some reason any), you can just delete them manually, but you must first stop the Print Spooler Service, the button delete print jobs and restart the Print Spooler Service.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder or copy / paste the following line into the start, run dialog box and click OK to open the folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and look in the Services applet again to check that the Print Spooler Service restarts automatically on reboot (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• HP Officejet Pro L7590 all-in: HP officejet Pro L7590 prints 1/2 of the line of text on several lines of the document

  I received an email for the diagnosis of the printer and I was prompted to install the updated drivers and I did it and now when I print the test page, I get several lines of text that displays only the top or the bottom 1/2 letters across the page, I printed a self-test diagnostic Page and printed everything in pink , but it does not print 1/2 letters across the page as a test page, then I printed a page of print quality and it did the same as the test page and it does the same thing as the test page, then I tried calibrate spacing of thought which may fix the problem but does not , what can I do?

  Irven

  Hi mmcmret8,

  Thank you for your answer! It is possible that the print heads may need to be changed, at this point, I would recommend to you please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!