HP3520 offline at startup

Similar Questions

• Startup Repair offline, startup guard

  This has happened so many times, got my computer, bought separate parts (custom-made, over £1200) installed windows, everything has worked well until about a month. He projected blue and then my hard drive could not be found, kept saying (the disk name: No. NAME TYPE: NTFS) it is a 1 to WD hard drive. Finally it is fixed by raising constantly.

  However, this same problem happened about 4 times now, the computer crashes, I pass to the far and same error on blue screen with the hard drive becomes "missing" or "non-detectable".

  Now, it just happened again, but this time he decided to worse, Startup Repair maintains the start even when I hit 'start windows normally', 'safe mode', ' last know good config "etc.

  Problem is the startup repair can't do anything, this is the error for the Startup Repair:

  Drive system: = (empty)

  Windows = (empty) directory

  AutoChk run = 0

  Number of root causes = 1

  Test performed

  -----------------

  Name: Search for updates

  Result: completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Test performed

  -----------------

  Name: drive for system test

  Result: completed successfully. error code = 0 x 0

  Time required: = 16ms

  Root cause found

  --------------------

  A hard drive is not found. If a hard disk is installed, it does not

  To fix I tried everything, checked cables on and more, all are inserted, tried to start in all options, kicked motherboard settings, nothing happened with no information, seized modified BIOS type of IDE RAID on AHCI, none work. I stumbed and I have no idea what goes on, anyway, its beginning to annoy me, a computer with all new and new specifications should not do this after a month. And especially should not be late with an i7 processor. Also, I noticed earlier, I keep getting loading screen instead of windows 7, windows vista, even after a fresh install, it still has windows vista startup.

  Perform a test drive using the following tool: Data Lifeguard Diagnostic for BACK (CD) Carey Frisch

• I can't get windows vista at startup I get problem event startupRepair in offline mode and will not let me get on the computer

  When I try to turn on the computer it gives me a message of startup repair. There are a few problem signatures read like this

  The problem StartupRepairOffline event name

  Hi GwenBenson,

  1 have you tried running the Startup Repair tool?

  2. when the problem started?

  3. did you of recent changes to the computer?

  4. are you able to boot in safe mode?

  Method 1:

  Step 1: You can check if you can boot into safe mode.

  Start your computer in safe mode

  Step 2:

  If you can boot into safe mode without any problem, then you can try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 2:

  Alternatively, you can try using the last known good configuration and check. It's a Windows startup option that uses the most recent system settings that worked correctly.

  For more information, you can consult the following article:

  Using the last good known Configuration

  Hope this information is useful.

• mail opens with boxes mail offline

  Lately when I opened the application mail, all mailboxes are offline.

  Hello Kluunsi,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your Mac, it's not what you expect. If I understand correctly, you are able to open the Mail application, but the mailboxes show offline. Here are some steps that can help to identify and resolve this problem:

  1. first of all, try to leave the Mail app, and then hold down the SHIFT key while you open the application. Temporarily, this prevents the reopening of its documents and windows app and can help solve questions like yours.

  Automatically re - open windows and applications, as well as documents on your Mac.

  2. then, use the built in Mail connection doctor to obtain more specific information on these mailboxes show why offline connection and how to get them working correctly again.

  Use Mail connection doctor
  If you cannot send or receive e-mail on your Mac.

  3. use 'safe mode' to start your Mac so that it performs certain checks, remove files from the cache system verifies your startup disk and attempts to fix problems if necessary directory. Login to your user account and test the issue again. If the problem is resolved, restart your Mac normally and test mail again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  See you soon!

• Firefox crashes at startup, even in safe mode

  Firefox has just started to crash at startup, even in safe mode.

  I also tried to create a new profile (which Firefox let me do), but it crashed as soon as I tried to use the new profile.

  The only way I could get it to start is putting him to work offline, which is obviously not very useful.

  Here are a few crash IDs:

  BP-d5fc34cb-2f6b-48CE-8327-ceb2c2151011
  BP-e2667a62-9301-414C-894e-bd5fc2151011
  BP-bce19f5e-30f5-47D8-8c48-8976b2151011

  BP-c11bab84-69e6-4516-b3a5-8f50f2151011

  The last ID is for is the first crash I got, which didn't happen at startup.

  Thanks for the tips. I still don't know what was wrong, but a restart of the computer has set.

• I downloaded a file mbox my gmail and deleted my e-mail address. I want to exist offline. Can I check these mails with Thunderbird without internet access?

  Hi, I would like to exist offline / without internet for a while. I downloaded several of my different and deleted email accounts mbox files. I would like to see the emails in offline mode. Can I do this with Thunderbird? Thanks for your time, Jen.

  under 'Tools' > 'account settings '.

  on the left are the server settings - choose

  Uncheck the "check for new messages at startup '.
  Uncheck "automatically check for new messages every minute _.
  Uncheck the "automatically download new messages.

• I like to keep an eye open when I go offline. Windows7

  [Firefox for Windows7]
  I "refreshed" Firefox settings by default and has not helped.

  What do you mean by "disconnect"?

  Is it through "file > work offline" or do you mean that you close Firefox and you want to reopen the tabs the next time?

  You can check the startup parameter:

  • Tools > Options > general > startup: "startup of Firefox:
    "Show my windows and tabs from last time '.
    "Show my home page".
    'Display a blank page '.

• Time Machine, which could cause slow startup?

  After issues with finder/desktop freezes I disabled automatic backups time machine and disconnected the disk.

  The drive does not have an index problem if I try to go into the time machine - but it made a backup and I don't want to lose those there until I have solve the problem.

  It all started when I was a housekeeping cleaning - deleting a file PDF - update of my photos outside of iphoto to include an image with text etc.

  Lately reached some stability during starts - in this very fast - almost every day except Wednesday - what is the start of a new week on my time machine - today's startup disk was gray and blue for a few minutes - then to avoid a freeze I restarted after loading the desktop computer.

  This also happened this afternoon when I started again - same last week - up to what he did and why - nothing in the logs to indicate anything unusual.

  If I plug the drive and push a time machine backup will scan the drive anyway so don't know what's the point.

  Just a quick note here - while in offline mode system - about 5 minutes after the use of widgets - frozen - was to force the reboot - but I did remove all the widgets and disable all the table - as one or more of them--came with Snow Leopard - can be the source of the problem.    I just put the calculator (not the widget application

  Extra - last night I noticed a lot of disk activity when I didn't do anything other than look at the activity - with TimeMachine notifier - monitor issue as time machine is not connected and is off - when I connect it - it will scan the disc again - so what is the Apple of point.

  Had trouble starting this AM - had a finder does not not - was able to force quit of doc and did a reboot, and I did a second reboot.

• Photosmart D110 offline

  DESCRIPTION of the PROBLEM: After numerous installs, uninstalls and reinstalls, my HP Photosmart D110 says it is offline.

  OPERATING SYSTEM: Windows 7 - Home/32-bit

  METHOD of CONNECTION: wireless

  PC: Dell Hybrid

  Error MESSAGES: No.

  ***

  I bought the new printer and out of the box Friday, February 18, 2011.  I followed the instructions of installation in the letter.  I have assigned an IP address from the printer on my wireless (192.168.1.102).

  My router is a Linksys WRT160N

  The printer is recognized by the network.  I have access to the Web page of the printer icon appears in the section "Printers" on my PC (and was assigned to the default printing with the green check mark)

  ***

  This printer will print through webpage HP Eprint via his email address.

  The printer WILL NOT print if I send a Word Document to her to my office because it says it's offline.

  As a side note, the HP Solutions Center's won't past that the homepage because it says that the printer has not been set to the top.

  I uninstalled the HP software, reinstalled the software in "Selective startup" mode and normal mode in addition to 1 times.  Whenever I reinstalled the software, it finishes the installation.

  I don't get the error messages from the printer or the AVG security software that is installed on my desktop.

  Help me, please, because I'm going crazy.

  To test the ability to print from the computer by using a different driver. Let us know if you have received an error on one of the steps.

  1. go into the Control Panel, the devices and printers

  2. Add a printer

  3. Select local printer, and then click Next

  4 create a new TCPIP port and assign 192.168.1.102

  5. Select the Deskjet 5550 as the driver.

  6. print a test page.

• Earlier to let windows 7 update itself, now system won't boot & Startup Repair windows don't fix it either, help please?

  said the system offline?

  http://Windows.Microsoft.com/en-AU/Windows7/Startup-Repair-frequently-asked-questions

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information. For more information, see What are the system recovery options in Windows 7?

• Windows XP Pro startup slow and even slower on closure

  Installed clean install of Windows and drivers. Reinstalled McAfee, with difficultygetting media players i.e Real player to work properly.

  For the slow race, there are several causes:

  Microsoft registry problems = slow computer!

  Spyware/Adware

  RAM

  The fragmentation

  Etc.

  Below can help you speed up your pc:

  For IE, click on tools, Internet Options delete files (offline) clear history (updated to save to 0 if you want) click OK and restart

  For Firfox, press ctrl + shift + delete, and then click clean private data.

  Manage your startup:

  Open your Start menu-> click on run-> in the command screen type "msconfig.exe"-> in the "system configuration utility", click on a 'service' or 'Startup' tab-> uncheck all the programs you are no longer help.

  The fragmentation

  1. Right-click the C drive.
  1. Click on properties.
  2. Click on the Tools tab.
  3. Click "defragment now".
  1. Click on defragment.

  You can search what process you use cpu and the end of the process.

  Under steps:

  1. right click on the taskbar.

  2. click on the Task Manager.

  3. click on the processes tab.

  4. double-click on the CPU.

  5 is if "system idle process" is max.

  6. If it is not a right click and click on end process.

  Learn "why is my computer running so slow?" and "how to speed it UP:

  http://downloadlk.com/WhyIsMyComputerSlow.htm

  Use the tool: http://downloadlk.com/themosteffectiveregistrycleaner.htm

• super slow old laptop with too many startup programs

  RUNNING XP ON AN OLD LAPTOP WHICH IS REALLY SLOW, HOW CAN I DELAY OR SAFELY REMOVE EXCESSIVE STARTUP PROGRAMS

  Follow the tips below and also answer the following questions: brand and model of the pc, current antivirus, operating system and service pack.

  Stanley Zhang tips

  Will probably want to clean this machine...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Dell 1815dn printer Vista Home Premium remains offline

  Printer 1815dn Dell MFP has been my home for several years and accessible network in about 5 computers running Vista Home Premium (32 and 64 bit) and XP. Suddenly one of the computers (VHP 32) always has the printer in offline state. It is not possible to put online. Other computers can access printer very well. Before restarting the computer has corrected the problem, but now things in the print queue will print started upward but the switches of the printer (on Vista) offline and no printing. I reinstalled the drivers for the printer, but it is always offline.

  Hi Surf_SD,

  1 check the settings by clicking on "Printer" in the menu bar of the pop-up window and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  2. If the steps above do not resolve, then make sure that the printer spooler has the automatic value, steps to assign automatic services

  a. Click Start and type services.msc in the search box

  b. Locate the Printer Spooler service

  c. right-click on the service

  d. If the service is stopped and then starts the service

  e. Select Properties

  f. and in startup type, select automatic

  3. even to try the steps listed in the link below and check if it will help: printer network problems:http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-network-printer-problems

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change startup programs, as MSE disables Defender?

  Separated from this thread.

  In order to access the startup programs, Vista seems to need Defender.  However, since installing Security Essentials, I not was able to use Defender even temporary or offline!  How would I disable Security Essentials to proceed?

  Hello

  It is not a good idea to go in this direction:

  'How to temporarily disable Microsoft Security Essentials'

  http://www.PCWorld.com/article/2025707/how-to-temporarily-disable-Microsoft-security-essentials.html

  Instead of disable MSE to use Defender, use either of the following methods:

  To now change the Vista startup programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon