hp4050 print spam when it is connected via a parallel to usb cable

Similar Questions

• Problem with sending a message when you're connected via Wi - Fi

  Hello. Still getting used to my Dext (owned it for about 4 days). I noticed this morning that I can't send the mail from the POP3 account, I set up on my Dext when I am connected via Wi - Fi - when I try I get an "authentication failure". When I disable Wi - Fi email sends end. There is no problem with webmail - send although I am connected to the Wi - Fi or 3 G network.

  Anyone know how to send the mail while POP3 on the Wi - Fi network? Thanks in advance...

  Understand the problem - port incorrect settin for mail server outgoing. Changed to 587 according to some messages that I saw during a search - that did the trick!

• slow when they are connected via anyconnect VPN, ASA OS 9.0

  Hi guys

  My users are complaining that they are experience slowness when they are connected via vpn anyconnect for ASA os 9.x, 5 Mb files tikes 15 mts rough with them, even if these users also have a connection broadband on their place

  any guy insight

  Thank you

  Hi Ibrahim.

  My first suggestion to you is to follow the recommendations of Cisco, associated with latency problems.

  hostname (config) #-group attributes policy
  hostname (config-Group-Policy) #webvpn
  hostname (config-group-webvpn) select #svc dtls
  hostname (config-group-webvpn) #svc df-bit-ignore enable
  hostname (config-group-webvpn) #svc routing-filtering-ignore enable
  hostname (config-group-webvpn) mtu #svc 1200
  hostname (config-group-webvpn) #svc compression no

  (a more recent version, you can use the command "anyconnect" instead of "svc")

  If after this the problem persists please let me know when is the right time to reproduce the problem and collect the balls, debugs and catches. I also need the current configuration of the SAA (see technology in a txt file)

  Kind regards

  Aditya

  Please evaluate the useful messages.

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Windows 7 and HP Laserjet 4 L will not print parallel to USB cable

  I recently updated my home computer for a laptop Acer Aspire with windows7, bought a parallel to USB cable for my HP laserjet 4L printer, downloaded the suggested for the 4L of HP printer driver but I am unable to get to the printer, the documents are stopped printing with a print error message.  I can erase Quebec, but every time I send a document, I get the same problem. When I run the diagnostic troubleshooting Microsoft online he recognizes the HP4L, shows my problem is just a document qued up in spool it printing, solves the problem, but not so much.

  I saw other post of problems with windows7, print USB and the HP4L connection - if anyone can help me with this frustrating problem, I would be very grateful.

  stop the print spooler service restart the computer and start the Printer Spooler service. This is to fix it.

• Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable

  Hello.

  I would also like to ask for help because I'm faced with the same question.

  what I'm trying to get a sound with HDMI, it will not work...

  Delfim João

  Hi @Delfim ,

  Thank you to visit the Support Forums HP and welcome and thank you for all the information about what you tried. I looked in your question about your computer laptop dv7 HP ENVY and the problems of sound with an HDMI cable connected.

  Try this fix.

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  This is a general document on the resolution of the problems with the HDMI connection.

  With the HDMI cable you have restarted the laptop?

  Have you tried another cable?

  Hope it will be useful.

  Thank you.

• Connect the portable printer all-in-one HP Officejet g85xi and need parallel to usb cable and drivers.

  Need to install HP OfficeJet G85xi to computer portable 64-bit windows 7 and need the proper drivers and printer parallel to a usb cable for laptop.

  Hi, you can try the StarTech ICUSB1284 adapter. ($20)

  If you get to install the drivers come with Windows 7.

• DeskJet 6940 connected via ethernet to the airport cable, do not print

  Hello

  I used to run my HP Deskjet 6940 printer using a USB connection. I recently installed an Apple Airport Extreme so I can print wireless. If necessary, the printer is connected to the airport by using an ethernet cable and turned on the light green network. On the advice of a HP rep by phone, I uninstalled all old HP software and reinstalled HP software downloaded from the HP website.

  When I try to add the printer to my 'system preferences', it opens a panel that contains the following options:

  Protocol: Automatically selects "line printer daemon - LPD.

  Address: Empty but allows me to type in the IP address assigned

  Print using: no idea.

  More than two things: when I open the HP Device Manager and select "set up a network, information network configuration printer seems in good condition but the Manager does not allow me to 'apply'.  Not sure if this is important but no the printer utilities appear in my folder utlities since the new software download. Thank you.

  Looks like you are using a Mac.

  First of all, the driver for the Deskjet 6940 is built into Mac OS.  You really didn't need to download additional www.hp.com (sorry for the bad advice) stuff.

  Next, we'll check that the printer is on the network.  In Safari, select bookmarks, display all bookmarks.  Select Hello in the left pane, and then check the Deskjet 6940 appears on the list of devices on your network.

  Then, follow these instructions to reset the print Mac subsystem: http://support.apple.com/kb/HT1341

  Now add the printer to the Print & Fax under System Preferences applet by pressing the [+] button.  The Deskjet 6940 should be among the kind Hello from printers.  Select it and press Add.

  I think that should do it.

• HP 1200 printer does not print check when it is connected to the Jetdirect card but will display the report

  HP 1200 printer is plugged in with the USB cord to HP Jetdirect box and it gets IP from there.   Printer is set for the server with the ip 192.168.10.7 of print

  Print server is 192.168.10.12.    Backend server account try to print to a control with the 1200 HP and output hit the print queue (we suspended the print queue)

  and then when we release printing printing disappears as his will be printed but no keys comes out.      As a test, we ran a simple report on the same printer who had no special formatting and it printed fine.

  Captured audit printing to a file and then realized that file to the other printer, HP Officejet K80, which was not intended for printing and it prints properly which confirms that the control is built in formatting standard code PCL5e.   What is unexplained, that's why the cheque will not be printed on the HP 1200.    Have already had experiences where the USB slave out of Windows workstatoins printers will not print documents at all the other stations of the network.   The print will be struck by the print queue and disappear, but the printer never lights.   In this case, it will work for printing unformated but won't work for the formatted print PCL.   This could be Windows networking printers or simply a problem with the HP 1200 and forum for both checking.

  Hello

  1. are you able to print Word documents, Excel and PDF?

  2 are computers and printers connected to a domain network?

  I suggest you to connect the printer directly to the computer and check if it helps.

  Please visit the following links and check.

  Printer network problems (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• HP Officejet Pro 6230: Install printer drivers when no internet connection

  I need to install the base for a 6230 OJPro on a PC printer driver that has no Internet connection.

  The HP installation wizard insists to request registration information (e.g., zip code), then try to go online to return it to HP.  While the PC is connected to a network, there is no Internet connection, and the installer crashes.

  I get a Dr. Watson dialog box (I cancel), and then the Setup Wizard tries to go online (new) to find a solution to the accident.

  Is it possible to install the printer driver, but not request registration information and/or jump to go online to register?

  I did find a guide the administrator (or similar) which offers etc command line switches for changing the behavior of the installation wizard to do this.

  Thank you

  @John-Smith,

  Thanks for the clarification. I went ahead and installed the basic printing software on my lab and managed to make some changes in the installer so that it automatically opens the online registration. See below:

  Open the basic software download, click on the next button until you get the facility agreements and settings, here you have to click on the link that I've highlighted for you, see the image below:

  

  Now once here, please uncheck the option I have pointed out, you can also choose to disable the other options here, I'll leave to you. See the image below:

  

  Once you have unchecked the box to register online, click Next and continue with the installation.

  This aid? I look forward to hear from you.

  Thank you once again, if you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• How to grant local LAN access when you are connected via a central-site

  I know how to activate the local LAN access in the properties for the client connection, but I don't know how to allow access to the central site

  Central site is a CISCO 1721 with module as well as IOS IPSEC VPN

  tanks for any help

  Hello

  This feature is only supported when you connect to a VPN3K box, its not available for PIX/IOS as a vpn server, allowing it on the client-side custom has no effect when you connect to a server of PIX/IOS.

  THX

  AFAQ

• No sound from the tv when connected via a laptop computer vga cable

  I connect my acer to a sanyo hd tv with a vga cable.  pictue is fine, but the sound only comes from my laptop, using windows 7

  Hello

  I suggest you refer to the link mentioned to ensure that Media Center has been configured properly with the TV below:

  Getting started with Windows Media Center

  You may also like to refer to the below mentioned link and check if the cables were connected as they are supposed to be:

  Connect your computer to a TV

  Note: If your computer is connected to a TV, notes that many video cards and cable types do not support audio signals. You may need to connect the sound card of your computer directly to your speakers.

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you download updates from windows on 13/03/13, I get an error scanner that reports a problem of communication. I still can't print. Printer is HP Officejet 4680 connected via a network c

  I get an error code 4 [(2,7,800,40007)] after installing updates from 13/03/13.  I restored the system (Windows 7) to a restore before 12 o'clock point and all is well.

  Thank you

  I added the updates one at a time and then restarted each time.  Between each update, I also tested the scanning interface.  At the time where all updates have been added to the scan function still worked.  My guess is that the order of installation, or (more likely) the obligation to reboot between updates made the difference.  I still have my wife updated so will update this when I do the update.  Either way, I remember when I went from XP to Win7 in 2010 I had the same error, but that has been resolved by the HP driver updates.

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?