HP Mini 210 - 1010NR black screen

Similar Questions

• Power on password for HP Mini 210-1010NR

  I just bought a used HP Mini 210-1010NR on e - bay.  When I turn on the monitor, she prays for power on password or administrator password.  How do past this to use the computer?

  Hello

  Enter: 60780900

  Kind regards

  DP - K

• Install windows xp in hp mini 210 1010NR, help me please is urgent...

  How can I install windows xp in hp mini 210 1010NR... I tried to install windows xp service pack 3, but I could not, can someone help me please its urgent thank you...

  You need to integrate the drivers Sata ( ICH7M/MDH SATA AHCI ) and burn a new cd XP with nLite.

  Here is a guide showing how to integrate and here are the drivers Sata . 7-ZIP or Universal Extractor are good out of the installer.

• HP Mini 210-4000 blue screen of death PAGE_FAULT_IN_NONPAGED_AREA Error

  I've been up and down the Forums here with no specific luck, unfortunately, so I'll ask even if this has been asked and solved in another part of the site that I may have missed.

  I'm trying to untangle HP Mini Notebook a friend, model HP Mini 210-4125sa. The machine starts well enough until last week, when it was suddenly decided to blue screen.

  The text of the error message displayed in the BSOD reads as follows:

  PAGE_FAULT_IN_NONPAGED_AREA

  TECHNICAL INFORMATION:

  STOP: 0 X 00000050 (0X87E40000, 0X00000000, 0X00000000, 0X92442B13)

  I can't start after loading Windows 7 - the load bar screen makes two fifths upwards and that's all.

  I had thought to try to recover the operating system, if possible, of what is apparently a recovery partition that is created on the hard drive (I have not worked with these machines before, unfortunately), but I can't figure out how to get to that partition before the typing error.

  In addition, after trying to download a piece of software of HP USB recovery Flash Disk Utility, I realize it seems necessary to use it in fact of the computer laptop itself, that is not possible.
  Having begun to run various tests on board in the menu of the BIOS, the hard drive Test failed just apparently (more specifically the hard drive part optimized DST test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood). HP unfortunately were not a lot of help as they wil only offers unique support technician call for forty pounds, or to take the laptop away for repair, which cost almost as much as the original of the material costs. Of course, I prefer to try and resolve this issue myself but have hit a bit of a wall at the present time. Any suggestion would be great at this point.

  This test equipment for the hard drive is a gift died of a faulty element. A failed hard drive is a show-stopper.

  Hard drive optimized DST part of the test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood) This is important information.

  A corrupted NTFS (hard drive) volume can also generate the "error PAGE_FAULT_IN_NONPAGED_AREA" stop message.

• HP mini 110-3000 black screen

  The reset but still xp does not start.

  Just a cursor blinks upper-left with black screen.

  All the test went thru ok and Quick View strives to find

  but I can not for xp.

  Did you run the Diagnoistics to start during the startup (by pressing F2) and run tests of different? If Yes, and the material is very well, I think it would be that the OS is corrupted and you need to reinstall the operating system to use this mini device.

• Computer HP mini 210 - 1010NR: password administrator or power on password

  Im a hard time getting into my laptop the system disabled code is 82788175
  ID really appriciate any help please and thank you.

  @Rviviana

  Enter 33680171

  Kind regards

  DP - K

• HP MINI 210-1010NR * HARD DRIVE THERE IS NO MESSAGE *.

  When you run the Test at startup, it gives this message.  There is no hard drive, that's why the test at startup comes as "failed" and he also said that the found boot device (3F0)

  It seems that the hard drive has failed, it must be replaced.

  Here's your guide to service, see "component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c02241565.PDF

  If it is under warranty, contact HP directly for a free replacement of the hard disk.

  .

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?

• Mini210-1000 HP: HP Mini 210-1000 AHCI Support?

  Title says it all, to a degree...

  Nothing anywhere in the BIOS that indicates this thing supports AHCI, I so wanted to just take your brain...

  If I install an SSD to replace the disk HARD in it now, will it work? Will I have AHCI/TRIM support?

  Any contribution is appreciated. Thank you!

  What HP model year cell phone is yours?   What is the model number on the black serial number on the bottom?

  The one I have is quite old. I just checked and it's a HP mini 1000.

  @ChorusOfOne

  Do not leave immediately.

  I just watched a little more features. The manual may very well be wrong.

  The most recent mini 210-1000 with product number WA543UA #ABA ad product name HP Mini 210-1010NR has a disk hard Serial ATA II (SATA).  If it is indeed this than yours, it means that a SATA SSD would fit well and work.

  See the first part of the next video. Of course, it looks like a SATA hard drive for me. Check out the connector.

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• Ipad black screen after updating ios 9.2 2 mini

  Hi all

  My mini ipad 2 was somewhere in the update to ios 9.2 and when I tried to unlock it, it did not.

  I got a black screen, I thought that maybe battery or something.

  After the cable, I hear the sound of connect 'dived', so he is still alive.

  Then every 5-10 seconds who even connect sound repeats.

  So I tried the following:

  -Home and power button, connect to itunes-> restore

  -Home and power button, connect to itunes-> update

  -Home and power button, connect to itunes->-> tried restoring back to 9.1-> causes error 3194

  So, I tried all of the obvious ways to get the ipad back alive again, but I still have a black screen and the sound of connection.

  What to do?

  See the following support article on error 3194. https://support.Apple.com/en-us/HT201442

  -AJ

• Black screen appears 2-3 min long on Satellite L850-F313

  I have problem with my laptop Satellite L850-F313, when I start my laptop computer, a black screen comes after Windows Welcome I see a black screen for 2 or 3 minutes until the desktop is displayed.

  I thought that the black screen comes from Microsoft issue but when I contacted them they told me that I have to check with Toshiba because this problem can be solved by Toshiba.

  Could you please help me?

  Could connect you an external monitor to the laptop and you could check if something would be seen on the external monitor?

  You said that after short time (2 / 3 minutes) the office would appear... Well, for me, it means that the system needs time to complete the start-up procedure.

  Without doubt, the question relates only to some of the problems of the system and so I might recommend to a Toshiba recovery procedure and to check the laptop functionality using the recovered expenses system.

  I don't know what windows system was preinstalled on this laptop, but usually you can use the recovery media created clean in order to start the recovery process, or you can use the recovery of HARD drive... process details should be described in the laptop user manual.

• My Mac mini end of 2012 does not start: stuck at the total black screen

  Thus,.

  I tried to install Windows 8 with bootcamp using a USB key. It did not work ("" can not do a new partition on this disk or some * like that "") but this, I'm sure that has not affected my install OS X, I've never been format the Bootcamp partition.

  So, I leave the Windows installation program, reboot and remove the USB key. Now, I get the black screen that OSX shows when it has no OS, giving me the impression that he wiped / corrupted installation.

  Very well...

  But there is a twist. I can not hold option to join the boot device selector, nor can I press CMD + R or retrieve internet. Metal target does not work. I have reset the NVRAM successfully a few times, but it start always black.

  I am using a wired keyboard and mouse. I tried to use external SuperDrive with a CD player. As well as USB. I'm lost and I'm an experienced technician, and I admit that I am an iSheep. Then Yes.

  Thank you.

  (And I didn't get any update of third party other than an SSD, which worked well for centuries)

  EDIT: and I reset the SMC EDIT 2: I know also that this probably isn't a hardware problem, I am positive my OS X install and the OS X recovery partition are corrupt. I don't understand why I can't hold option, and I don't understand why the recovery of the internet does not work when you have no recovery partition. I would be grateful if I could start anything, without having to open my Mac.

  Do you get a startup chime?

  Unplug everything except KB/monitor / power and try to start with the command + R and press the Option key.

  If still problem dismantle the Mac and disconnect the internal disks and try again

  Try reinstalling the memory

  Try an another KB

• HP Mini 210 1091nr: Hp Mini 210 1091nr. I get a screen for administrator password or unlock password

  My computer Hp mini 210 has been sitting for months. All passwords are forgotten.

  When I try the passwords nothing works. After 3 times to try, I get an error code of 50147723 to disable the system.

  [Personal information]

  How to use this form of the system?

  @reyn27

  Enter 45825305

  REO

• Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

  Windows 7 (System. org) was running fast and good.

  Updated to 10 and after a few reboots, it has been installed and working.

  whenever I start cold blue windows logo appears and the device goes into screen black.

  It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

  I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

  This time it was much faster (a few seconds) and I went into the Device Manager.

  I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

  Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

  Now I'm on the black screen again whenever I restart.

  I hope that the description of this issue is understandable

  I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

  Data sheet:

  CPU: i7 [email protected]

  RAM: 8 GB DDR 665 MHz (9-9-9-24)

  MB: HP 1803

  Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

  Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

  Audio: IDT HD Audio

  Windows Pro 64-bit 10

  Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

  I hope someone can get some ideas

  PS. : I'm not a newb

  The solution is either:
  ¤ Accept the loooooong delay
  ¤ Do not upgrade for Windows 10