HP2000 2120TU: DVD player eject automatically. HP2000-2120TU

Similar Questions

• IdeaCenter A600 DVD player eject disks

  This problem started some time. The DVD drive would eject randomly on some discs while he played the others. Lately, the frequency has now increased to a point where each disc is ejected out. The system takes in the disk, behaves as if it is something for a short while treatment and then the disc ejects.

  Help, please.

  Edited the previous post... Sorry no video

  Device Manager in Control Panel to determine the current model of the DVD player.

  Mine has a Blu - Ray player so yes!

  And here's one:

  http://www.Newegg.com/product/product.aspx?item=N82E16827118070

  You have to remove the bezel first, but a Sony was in the one I had...

• Satellite Pro L500 - DVD player eject when I put in any disc space or used

  When I put a cd/dvd virgins or used original or copies, ejects all the time
  pilot is underway
  in peripheral said properies works well
  How can I fix it?

  Please help me solve this problem, as it happened is that after 2 days of my warranty expires [1 year]

  Can you please explain what it more detailed?
  I mean when you close it is ODD that happens immediately or after some players starting?
  Is there a reaction of ODD? ODD tries to read the disc?

• drive DVD - auto eject tray

  Hello. I had this problem for two weeks. While working on my laptop, the DVD tray ejects automatically out. There is no disk/cd player. And it happens randomly. I tried to reinstall the storage driver, but it worked as well. Please help me with an effective solution.

  Hi Samadhi,

  Welcome to the forums of Lenovo.

  As per the request, we understand that you are facing problem with auto tray to eject DVD drive in your laptop.

  Please start the system BIOS and check for the issue and also trying to boot into safe mode and check the number.

  Check if the drive is installed. Also try reinstalling the driver and check the issue. Please share the model number we can provide the link to the driver.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin.S

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Apple dvd player will not eject a disc, does not show in the devices

  I'm on El Capitan, the player has played other discs, this disc does not appear

  There is no manual of the dvd drive eject

  drive does not appear in the devices

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  How the disk by force ejecting

  Mac Mini

  How to eject a defective DVD?

• accidentally ejected DVD player

  Hi, in the mist of the SAG in the afternoon, I thought I should 'eject' DVD player as you would with a USB key.  Of course, it wasn't the thing to do, and now I can't read whatever it is the DVD drive out of service.

  What should I do?  I can not find the device in the Device Manager either.  I use Windows 7.

  Thank you.

  Cindy

  Hello Cindy,.

  I'll assume you have a laptop.  Did you try to unplug your DVD player and in reconnecting it back?  A restart should fix the problem.

• On Windows 7, by pressing the eject button on the DVD player sometimes causes the monitors to twinkle

  My PC works fine for just about everything, except when I need to pop in a CD or DVD. It seems random, but when I hit the eject button on the DVD player, my screens sometimes twinkle. It happens about once every 5 times as the button eject. I'm running a dual monitor, with a monitor on a DVI input and the other on a HDMI input. Both monitors sparkle.

  The only things I can think of that can cause the problem are of my diet or my graphics card. My PC has never stopped on me during other operations, including executing some more processor intensive tasks. This seems to be a problem with my graphics card, but why my graphics card would randomly hitting the eject button?

  Windows 7 Enterprise SP1 (64-bit)
  Intel Core i5-2400 s Sandy Bridge 2.5 GHz (3.3 GHz Turbo Boost) LGA 1155 65W Quad - Core Desktop Processor Intel HD Graphics 2000 BX80623I52400S
  G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBRL
  ASUS black drive Blu - ray SATA model BC-12B1ST/BLK/B/AS - OEM
  ASUS P8H67-M PRO/CSM (REV 3.0) LGA 1155 Intel H67 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard
  XIGMATEK NRP - PC series ACXTNRP-PC402 400W ATX12V Ver.2.3 80 PLUS BRONZE certified Active PFC power supply

  I found the solution to my problem of graphics. Wow, really?

  So after the video driver updated, he set a maximum resolution on my HDMI output to 1600 x 900. That's if access you the resolution settings through the control panel > display > adjust resolution. Is not that how most people set the resolution?

  The update of the driver has replaced the max resolution by default setting, but it can be given via Intel display control panel (no was not yet aware, I had such a control panel). This control panel option is available for the Intel graphics controller hardware. To set the resolution, right click on the desktop and select "graphics properties." Select 'Advanced Mode', and then configure the resolution 1920 x 1080. Once the parameter is committed through this control panel, the Windows 7 Control Panel settings to work as you would expect, and the monitor is the 1080 p display.

  It is delayed. Pardon my French.

  Well, at least now I'm back where I started, IE still has the problem with the eject button causing the dual display to flicker. It happened only twice since the update of the video driver, then perhaps that these events were flukes?

• How do I re - install my Photoshop CS3?  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.  How can I I re - install?

  How do I re - install my Photoshop CS3?

  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.

  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• my DVD player does not start automatically

  When you insert a cd or a dvd in my DVD player it starts to run atomatic.  You can see some sort of indication on the screen but it never start.

  Hi ffred22

  
  You can check if the steps provided in the below Microsoft article assist solve you the problem-

  http://support.Microsoft.com/kb/330135

   

  I hope this helps.

• bk 2011 pro Mac dvd player spits out dvd

  I have a 15 inch 2011 mac book pro. The dvd player does not work. When you insert a dvd into the computer, the computer acts like it's going to run it, but then he spits. She also shows an error message of the dvd drive on the launch pad. I use the dvd player / cd player a lot. Help, please.

  Hey glerouxwende,

  Thank you for being a part of the communities of Apple Support.

  I understand from your post that your MacBook Pro is not mounting dics and is just spit them back.  It's probably what is originally an error of the DVD player.  To help solve this problem, I would like to you please follow the steps below:
  

  Accepts discs, but they do not install or are ejected automatically

  1. Make sure that the drive is not placed in reverse. The aluminum case must be upward as shown in section 1.
  2. Check the surface of the disc for scratches and dirt, as these things can prevent the disk on the desktop.
  3. Connect the SuperDrive for MacBook Air drive directly to the USB port of the computer instead a USB hub.
  4. Reset the controller management system (SCM).
  5. Make sure that your drive can read the disc type. The System Profiler or an Information system can provide additional information on the subject of what is supported by your computer media.
     • OS X 10.6 Snow Leopard or earlier: Open Apple System Profiler by choosing "about this Mac" from the Apple () menu. Then, click on details.
     • OS X Lion v10.7 and later: click the Apple () menu and hold down the Option key. Select system information in the menu.
  6. If the disc continues to not be recognized, Contact Apple or an provider of services authorized Appleor make an appointment with a Store Apple Store.

  Get help with the SuperDrive slot on your Mac computer loading

  Take care.

• Equium A200 CD/DVD player - 26 d keeps opening by itself

  Starting from my laptop, the dvd player automatically opens and it again whenever I close. Someone else met this, or know how I can stop this?

  Hmm. I m not very good but looks a bit like a hardware problem.
  In my case, the CD/DVD drive is ejected until a procedure of engraving was finished. This is normal behavior

  But in your case the CD/DVD drive does not eject automatically...

• Windows DVD Maker will not play on the TV DVD player

  I have Windows Vista, and Windows Movie Maker to make a movie. I've published using Windows DVD Maker. I've made several copies and sent to various members of my family. While I was able to watch them when I tested them on my TV dvd player, none of my family members are able to watch their copies on their dvd players. In addition, when I insert the dvd in my computer's dvd player, it won't play either. How can I fix?

  Thank you. What I did just check "ffdshow" configuration and found that the codec for mp2 was disabled, so I let him. Now when I load the dvd into my computer it starts automatically.

  Now, my question is that I have to burn the new dvd for my family, so they can watch on their dvd player TV? Are their other codecs apart from that I have activated that must be adjusted so that DVDs can be found on other dvd players?

  ======================================
  You didn't say if you have a folder VIDEO_TS on the DVD...

  OK... you say you can play DVDs on your freestanding
  DVD player and on your computer. Startups that appears
  DVDs are fine and the problems of members of your family
  need to be cleared up on their end.

  One thing I would try would be to publish the project as a
  .wmv movie file in a folder on my hard drive. Then I'd
  the following freeware to create a video DVD. There are
  a small chance that it would work better for you.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• door dvd CD ejects well not after that I installed adobe photoshop

  I installed adobe photoshop on my laptop and now in the CD door does not open when I hit the eject botton.

  Hello

  1. What is the number of brand and model of CD/DVD drive?

  I suggest you to try the steps below and check if it helps.

   Try to uninstall and reinstall the driver DVD in Device Manager.

  a. type devmgmt.msc in the search box start and press ENTER.

  (b) in Device Manager, expand DVD player.

  d. click on uninstall.

  e. restart the computer.

  Pilots should settle automatically after the computer restarts.

  You can also check the manufacturer for an updated driver and install the latest version. See the guidance below mentioned link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Hope this information is useful.

• My inner smartdrive dvd player won't read DVDs more.  I have updated to Snow Leopard in Yosemite.

  I am currently using OS X Yosemite 10.10.5.  I bought in 2009 iMac with Snow Leopard and have to Lion then updated my current operating system.  The internal dvd player has worked with much fussing, (insert the disc - closing - turn after a wait - by pushing the drive when he jumped on reboot).  If I had the chance after a few hours, the video disc show up on my desk.  When this happened, I was opening the dvd player that was in the Finder and the disc would play. I also tried to open the dvd first player and then insert the disc.  That no longer works.  Yesterday, only it just stop working.  The reader still takes dvd and swirls and click as before but then ejects the dvd. Repeatedly stop and restart is no longer works.  I make sure that the dvd be clean before I use it and have tried many different DVDs without success.  I think it's a software issue.  Does anyone have an idea/instructions a nearly dead grandmother brain that can follow to update or redate back to original factory setting to help this poor Smartdrive not so smart?

  I have no TV, only my computer and phone at low prices.  I need to watch that my library borrowed from the dvd.

  Thank you.

  Try a cleaning CD/DVD

  You can also try to clean by:

  How to clean a Superdrive DVD using a credit card!

  I suspect the optical drive has failed. My 2009 Mac Mini could not shoot with same symptom 4 years ago.

  To confirm a drive failure, insert a Snow Leopard installation DVD and try to start with the C key.

  If this isn't the case, they drive could not be started.

  I would just get an external optical drive, one powered with an AC adapter. The Superdrive Apple USB does not work without a hack.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of Intel iMac or another appropriate forum.