Hp2540: HP2540 while one claim Code

Similar Questions

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• HP ENVY 5530: Claim Code

  Hi all

  I put my HP printer with ink instant before and that's why, my printer currently has instant cartigdes of HP ink inside. However, I cancelled my registration for a while and I would like to implement a plan of education again and I need a code of request to be printed by ePrint. However, it says "Cartidge can be used until the printer is registered with ink HP moment" and so I can not get my claim code to register my printer because my cartridges need to be connect to a snapshot of HP ink plan.

  It all sounds very complicated!

  Is there another way I can get a claim code?

  Hi @ac96,

  If you are in the United States, you can call the instant support of ink to the 1-855-785-2777 Office. If you are not in the United States, go to www.instantink.com to find the number of support for your country. You must be disconnected (e) Web site to see support options.

  Alternatively, you can try the following steps:

  1. On your HP ink instant account page, click on register another printer.

• HP Envy all-in 4502 a printe: impossible to finish this Eprint and find a claim code

  I bought a hp envy 4502 printer all in one, he says I need a code of request to add a device, however I looked all printed information all reports and I don't get all a claim code. No email address for it or anything. I'm not even an option on the printer, all eprint the without wire is configured and works fine but no option of eprint I printed status report, the test results page and the configuration page and this is the only options for all types of reports to print Please help me

  Hello

  Please try:

  On the printer Panel, tap ePrint ().

• Don't receive the claim code

  I want to register my 1102w Web Service laser jet printer to print my documents remotely, but does not receive the code.
  How can I get this code at the entrance to the system when I get the question on: "enter here your request."
  Where and how do I get this code?

  Hi Agreeks,

  Welcome to the Forums of HP's Support. I see you want to learn how to set up your printer, Laserjet P1102w ePrint service.

  The printer must be connected to your wireless network before we can get the printer application code. I've included the document to the printer on a wireless network . Different operating systems have their own section. Please, click on the section for your operating system and follow the steps to connect the printer to your wireless network.

  Once you have the printer connected to your wireless network, it must confirm that the printer has the latest firmware. I've included the Getting the latest Firmware and updates document that will guide you through how to check and how to do the update if one is necessary.

  Now let's get the printer application Code. This document will guide you through how to get the web services information sheet which will claim code. After completing the worksheet, you can then follow the steps setting upward a Custom Email address for ePrint so that the address of electronic mail of the ePrint printer easier to remember.

  Please let me know how it goes.

• Get the claim CODE

  I noticed your comment about the DJ2540 on how to get your claim code.  Well, I can say that this paticular model has not one... How to get it, oh no. This paticular model isn't an eButton, so there is no way to get the web service to claim the CODE... So does this way of showing how to get...

  Hello

  It is not an ePrint printer so it doesn't have a claim code to use ePrint. It's a printer wireless network so you can connect and print wireless. The following link shows its specifications (Wireless: Yes, ePrint: No.):

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5296007#! tab % 3Dspecs

  Kind regards.

• Cannot get the claim code and restore Apps

  I have an Officejet Pro 8600. I managed to install the printer and print the claim code and linked to my account. For some reason when I log into my account it shows not the printer. Also when I go into Control Panel, I can not access all the menus via the icon "eprint" or the "apps". I get the error message is "the eprint feature has been disabled" and "the Apps feature has been disabled. I can't turn them on and I cannot print another application code to connect the printer to my account.

  This is the funniest! I can always send an email to the printer and it prints!

  Any ideas that I am totally lost on this one and want to go back on these characteristics.

  Thanks in advance

  ADE

  Hi Deeperdown,

  Thank you for the information, it is much appreciated.  Your statement of "service is disabled and contact the administrator" is very informative.

  Could you please check your administrator settings in the built-in web server (EWS) for the printer? There is an administrator setting that allows to disable web services.  If you do not know how to access the built-in Web server steps lie in your on page 232 user guide in the section titled "to open the built-in web server".

  Once you have the Web integrated server open please click the 'Settings' tab then click on "Administrator settings" in the left side menu (see screen capture below).

  

  That should bring up a page similar to the screenshot below.  Please ensure that the Web Services, ePrint, and Apps all have.

  

  Once those who are turned on, please turn your printer off, wait 15 seconds and then turn on the printer.  You should now be able to access the web services menu and get your back ePrint.

  HP Officejet Pro user guide 8600

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• the printer 7520e claim code

  I have followed the instructions for the printer to the printer 7520e claim code, but can't find option "print report".

  Thanks for the detailed response.  I must apologize because I found the claim code on one of the pieces of paper that I had printed.

• Where can I get a claim code?

  The software cannot find an internet connection, even if I have one as you can see it. I don't have a claim code to make the recording offline. About to give up and return the product.

  Hi edwards25286076,

  Please consult the following document: Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications

  Kind regards

  Tanuj

• I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.

  If it's MacBook1, 1, 10.6.8.

  If it is MacBook2, 1-MacBook4, 1, 10.7.5.

  If it's MacBook5, 1 or MacBook5, 2, 10.11.6.

  If it's MacBook6, 1 or greater, 10.12.

  (144865)

• Tab HP Web services to find the claim code is not found

  Hello

  I'm trying to implement HP ePrint on my printer HP Laserjet M1522nf connected to my home network. I am unable to find the claim code for my printer set up the device connected HP services.

  I entered the IP address on my web browser and entered the Printer Setup tab, but I can't find the web services tab or the printing page of information for the claim code.

  Please let me know how to find the claim code so that I could set up ePrint.

  Thank you

  Harish

  OK done judt this device is not ready for eprint.

  Please ignore my previous post.

• OfficeJet HP6500A more: can't stop e-Print to get the claim Code

  HP support says "disable e-print and deliver on the clain code obtaion" I can't disable e-print! When I try I get a message saying 'the printer could not connect to server' error 'you can connect the printer to a proxy through the internet' "to do so enter the proxy server and enter the details when you are prompted" MY QUESTION: WHAT PROXY SERVER? Where can I find the so-called proxy server. I can not turn off the e-print without mysterious proxy server. Nobody at HP Support knows, they want to come on my computer. HOW THAT WILL HELP, IF I HAVE TO GO IN THROUGH THE PRINTER? I'm not let someone remote my computer! I've done it before and all they do is look around where they don't belong, then tell me "I have a friend who can fix it for $200.00" BS! I just want to know how to get the claim code so I can use e-print. This may not be such a mystery that emit a person cannot tell me by phone or e-mail, how can I recover the claim code. OR, where I can find this mysterious Proxy Server turns off e-print, so I can turn it on the recovery of the claim code.  PLEASE DO NOT SEND ME LINKS OF WHERE ALL THE ANSWER OF WHAT IS CALLED, IT IS HERE, I HAVE ALREADY DID NOT RESEARCH DAYS, JUST GIVE ME ANSWERS TO MY QUESTION *.

  WHAT PROXY SERVER? Where can I find this so-called proxy server!

  Hello

  First download and install the latest firmware below, then check for the difference:

  http://ftp.HP.com/pub/softlib/software13/Printers/oj6500/OJ6500_E710n-z_R1621A.exe

  Once the latest firmware has been installed check for the difference once the HP ePrint menu.

  If the same error persists, press the right arrow and press Setup, then Web Services configuration tab.

  Tap on delete Web Services and follow the steps to the web services of devil.

  Then enter the menu of Web Services again and follow the instructions on the screen to reactivate the service and check for the difference.

• Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

  I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

  I tried a disconnection and logging into my account, but this has not solved the problem.

  I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

  Printer is an Office Jet 8610

  Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

  * beep *?

  The problem disappeared after I checked my email address

• HP Deskjet 2549: I pressed the icon e-print web on my HP Deskjet 2549, but I can't get the claim code. Help!

  Same as above... I can't find my code request... where should I go? On my phone, where? No idea at all. Please help me ASAP!

  Hello

  There is no claim code for this printer. The claim codes are used to set up ePrint (the ability to send content to your printer) and web services are needed for this - your printer is not active ePrint.

  You can however print wirlessly from your mobile phone using the instructios I've included below:

  The simplest is to print wireless from your mobile device to download the HP eprint app and make sure that your printer and devices are connected to the same network wifi - once the operation is finished, you will be bale to print wireless from the eprint app.
  
  You can also use direct funtion wireless to your printer by turining on the button on the front of the printer wireless. This allows to generate the printer it's own singal wifi that you can connect through any wireless device. To find the wireless password, simply hold the direct wireless for more than 3 seconds and it will display the password on plain paper (make sure that the paper is loaded).

  Let me know if you have problems with the installation.