HPG6 1313AX

Similar Questions

• HP Pavilion 1313ax g6: Wireless works do not, impossible to install ralink driver.

  I have recently reinstalled Windows on my laptop, HP pavilion 1313ax g6. Once I did, I noticed that the wifi was not working. I opened the device management and he had yellow exclamation points on Ethernet controller, network controller, PCI Device and SM Bus controller. I thought it was a driver problem, so I downloaded the driver from the HP Web site but nothing helped. The pilot was not installing. She opens the configuration wizard and close abruptly. Then, nothing happened. I downloaded the driver from the website of Mediatek too and the installation process has completed, but there is that still no change in Device Manager isn't the visible map in the settings of the adapter in the control panel network and sharing Center.

  Any help would be greatly appreciated.  I have this very urgent need.

  Hello:

  According to the list of parts for your laptop, it comes with a combination of Atheros 802.11b/g/n 1 x 1 9485GN adapter WiFi and Bluetooth 4.0 3012.

  http://PartSurfer.HP.com/search.aspx?SearchText=A9R40PA

  This would explain why the Ralink WiFi adapter driver does not work.

  You need these drivers for the Atheros card bluetooth and wireless...

  This package contains drivers for the supported Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp54972.exe

  This package contains the driver for the Atheros Bluetooth installation package in the notebook models and operating systems.

  File name: sp55714.exe

  Ethenet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55083.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55085.exe

  SMBus Controller:

  I zipped and tied the smbus controller driver you need below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• RAM max HPG6-2249wm

  Thinking of buying a HP G6-2249WM, but I don't want to upgrade RAM.  Does anyone know the RAM max that will support this computer?  Product card state that it has 6GB I DIMM with 2 locations that are accessible to the user.

  Hello

  Max RAM 8 GB (2 x 4) SODIMM DDR3 Non - ECC 1.5 v, unbuffered memory

  Manual

  http://h10032.www1.HP.com/CTG/manual/c03593126

  http://www.kingston.com/en/memory/search/Default.aspx?DeviceType=3&Mfr=HEW&Line=Pavilion%20Notebook&Model=82077&Description=Kingston_System_Specific_Memory_for_HEW_Pavilion_Notebook_HP/Compaq_-_Pavilion_Notebook_g6-2249wm

  Concerning

• HPG6: password administration

  After three attempts to error message. 51180828,
  Thanks again
  a szigatti

  Once again, thank you, you people are invaluable. best regards, nick szigatti

• Is to install a large number of programs slow down a laptop

  I use HPg6-1004TX. I have a lot of program installed on my laptop (nearly 150). Is it slow down down/slow down my laptop? Thanks in advance!

  Without a doubt!     Especially if the program starts a process every time that you start Windows.   I suggest to use Control Panel to uninstall programs you no longer use.

• A new SSD drive recovery

  I just bought a new EliteBook 8770w and an SSD and I wanted to replace the primary HARD drive, so I created a with the tool HP recovery disk.

  But when I swap the drives and put only the new SSD and press F11 when starting, no recovery Manager starts.

  If I try to boot from the first CD of backup, Windows 7 installation starts. Any idea what's going on here?

  1. can I attach two disks and run Recovery Manager from the original windows and restore it on the second (SSD)?

  2 - is the best way to change the primary HARD disk?

  Hello

  a few days before I bought laptop hpG6 with mechanical disc, and I bought an ssd

  I photographed the entire disk (4 sheets) by acronis true image before doing something.

  then I photographed on SSD, and everything is OK.

  true image can deal with the other disk sizes.but Ghost not.

• my hard drive is 303 dead and I don't have recovery

  HP pavlion 1313ax g6

  Hello

  Regarding replace HARD drive, drive on the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Regarding the reinstallation of the operating system on the new HARD drive, there are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 you can use the following method to create your own family Windows 7 Edition installation disk basic 64-bit.

  Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 64-bit - the source of the Windows Image is Digital River.).

  Windows 7 Home Premium SP1 64-bit

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer.

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once done, use an application like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You could possibly need for your laptop can be found, additional drivers and software here.

  Kind regards

  DP - K

• Cannot open my bluetooth after OS upgrade

  HP g6-2016tx

  Windows 8.1

  I can't open "my bluetooth" or turn on the bluetooth on my laptop because I upgraded my pc to windows 7. Help, please.

  Hello HPg6-2016tx,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand the Bluetooth does not work on this computer since upgrade to Windows 8.1. I'll see what I can do to help you!

  First of all, you should know this computer does not support Bluetooth for Windows 8.1 drivers. This is indicated on this site: drivers PC laptop HP Pavilion g6-2016tx

  If you want to use Bluetooth on this computer, you must return the computer to Windows 7 or 8. An alternative solution is to buy a Bluetooth adapter. They allow you to use Bluetooth on your computer.

  Please let me know your results. Thank you for bringing This problem on the HP Forums! Have a great day!

  Mario

• The Activation of Windows 8 failed after BIOS update

  I have a HP Pavilion G6 1313AX laptop with windows 7 Home Basic preinstalled on it.
  I've updated that Windows 8 pro with Wizard upgrade of windows 8.
  After that, I did a BIOS update. Then when I restart, the windows that display an error that the product key was used in some other PC.
  Please help me to solve this problem of activation.

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.