HPLJ P1102w: P1102w HPLJ two of the three

Similar Questions

• Tecra S2: HDD as unknown device on two of the three USB ports

  Hey again,
  I thought then that I was here anyway I could ask this too.
  The tecra S2 has 3 USB ports, they all work very well for my USB mouse and other small things like the wacom tablet...
  But when I plug my external hard drive in two of them, it says that it is an unknown device...

  I think, but am not sure, that this might have something to do with something once, we had to do in school;
  We had once set up a pilot for a small converted Converter a series (or parallel, cant he recall) cable to the usb port
  (I have already uninstalled the drivers but nothing has changed)

  It's just a guess...

  any idea on how to solve this little problem? : p

  Hello

  You said external USB HDD appears as an unknown device on two of the three USB ports.
  What appears if you connect the HARD drive to the USB port on third?
  It appears as an unknown device or what?

  The device usually appears as an unknown device in device because manager not installed device drivers.
  I check the HARD disk for the drivers and try to install it again.

• How can I remove two of the three search bars - now appear on my screen

  When I go to Mozilla firefox, somehow (and I guess I made the mistake). It appears 3 three bars of 'search '... Obviously, I need only one (1)... How can I remove two of the three bars "get"?

  Hello

  You should check with the Support of FireFox and their forums.

  Support for Firefox
  http://support.Mozilla.com/en-us/KB/

  Firefox - community and live Chat
  http://support.Mozilla.com/en-us/KB/ask

  Firefox - Forums
  http://support.Mozilla.com/en-us/questions

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Two of the three USB ports does not.

  Two of the three USB ports on my laptop have stopped working today for no apparent reason. I had nothing new plugged in, I was not something out of the norm with my machine, but the mouse does not work all of a sudden. I swapped on the keyboard and the mouse and the mouse was fine, but the keyboard works not so it's not the device. I ran a diagnostic care on port vaio, he said that there was no problem. Any ideas?

  Hello

  Perform the steps from the link below and see if it helps.

  Tips for solving problems of USB devices

  Hope this information helps.

• Two of the three USB ports works only on Compaq CQ71 (Windows 7).

  Hi, I have a Compaq Presario CQ71.

  There is a USB port on the left and two on the right. The one on the left works but the two on the right are not.  An "unrecognized" message when you use one of them, but not with each other, however there is power coming from him, as when I plug a mouse to infrared light is turned on.
  Ive updated Chipset drivers and BIOS on Compaq website. I also made sure to do all the updates of Windows. Help, please! Its driving me crazy!

  Did you meet a very old thread... but... I know that with some machines, you can actually disable some ports USB in the BIOS. Take a look here and see if there's anything out there.

• Satellite U400 - two of the three USB ports are not working

  Hello

  I have laptop Satellite U400 who has three USB ports.
  One of these 3 ports does not work correctly and the other two ports do not work.
  Is there anyone to show me any solution?

  Thanks in advance,
  Concerning

  Any solution? You mean a magical solution? :)

  No one knows the configuration of the laptop.
  No one knows what OS you are using.
  Nobody knows what you did last time with your laptop.
  No one knows how long you have this problem.
  No one knows what are the USB devices that you use to test USB functionality.
  What you have already tried to do about it?

  You want to have more questions?
  Maybe you should write more than three short sentences as a description of the problem.

• How can I disable two of the three box?

  Hello...

  I have a box 3. I would like to disable the other two when one of them is enabled so I can allow only one and not two or three.

  Can someone help me?

  Thank you.

  Yes, I tried to follow your request which is to disable the checkboxes unchecked.  I now understand that you wanted to really just to deselect.  The following should work...

  CB1.addEventListener (MouseEvent.CLICK, updateCheckBox);
  CB2.addEventListener (MouseEvent.CLICK, updateCheckBox);
  CB3.addEventListener (MouseEvent.CLICK, updateCheckBox);

  private void updateCheckBox (e:MouseEvent): void
  {
  var cb:CheckBox = CheckBox (e.currentTarget);
  CB1. Selected = false;
  CB2. Selected = false;
  CB3. Selected = false;
  CB. Selected = true;
  }

  What makes them behave exactly as would a group of radio buttons.  Maybe your problem with do not receive radio buttons to work was that you didn't assign them as a group.

• my laptop does not recognize two of the three partitions. They show as NTFS only

  then, when I open the tab of the computer to look at my hard drives. He initially present with three hard drives with bars informing me of the ive of space used and the space that is open. now, it comes with the hard drive of 1 have the information bar and 2 and 3 have only NTFS letters with no bar. However earlier when I start my computer all hard drives would have the info. bar below them up to what I would like to access. shortly after, they would disappear off the screen (everything that would be in the area a hard drive, an and an another device. HDD 2 and 3 would be same there to click on). I restarted my computer a couple of times now.i have been researching running a diagnosis with little result. If tried looking for more on that NTFS is with little result. I tried analyzing and defraging the hard drives, but disappears shortly after the start to the top. Ive tried vibrions a search and correction program that is located in the Properties menu of hard disks. I ckecked the connection of hard disks of the computer, making sure that they are connected correctly (they are).

  and because of this problem I bought an external hard drive and I'm trying to save what I left on my computer. However it is said that the backup has expired after so long. What is also gives me grey hair.

  hit me if you have any other questions

  Hi Gadlington,

  Have you done a recent software or hardware changes to the system?

  You can check the article and if it helps to solve the problem:

  My drive does not appear in Windows Explorer

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

• I just took three photos with the iPhone 5.  Only two of the pictures now appear on my iMac.  What happened to the third picture?

  I just took three pictures with my iPhone, and only two of the photos were sent to my iMac.  What happened to the third picture?

  Sorry, but we cannot see you then you will need to provide us with information - not only an abstract problem

  Wigh no information my guess is the time and the third photos may not be synchronized with the time

  LN

• Mac p1102w no 'HTMLConfig' in the community more

  Following the first time wireless setup instructions, I can't go to the wireless user interface configuration via USB.  I can add the printer, but there is HTMLConfig button click on in the print settings, which means that I can not configure the wireless.

  Any ideas?

  Hi rslifka

  I understand that you are away from the utility tab.

  Here's how to access the utility in a different way.
  
  Access the drive hard Mac, library, printers, hp, laserjet,
  
  P1100_P1560_P1600Series, open htmlconfig. Access the network
  
  tab, select Wireless on the left side, select
  
  infrastructure, network selection, select double
  
  arrow button to move the network left name
  
  side, find the passwords, apply. You should get a solid blue
  
  lighting wireless in about 1 minute.
  
  (Note: If the configuration html does not load, you need to)
  
  updated the firmware of the printer with usb connection)
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?
  
  softwareitem = bi-115797-
  
  2 & cc = us & dlc = en & lc = en & os = 4114 & product = 4110396 & sw_lang =
  
  
  
  Then go into the Apple, system preferences, print them out and scan.
  
  Highlight the P1102w and click on the sign less bottom left
  
  corner to delete, and then disconnect the usb cable, click on more
  
  signed lower left and highlight the Hello P1102w
  
  printer and click the Add button.
  
  
  
  Test printing.

  Let me know if this helped.

• Unable to access Internet Explorer under two of the five profiles on the same computer

  I have 5 profiles set up on my computer, one for each Member of the family.  When I try to access Internet Explorer or Word in two of the profiles I am unable to run the command.  Both applications work as they always have under the other three profiles.  I double click on and 'Open with' dialog box appears with "Recommended programs."  The only option in this area is "Internet Explorer". I select the option and click on , but I find myself in a continuous loop with the "Open with" dialog box  When I finally click I get an another dialog asking me to save or run "ssvagent.exe." I am able to cancel out, but I can't even open either application.  If I select I can open the document in word, but I can't access Word from the options menu or the shortcut I used last year.  I ran a virus scan today and 5 cases have been detected and removed.  I ran the scan under 5 profiles, but now I can't access BitDefender (my virus scan) under either of the two affected profiles.  Please notify. Henry

  Hello

  Try scanning from the utilities included in the link, how to get rid of malware and let us know what happens.

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Concerning
  Anthony.

• Formula for dividing the three entries from field (D = A/B/C)

  I have a formula to get a value, and this is to divide the three entries from field. I don't know enough about javascript to correctly enter the code to make this happen. I have 20 rows in a form and I need to calculate column D I saw a thread on how to divide the two fields, but I need to go further with it. Can someone help me? I added that I was working (left) and I tried to develop (right).

  Internet

  Personal

  establish the variables for the names of fields for the dividend and the divisor. var sDividend = ' domain name my dividends. " var sDivisor = 'name of the My divisor field. " get the value of the divisor field var nDivisor = this.getField ("sDivisor") .value; get the value of the dividend field var nDividend = this.getField('sDividend').vlalue; do not modify the code under this line Clear the value of the result field

  Event.value = ";

  see if we have a divisor of zero

  If (nDivisor! = 0) {}

  We can then divide

  Event.Value = nDividend / nDivisor;

  } / / end of calculation of the division

  The above assumes that you are dividing the value of the 2 fields.

  Assignment of the variables

  var PW1 = "PlotWt1";

  var WBC1 = "WetbuConversion1";

  var AF1 = "Acre Factor1";

  Get the values

  var nPW1 = this.getField (PW1) .value;

  var nWBC1 = this.getField ("WBC1") .value;

  FNa1 var = this.getField (AF1) .value;

  Clear the value of the result field

  Event.Value ="";

  see if we have a divisor of zero

  If (nWBC1! = 0) {}

  //Actual division operation

  event.value = nPW1 / nWBC1 / FNa1;

  } / / end of the calculation of the division

  Change the line of code:

  If (nWBC1! = 0 & nAFN! = 0) {}

  If you want to use the same calculation for a number of lines, you can create a function that all calculated fields can use, but it depends on the names of the fields that you use. If you are simply changing the number at the end, the function might be:

  function calc1(num) {
  
      // Assigning the variables
      var PW = "PlotWt" + num;
      var WBC = "WetbuConversion" + num;
      var AF = "AcreFactor1" + num;
  
      // Getting the values
      var nPW = this.getField(PW).value;
      var nWBC = this.getField(WBC).value;
      var nAF = this.getField(AF).value;
  
      // clear the result field value
      event.value="";
  
      // see if we have a non-zero divisor
      if (nWBC !=0 && nAF != 0) {
          //Actual division operation
          event.value = nPW / nWBC / nAF;
      }
  
  }
  

  You can then call it in the custom calculation of the field as the script:

  Calc1 (1);  Rank 1

  For line #5, it would be:

  Calc1 (5);  Rank 5

  This could be simplified a bit if you have changed your domain naming scheme to make it easier to extract the line number. In this way, that you wouldn't have to pass as I showed.

  To create a script at the level of the document to place the function, select: Advanced > Document Processing > Document JavaScripts > Add

• Can I re - set tabs in the "New Tab Page"? I deleted all bookmarks in two of the nine "tabs". Can I re - define these?

  This new tab page allows to store the new bookmarks, right? But I was hoping to return to a bookmark that I jumped, so I pressed on remove again and again until the screen on two of the nine just went completely blank, and now I can't drag a bookmark for them. If I drag a bookmark to one of them, or anywhere else on the page, nothing is saved to the "new tab page", it opens just this bookmark. I don't know what I'm doing wrong. I have the window "Show all bookmarks" open. I'm puzzled.

  Hello

  Please try this: open a bookmark and drag its icon site (on the left side of the address bar (address)), hold it on the newtab tab and when it opens, release it on a blank thumbnail.

  New tab Page

  Troubleshooting

  If the problem persists, you can also reset Firefox and start over.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.