hp6100 keeps ejecting the paper when printing

Similar Questions

• 6525 tear the paper when it prints.

  My photosmart printer of 6525 tear the paper when it loads/prints.  I checked and there is no paper jam and there is paper in the tray.  It is not directly load the paper and when it loads, and print the right corner is folded and the sides of the paper are getting torn apart... printing isn't even with the margin and makes it look like the document is loaded into an angle instead of straight.   I removed the tray paper several times, and the results are the same.  He has not done this until recently.   The book would be the cause?  (This is a new ream of paper HP).

  Hello again katsco,

  I understand your frustration, I sent a message in your Inbox on the HP Forums. Please, go to your homepage next to your name and the user, click on the envelope. See the image below:

  

  Thank you

• Office jet 6500 has HP cannot load the paper to print.

  HP officejet 6500 has failed to load the paper to print. I tried with just a sheet all the way to a full attack, but the machine can pick up a sheet to print. It's fixable?

  I remove the tray paper completely from the printer and make sure that it is not a piece of paper caught in the entry in the printer rollers.

  So, check the steps in the document found here for steps solve problems when a printer won't come from paper.

  I hope this helps.

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• My Epson NX125 printer goes through the paper without printing anything

  "What is required of ' Print Preview ' or 'Print' for my printer through the paper without printing anything.  Last few times he has done this, ink levels were low and I have renewed their but now they are all full and it will not print even though she goes through all the motions.

  See the printer manual or here

  http://files.support.Epson.com/PDF/nx125_/nx125_qr.PDF

  on cleaning the ink in the print head nozzles. In your case, the purp [ose of the exercise is to reload the path of ink and the printhead with ink.

  Tom Ferguson

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• F4580 printer keeps saying 'in paper' when paper present

  F4580 printer continues to say 'in paper' when present paper, tried to reintroduce the paper without result.

  Hi @myk249 and welcome to the Forums of HP!

  I see that you are having problems of flow.  I would like to help!

  I recommend you to perform a power reset the printer. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also suggest this paper on a "Paper jam" message for HP Officejet.  Even if the document indicates paper jam, the steps should help solve this problem.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• No characters on the paper when you print from Word or Excel

  When printing from Word and Excel - printer goes through all the steps and sounds but no ink on the page. Print test and other programs non - SM page print very well. Worked fine before (maybe 2-3 months I have used Office but print very well before)
  Windows XP and Office 2003

  Hello Allen_99,

  Thanks for visiting the site of the community of Microsoft Windows XP.  The question you have posted is related to Office and would be better suited to the office community.  Click HERE to find a community that will provide the support you want.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• print walks onto the page when printing business cards

  When I print multiple sheets of business cards printing the page begins to wander to the top of the sheet.  If I only print one page at a time, this isn't a problem.  How can I fix?   I have an Officejet Pro e8100 printer works wirelessly on a Win 7 64 bit OS Home premium.

  RickT2,

  Welcome to the HP Forum.

  If the first page prints OK and then subsequent pages tend to stick or the text wanders a bit, then perhaps adjust the media type would help.

  Assumption

  Setting the media type tells the rolls expected in what kind of paper - this could help pull the paper but at the right speed and tension to allow the text to apply to the location appropriate during each pass.

  Paper size and media Type are selected in the printing preferences:

  Control Panel > display icon > devices and printers > right click on your printer >

  Printing preferences > tab paper / quality >

  Select the paper Source > have desired / needed by printer model

  Select the paper size > have desired / necessary for the print job

  Select Support > have desired / necessary for the print job - for example: paper matte brochure for labels

  Ok

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• HP M4555, mailbox 3 bins stapling (CE736A) - does not sort the paper during printing of z/os.

  Hello

  Shortly:

  Printing from z/os on HP MFP with stapling Mailobx joint - does not sort the paper. All the paper goes to an output tray, instead of outputb different locations, depending on the configuration of the printer settings.

  With more details:

  1 device (HP LaserJet Enterprise M4555fskm MFP printers):

  2 mailbox HP stapling 3 bins of 900 sheets (CE736A)

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA3-2888EEE.PDF

  Our Organization has Mainframe, where the documents are printed (ESF printing system, language PCL).

  We have 3 print queues in Windows print - P1, P2, P3 server. All 3 have the common TCP port - at the end, there is multifunction print device: HP M4555, where we tied - sorter of stapling to the 3 bins 900 leaves HP (CE736A) and configured in this way:

  1 P1 queue prints to: upper left bin.

  2 P2 queue prints to: average left bin.

  2 P3 queue prints to: lower left bin.

  When I print the test page from windows server to P1, P2 and P3 - ir printed paper properly in appropriate output tray. But my problem is that these print jobs, coming from the Mainframe to these queues - are not sorted by bin (P1 to P2 - in the Middle, P3, Upper - Lower) - the paper goes to a location, for example - Upper (or if not configured device in Control Panel mode mailbox - Lower).

  I have fought with this problem too long and cannot be resolved.

  Driver, that is used:

  HP LaserJet M4555 MFP PCL 6.

  P2/properties/Device Settings:

  Accessory output bin: HP 3 stapler/stacker - Mailbox Mode:

  

  Output:

  

  I already tried to change the settings to:

  1 Windows print queue server settings;

  2. from the device settings (side of built-in web server);

  3. the side HP jet admin web.

  Nothing happens. For me it is too difficult, which is priority 1, 2. or 3. option, see above?

  Location:

  

  Impatience on your part.

  Andrejs Sobolevs

  Service Desk COMPUTER team

  This problem has been resolved the side Mainframe, VPS printing system. Administrator has made the installation program there. There is no need to do it on the side of the unit.

  Solved.

• HP Officejet 6100 cut the top of the page when printing

  I use a printer HP Officejet 6100 with Windows 8.  Sometimes the printer has trouble grasping the page to print. Printing starts at the top of the page - cut on top of what is being printed. Does not happen all the time, but often I have to reprint for a picture with appropriate boundaries. It's printin 4 photos per page.

  Hello Jlove25,

  Welcome to the Forums of HP Support!

  When the Officejet 6100 struggled to pick up the papers, it is another type of paper that when he goes to pick it up? "The cleaning rollers would be my first suggestion, this guide will show you the rollers to clean: a ' Out of Paper ' Error Message on the computer and the printer is not Pick Up or paper feed.

  I would like to know if the cleaning help rolls the printer print on a more consistent basis for you.

• Win 7 does not 4 x 6 paper when printing head office photo with my hp 6520

  I have paper in all trays.

  I can print to the photo tray if I use another program that allows me to access the printer properties.

  If I use a Microsoft program in Windows 7 is not an option for paper 4 x 6 as if he does not see the photo tray.

  If I said to print a picture at a size of 4 x 6 it print on plain paper from Tray 1.

  Does anyone know how to work aroun it?

  Hey ArcEnCiel.

  Normally when you select print in a Windows program, and then you are presented with the print options window.  In this window, there is a preferences or properties button.  If you click this button, then another window should open for the printer preferences.

  In this menu, you can set the paper to photo paper Type and size of 4 x 6?  In addition, you should have an option to select the Tray 1 or the Photo tray.  Are these not present options for you?

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.