HP2000: HP 2000 display black but the screen showing all

Similar Questions

• When I start my computer, I connect by entering my password but the screen shows just the loading circle until I have turn off the power and turn the computer back on

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.

  Hi Greg,.

  ·         Have you checked the problem in safe mode?

  ·         What version of Windows operating system is installed on the computer?

  Try the following.

  Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

  Start your computer in safe mode

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• B210 in paper jam printer there is no paper stuck in the printer, but the screen shows paper jam

  Paper jammed paper but screen says paper jam jam preformed the resolution of problems and no resilt

  Hello

  Have you tried the steps outlined in this article. Give them a shot and tell us if it helps.

  Good luck!

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.

• After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

  After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

  Hello

  1. what operating system is installed on your computer?
  2. is it works much earlier?
  3. don't you make changes before the problem?

  Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your display drivers and check if the problem persists.

  Step 2:

  Reduce hardware acceleration and check.
   
  a. click the Start button, Control Panel.
  b. now, select appearance and personalization. under display, select adjust screen resolution.
  c. now, select adjust the resolution.
  d. click Advanced settings.
  e. now, click the Troubleshooting tab, and select the change settings button.
  f. in the Security dialog box, click on continue.
  g. move the hardware acceleration slider to the third notch.
  h. click OK.
  i. restart Windows.

  Step 3:

  If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.

• tx2550ee starts but the screen is black after some time

  Hello

  I have pavilion tx2550ee and for a month only, it displays strange problem

  the problem:

  some time after reboot that he didn't watch anything, but windows is loaded and I hear the sound and everything is ok, but since the boot until windows is loaded, the screen is black I try to change the battery, working directly with the adapter, but nothing has changed! the screen is always black

  I leave a few time approx. 30 min it works and the display shows each thing and its ok!

  I don't know why I should leave some time at the screen to work?

  In brief

  the Tablet is booting and windows is loaded but the screen is black but after 30 minutes, it works well

  
  

  any idea?

  Thanks in advance.

  For this device, the BIOS has been certified for Windows 7 and Windows Vista only. (If you should be able to Flash the BIOS on Windows XP too, I would not recommed it).

• 32L3441DG - bright green but the screen remains black

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  

  Posted by Patrick p
  

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  Hello, I have the same problem.
  I can hear TV-Programm, but the screen remains black.
  Uwe,

• Satellite X 200 - 15 K power on but the screen is black

  Hello

  I have Toshiba Satellite X 200-15 K, two days ago, I have problem with screen, the screen I have noise, I think it's the same error in my display driver and I have stop near windows xp and try to after 1 min, but the screen has more noise when the startup boot image and I stop by button / stop on laptop.

  Then do what I ve tried again to turn on my laptop but on the screen, I see only artifacts (same squadrons of colors) and after that, my laptop can not work, I tried to power on him but I only power led and HDD light works only 5 sec and after off the coast, and the cooler works 5 sec too and after offshore.

  I tried to remove the battery and the RAM and the wireless and all that I can :), but nothing happens, but when I try to power without RAM I see on power light beep two red and two yellow (IE my motherboard work).

  Maybe it can help me. I think I have dead motherboard.
  And for me, it is interesting that someone may have similar problems.

  Thank you.

  P.S Sorry for my English :)

  Hello

  Let's summary.
  You had a few artifacts on the screen, and now, you are not able to start the unit.
  Nothing appears on the screen; Neither the Toshiba start screen appears is good?

  Hmm seems material issue I m thinking about GPU (graphics chip).
  What do you think of this?

  If it's really a problem of graphics card, then you will need to replace the motherboard.
  In most cases the chip belongs to the mobo anyway... something like this can be done by an ASP in your country.

  Then please get in touch with the guys to get more details about this

  I wish you good luck

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Camileo P100 screen is black, but the noise from the unit

  Hi all
  I just bought a Camileo P100 and fully charged.

  Although it seems to work when you take a picture the camera 'clicks', the video recording the LED flashes, the touch screen is black and I don't see anything.

  When you touch the screen, it doesn't seem to be working (there are noises from the unit when I touch the screen), but the screen is black.

  Can anyone help?

  Thank you
  Mark

  Hello

  Try, press and hold the button On / Off a few seconds.
  Also check if the opening of the camcorder is open

  But it looks a bit like a hardware problem.

• Satellite A300D is runnig but the screen remains black

  Hello!

  I have a big problem with my Satellite A300D.

  This morning I forgot to connect my laptop to the net elec, and so my battery drains.
  When I reconnected and restarted my laptop I could see the Toshiba and splash screens of Windows, but after these the laptop screen becomes black.

  You can see the cursor, but the rest disappeared.
  The screen is all black.

  Strangely, when I press ctrl + alt + delete, the vista opens again, and I can select and view the Task Manager.

  What should I do!

  Hello

  There is a solution that could help bring back the screen.
  in Notepad, remove the battery and unplug the AC adapter.
  Wait about 30 minutes and reconnect the two parts.
  Then try again to put the laptop.

  In many cases, this procedure helped to set something like this.

  Good luck

• Satellite L505 - 14 d: my screen is black, but the computer is still running

  I bought this computer in September and it worked fine except this time I had to reload the whole system because of two anti-virus programs, but I think that this has nothing to do with my problem. I've been on the PC, the other day, and all of a sudden it turned black. I wasn't doing anything unusual. When I looked at him the screen was all black, but the computer was working as he has always done. I also saw that the market and stop switch on the digital/lock pad would not react. (a green light appears when the caps lock/num pad is activated). What should I do to get this computer running again WITHOUT permanent black screen?

  Hello

  What happens if you press the power button / stop 4 sec long?
  You see the Red Toshiba home screen?
  Have you tried the external monitor or FN + F5 option?

  I think you should also try the common workaround;
  Remove the battery and unplug the AC adapter. Wait a few hours and reconnect the two parts. Then try to turn on the unit.

• Screen goes black but the Satellite A200 is always on

  Hello world

  I just bought my laptop, but there seems to be something wrong with her.
  It happened 4 times already, while browsing or watching videos online, the screen goes all white.

  It will not display or whatever it is, even if I press the buttons, but I know that the laptop is still on because I can still see the light on the screen.

  Is this something normal?
  Do I have to change the settings?

  The computer is not idle, so I think screensaver has nothing to do with the screen going blank the fact that I'm in the middle of surfing (the mouse moves permanently).

  Please help, I need desperately.
  Thank you

  Hello

  What cell phone do you have exactly?
  The screen comes back after restart again?
  Update you the display driver and BIOS?

  I agree with you; This has nothing to do with the screesaver must not allow while working on the laptop.

• Unable to print using HP Officejet 4500 but the screen displays "BUSY".

  Through 'troubleshooting' and are still unable to print. The Start button flashes as usual, then nothing. BUT the screen displays "BUSY".

  OT:OfficeJet 4500

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?

  You can download the drivers for the printer based on your operating system from the link provided below.

  Software & Driver Downloads HP Officejet 4500 all-in-One printer - G510a

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

  For more information about troubleshooting steps, see:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.

• Acer blue 720 and the fan are on but the screen remains black

  Hello

  I appreciate any help that can be provided.  I tried to remove the batter on my daughter 720 and reinsert, but this problem persists.  I can hear the fan and the blue light turns on but the screen remains black.  I tried to rest for 30 seconds and esc, refresh and power.

  Thank you

  Well, when the scrween does not at all (even in text mode which allows a recovery) then it is most often a problem with the cable bwteeen the motherboard and screen, most often following it is a failure of the screen (which requires generally a matter of co-location as cracked screen) and from time to time, it is the motherboard. Probably time to contact Acer support to see on a repair.