HP8540w (540M) upgrade ram, won't boot past the BIOS

Similar Questions

• My Satellite C660-155 won't boot to the top

  My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

  It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
  Any advice would be greatly appreciated.

  For better understanding, you must offer more specific information.
  You can enter boot options using F8 at startup?
  Figure option fix my computer in the list?
  You can boot OS in safe mode?

  Did you create the recovery disk?

• Satellite C50 won't boot to the top

  Hello

  My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

  Thanks in advance.

  You write about Windows or BIOS password?

  In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
  Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

  What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

  Is the cooling fan may be strong at the start of the machine?

• Satellite P100-434 won't boot to the top

  Hi Ive got a Satellite P100-434 and Ive had for more than a year.

  Unfortunately today I couldn't get started.

  The power led lights up, the HARD drive makes light very briefly.
  The display lights. If she does not even there to boot in the bios.

  Any idea what the problem might be? Im hoping that the CPU or the motherboard is not fried.

  see you soon

  John

  Unless you bought the extended warranty, I don't think you have a lot of luck. My suggestion is to return to the place of purchase, if you still have warranty.

  However, try to remove the battery for 1 minute and then replace the battery again. Try it turn on.

  Also try with the power cable plugged in power and remove the battery.

  If all else fails, then you have a very expensive paper weight.

  Good luck.

• Tecra 9100 won't boot to the top

  Hello

  My Tecra 9100 will not start at all. Battery and disc hard drives light up but the machine does not illuminate and etc. cpu fan does not turn. I don't know if anything burned on the main panel, etc. that would stop it boot in the bios.

  For any help or suggestion would be appreciated.

  Thanks in advance.

  Hello Steve

  Sorry, but if there is any sort of reaction and if you are not able to enter the BIOS settings which suggest serious hardware problem. On this path, it is not possible to say what the problem is. Unfortunately I put t see any solution it and I guess the unit must be sent to the service partner.

• Acer Aspire won't boot to the top! Help please!

  Hello! I really hope you can help me on that because I don't know what to do... so this is what happened: I was playing a game heard music etc. (laptop: Acer Aspire E1 - 772G). However nothing happened, but then 2 minutes after my laptop froze and I waited patiently. After some time, he said something I don't remember and at first there was a sad Smiley biiig [ ]. downstairs he said some .sys arrested or something, I don't know... However, I turned off my phone and he did it again. Normally there must be the Acer's Logo and a Slogan just after clicking the power button, and some quarters would begin to turn around. Well this time it was no small circles and I started worrying. After like 1 Minute of waiting my screen just blacked out and 2 seconds after the logo was back once again, but without the circles. Then a black and blue message popped up, which says: "boot device by default lack or failed to initialize. Insert the recovery media"(I don't remember the rest). Well what I have tried is the following:
  ALT + F10 (absolutely no reaction)
  F8 or F12 don't know (shows me the error Code and what to do. He also says to put in my Windows installation, which I did not. I don't have any recovery media)

  After the message appeared I pressed Enter, and there was a menu where I couldn't do anything. He only told me to press any key, if I put in any recovery media. As I said I didn't, so I just close the laptop. After that, I pressed the power button to restart my laptop... Well, it was the same thing. After that, I turn it off again and tried the things I listed before. I hope you can help me, quick if possible I need my laptop for many other things that are more important than to play haha ^ ^

  I look forward to a quick response,
  iSpextor

  try to boot to the BIOS by pressing F2 at startup, check on the home page if your HARD drive is listed.

  If it listed to go to the exit of tav and choose load setup default, press F10, Save and exit

  try to start

  If you still having problem with missing starting device, your HARD drive is probably dead or having some bad problems; If you are still under warranty, please contact Acer support.

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• After the memory was updated by Satellite Pro M won't boot to the top

  I bought 2x512mb ram 1024 MB but if I put a stick in slot 2, in that my laptop will not start Windows (the bios boot and restart)
  memtest gives errors, I tried other sticks.
  they work, but if I put them in the 2 slot they give an error
  (is my slot is broken if so, how is it possible I've ever used and I know how to place the memory)
  the first time, I placed the memory I started with memory, it worked fine (I ran a memtest for about 30 minutes (everything was ok), I went and started my laptop again later.)

  I ran the memtest and there were errors

  In my opinion, you are trying to use incompatible RAM modules.
  Please use the RAM modules recommended by Toshiba

• Re: My Satellite P200 won't boot to the top

  Hi all
  Noobie here,
  I think I caused a problem wher my P200, it won't start, it was very slow and I went into the Task Manager and deleted some programs that were not running, but using the memory.
  In my view, there is a good chance I can I have deleted something that the system needs because it will not load upward.
  I turn it on and I get a light on the HARD drive to the front and a light in the dvd drive, but nothing else, I tried pressing F8 and put the recovery disc in but nothing?

  Anyone have any ideas?

  Appreciate any help.
  John

  I guess you are using the "F8" key to access Windows boot options and Windows is not to leave you. If this of * definitely * the case, then you must insert the recovery CD and change the device to boot from the screen as the laptop boot - can't remember which affects it is than its displayed on the bottom line. I think its possible that W7 can be repair o the problem and a full installation will be unnecessary

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• My desktop won't boot to the top

  My desktop won't boot up it crosses the safe mode screen, acts as if it is loading windows displays the windows screen is then empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545 TaurArian [MVP] 2005-2010 - Update Services

• Pavilion new hard drive XP Media Center Edition 2005, won't boot from the system recovery disks

  Hi, I'm trying to replace the hard drive in Pavilion a1620n a member of the family with XP Media Center Edition 2005 where the original Samsung SP2504C HDD failed.  I HAVE the original recovery discs 1 and 2 system and additional recovery disk supplied with the PC but the problem seems to be that I can't get the PC to boot from them to start the recovery process.  I installed a new Western Digital 500 GB HARD drive.  The BIOS recognizes it is installed (as well as the existing DVD - RW drive) and drive past the on-board CHIP support tests.  I tried using the Boot Menu ESC to select the DVD - RW Drive as the first Boot device, as well as the tab Boot Setup of BIOS F1 to set the 1st boot CD-ROM device group and other people with disabilities.  After reboot, the drive of DVD - RW turns on for about 2 seconds, then turns off and the display shows "DISK BOOT FAILURE", INSERT SYSTEM DISK AND press ENTER.  I thought maybe I needed a kind of bootable CD boot disk to format the drive first, so I tried a BACK 6.22 bootable CD and a bootable CD of MEMTEST, that work on the other PC, but I get the same message "DISK BOOT... "on this one.  My next idea would be to try to host the new drive on another PC and copy the files on it recovery disk... but is it really necessary?  If the own PC system recovery CD should not be able to... Recover?

  It seems to me that the ligthscribe drive has a problem.  Replace the disk and it may be OK after that.  On a PC so old, it is probably an IDE drive, but check first.

• HP LJ CP5525 won't boot if the network cable is connected.

  Hello everyone, I have a client who brought me a CP5525 for repair with an unusual problem.  The machine will not get past the initialization stage if the network cable is connected.  If the network cable is removed, the machine comes to ready.  Initially, I suspected a trainer Board bad, but instead, I get the same problem.  With the network cable is connected, the machine will not get past the initialization stage.  I know I'm the cable is good I can plug another printer in there and it works fine.  The trainer has a green light on the port of the network adapter when the cable is connected, the led "smiley face" is on the balance and the "heartbeat" light flashes twice and pauses, then blinks twice again and continues to do so, that everything seems normal.  In addition, while the machine is still being initialized, I can press the test button on the print engine and it prints a test page to the normal search.  I don't know if I should just let the machine only and see if it boots never completely, but no idea how long I have to wait, I left longer than 10 minutes and it is not always initialize.  If I unplug the network cable and allow the machine to go ready I can print a log of events and it shows no errors.  Of course, it is used as a network printer, so there need to be ready with a NETWORK cable.  At this point I have no idea what my next step should be to help or ideas would be appreciated.

  I left the nic cable disconnected and allowed the printer to come ready.  Then, I plugged the network cable and tried to install the printer on my network local test.  I ping the printer and he answers, I can't install the printer normally, but it does not print a test page.  When he goes to print the test page the printer winds up as if she warms to print, but then rolls down.  Meanwhile, the port of the network card on the machine poster in green and yellow flashing as if it receives information of the network, but there is no change on the screen and the led lights on the front panel show no change.  Finally, the print job expires and shows that printing does not.  If I try to print from microsoft word or notepad saying, I get the same symptoms.  This happens with the new Council of trainer and the original one.

  Here in the building, we have an another CP5525 installed as a network printer that works very well, I went and printed its configuration and settings page and compared to the printer, I'm working on and they are identical, with the exception of IP addresses of course.  At this point, I have the printer pushed to the side until I can get some ideas of what we must look at the next and I worked on other printers and used this same nic cable to test these machines and they print very well so I know that the problem is related to this printer.  I just need some ideas of what we seek to the next.  I removed the back cover and looked for loose cables and so on.  These machines are newer than most of the equipment that I service so I don't have any spare part for them so I can't start just you order parts at random just to Exchange and see what happens, so if anyone has an idea, I would be very grateful.  The machine is out of warranty at this stage.  Apparently, he was never installed and was sitting on the shelf for the past two years and tried to install it a few weeks ago.

  Two points here. First you move the hard drive to the new trainers, so if the hard drive is the problem you can not say. You have to 'borrow' a hard drive to an another base printer if you have another of the same model. Second by assigning the same network address of the printer if there is a problem with the print server on the base or the driver you are using is bad no way to tell. As I said in my post, you need to isolate your network printer and need to load on a virgin machine where you use any driver laser jet color printer that is built into the operating system, such as the printer color laserjet 5500. My gut tells me the problem is with the network and using the crossover cable confirm this. The fact that the printer is ready and you can print without the cable connected network tells me this. Thing that you can do with the printer NOT connected to the network, ping the ip address. It is possible that some other piece of equipment on the network took somehow this ip address and causes all sorts of havoc with your problem.  Now regarding the update of the firmware.  I'm sure that you have a computer at home that does not restrict the usb port.  Just take a USB key to your computer at home and put a picture of the ORL file on the USB at home and bring to the office and just that insert the drive into the USB printers and turn on the printer and it should ask if you want to load the updated file.  Either way, which base?  I'm retired U.S. Army more than 20 years ago.

• My laptop Satellite A100-147 won't boot to the top

  my computer laptop satellite does not start until past the screen "in contact with toshiba" unless I press and hold zero and the power button

  Can you please tell us which model of laptop you have exactly and what happens when you press the button walk / stop?
  Don t hold anything, just turn it on laptop and describe what is happening exactly?
  What operating system is preinstalled on this satellite notebook?

• Satellite A30 won't boot to the top

  My computer does not start at the top. Yesterday, I had the blue screen but then restarted and everything was OK. Woke up this morning to the computer does not start. I have a Toshiba Satellite A30. I got the Toshiba screen, then the black screen to choose 'Start normally', 'last good settings', 'safe mode', "safe mode with network" etc.

  I chose normal startup, then I get the Windows XP screen with the blue bar. When that has been loaded, he went back to the initial screen for Toshiba and then continues to repeat. I also tried safe mode, but that charge or the other.

  What should I do? I don't want to erase the hard drive because there a lot of important data (family photos, work) etc. Please help me

  Thank you!

  You can remove the HARD 2.5 laptop drive and you can connect it via USB to another PC. Then you may be able to save any important files.
  After this procedure the plug back in the HARD drive and boot from the recovery CD to reinstall the OS.