HP210-1010NR

Similar Questions

• Power on password for HP Mini 210-1010NR

  I just bought a used HP Mini 210-1010NR on e - bay.  When I turn on the monitor, she prays for power on password or administrator password.  How do past this to use the computer?

  Hello

  Enter: 60780900

  Kind regards

  DP - K

• Install windows xp in hp mini 210 1010NR, help me please is urgent...

  How can I install windows xp in hp mini 210 1010NR... I tried to install windows xp service pack 3, but I could not, can someone help me please its urgent thank you...

  You need to integrate the drivers Sata ( ICH7M/MDH SATA AHCI ) and burn a new cd XP with nLite.

  Here is a guide showing how to integrate and here are the drivers Sata . 7-ZIP or Universal Extractor are good out of the installer.

• HP Envy 14-1010nr: HP Envy 14-1010nr Notebook PC: replace and upgrade to USB 3.0 ports

  Hello
  
  I have a HP Envy 14 - 1010nr Notebook PC, which had two USB 2.0 ports on the left side and a USB 3.0 port on the right.
  
  USB 3.0 port was damaged such as connectors plugged it seem a little loose and can move laterally a little so that the connection to the device comes in and out - makes it uncertain to copy some stuff on a hard drive through it, for example.
  
  Is it possible for me to replace this port? Where could find a spare part for that if it can replace?
  
  Even though I am inside the computer, I might as well replace the USB 2.0 with USB 3.0 ports ports if the pats replacement for that exist...

  You're right, because there is no audio + USB 3.0, only the original + USB 2.0

• HP Mini 210 - 1010NR black screen

  Hello

  I have a HP Mini 210 - 1010NR which has recently stopped working. I ran several diagnostic tests. This is a summary of what I've done and found:

  First of all, I did a hard reset of the netbook (with power with no battery). There was no positive outcome. I followed this test by testing the hard drive and ram. To test the hard drive, I plugged into my office and did a disk check. The results showed that the car was functioning properly. To test the ram, I have used DDR2 ram from another netbook I and tested the operation of the broken netbook. It was still broken. Finally, I noticed the caps lock button was flashing on start up. I looked at the result of the error. It flickered once every couple secconds. This meant that it was an error of type 1 (CPU failure). How to test a CPU failure and would it be possible that it is something else the CPU or the caps lock key blinks once every second torque means that there must be a failure of the CPU.

  Thank you

  Hello ems316, welcome to the Forums of HP.

  Thank you to provide detailed information on the already tried troubleshooting.

  Regarding Notebook and question it if it is a failure of the CPU, based what you have described with this document: computer does not start and the lights blink or the computer will beep (which can be the one you found). That would be a problem with the central unit. In line with the recommended best option would contact support to see what repair and replacement options are available.

  I'm sorry for the incontinence might cause.
  Thanks for posting on the HP Forums.

• 1010NR HP mini slider jams-up

  Just bought a HP mini 1010nr. I love it, except for one problem. When I move the cursor upwards or downwards it jams and this funny little money search rectangle appears at the end of the needle. It's a random thing, however. But there are enough to make me crazy. I suspect it's something Microsoft has added to facilitate life ' ' on the Compleat fool, but it makes me a little crazy. I went through all the drivers, system information, drivers of pointer, preferences, etc and can find no way to turn it off. Cannot find any mention of this in the documentation provided with your computer. If someone has had this problem and did not what to do about it? Let me know before I throw the thing against a brick wall. It is difficult to do any work, when the jams constantly like that thing. Thank you!

  OK, I posted the above message yesterday, and in the meantime I found how to solve the problem. It's something which is called "Virtual scroll." Believe me, I don't think you want this feature, so I'll tell you how to turn it off.

  Click the Start button > Control Panel > mouse > device settings tab > settings > click on virtual scrolling. Then uncheck enable Vertical scrolling. Click on apply. Life will be good.

  Message edited by stonehenge on 16/01/2009-11:38

• HP210 G1 Notebook: updates of Windows 8

  I recently bought a laptop computer to the G1 HP210 with Windows 8.1 installed. The problem is that when I try to install all Windows updates to update the system, sometimes 30%, restarts and then immediately freezes and goes to a black screen. I can only restart when entering the system recovery and return to a previous restore point. I tried after a clean boot without success. By process of elimination, it seems be updated no 2919442 which is around 900 MB in size, which is the problem. Anyone have any ideas?

  I managed to solve the problem at last. When I checked the HP support, there was an update to download BIOS and after installing it, I managed to install all of the wait Windows updates successfully.

• Computer HP mini 210 - 1010NR: password administrator or power on password

  Im a hard time getting into my laptop the system disabled code is 82788175
  ID really appriciate any help please and thank you.

  @Rviviana

  Enter 33680171

  Kind regards

  DP - K

• HP MINI 1010NR LAPTOP: HP MINI 1010NR SYSTEM ORDER

  After failing the connection of three password options. It says the password check failed. Fatal error... System CNU8466ZZ4... This is the error code how to fix this or get the Master Pass code... Plese help someone...

  Hello

  Enter e9luvgg00v (3rd character is a tiny, 8 and 9 are zero)

  Kind regards

  DP - K

• HP mini 1010NR PW fatal error... system halted

  Desperately need help...

  Computer displays... Enter current pw.  I forgot, and now it's displaying...

  Password check failed

  Fatal error... System stopped

  CNU8454939

  Can someone PLEASE

  Thank you

  Try > e9luvqvofo

• Beats Audio missing shortcut after recovery (Envy 14-1010nr)

  Hello

  After replacement, hard drive failure and subsequent reinstallation of my system to my restore disk, most things seem to remember them.

  One thing I noticed which does not seem to have done it is the keyboard shortcut to turn audio Beats and off. It's the B button, and I tried alt - B, fn - B, CTRL-B and SHIFT - B and none of these work.

  The Beats Audio system tray app works and where I can go in and adjust the equalizer settings, and which provides not audible differences, Beats audio is so, in fact, work.

  The keyboard shortcut no longer seems to work.

  How can I re - activate? I don't see a setting for it in the application of Beats Audio.

  Hello

  Try to download and reinstall the HP Quick Launch software from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp51501-52000/sp51650.exe

  When the installation is complete, restart the laptop.

  Let windows take over completely for a few minutes before checking if the combination fn b now works.

  Kind regards

  DP - K

• passwordfor bios need a hp mini 1010nr

  I have a mini hp from my friend and he could not remember the password of the bios.

  I want to give this laptop for my son who is 6 years for the school.

  If you could help I would be very grateful

  VERMINATOR, for your security please remove the serial number of your post.

• HP MINI 210-1010NR * HARD DRIVE THERE IS NO MESSAGE *.

  When you run the Test at startup, it gives this message.  There is no hard drive, that's why the test at startup comes as "failed" and he also said that the found boot device (3F0)

  It seems that the hard drive has failed, it must be replaced.

  Here's your guide to service, see "component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c02241565.PDF

  If it is under warranty, contact HP directly for a free replacement of the hard disk.

  .

• HP mini 1010nr: password bios hp mini1010nr. error message cnu85024pd

  I bought a used hp mini1010nr, cant get past the BIOS password.

  @tomkat6914

  Enter e9luq17v2t

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• BIOS password for hp mini 1010nr

  Hello

  I get the stop CNU8467V24 code.

  Please help me with bios password.

  Thank you.

  Try

  e9luvgx67v