HTML SPRY CS4 Scrollable data set (Frames)?

Similar Questions

• Spry data set question

  I have a question to anyone who is familiar with the data sets spry - a link below for the example I use:

  http://www.thecreativeadvantage.com/clientzone/ca_portfolio_test/print.html

  The source of the dataset is:

  http://www.thecreativeadvantage.com/clientzone/ca_portfolio_test/print_source.html

  ----------------------------------------------------------------

  My question is:

  Is it possible to make the first button appear 'active' when the page opens. For example, each button corresponds to a State of 'Black' when it is not active, a reddish "stable" condition and a dark gray "active" State. All the buttons are black 'inactive' when the page opens, but the first description of the image and it is visible, then I would be the first button to appear 'active' (gray dark instead of black).

  The way it is now, if you click the first link after the page opens, the button changes to the 'active' State and/or colour, but its content does not change it looks like a mistake...

  Any help would be greatly appreciated - Please note: this is a demo page, I'm trying, please disregard the appearance and content - just trying to get the feature...

  Thank you very much!

  Jesse

  ----------------------------------------------------------------

  The associated style sheet is less necessary:

  @charset "UTF-8";

  / * SpryMasterDetail.css * /.

  / * Copyright (c) 2007. Adobe Systems Incorporated. All rights reserved. */

  / * This is the selector for the main container of master-detail structure.
  *
  * If you want to limit the width of the structure, master-detail, set a width on
  * the master/detail container. By default, our structure expands horizontally to fill
  * a space available.
  */
  . MasterDetail
  {
  font: 12px Verdana, Geneva, without serif.
  margin: 2px;
  }

  / * This is the selector for the master container element that houses all the MasterColumn
  * classes. By default the column Captain occupy about 35% of the width of the
  * whole structure.
  */
  . MasterDetail. MasterContainer
  {
  background-color: #cccccc;
  border: 1px solid gray;
  Width: 250px;

  float: left;
  overflow: hidden;
  }

  / * This is the selector for an element master column that contains data for
  * a main column.
  */
  . MasterDetail. MasterColumn
  {
  do-size: 11px;
  
  / * background-color: #000000; * /
  Background: url (.. / images/rollover.gif) no-repeat;
  text-indent: 20px;
  color: white;
  Width: 250px;
  height: 10px;
  padding: 5px;
  cursor: pointer;
  }

  / * This is the selector for an element highlighted in the main column.
  */
  . MasterDetail. MasterColumnHover
  {
  / * background-color: #1e1e1e; * /
  Background: url (.. / images/rollover.gif)-250px 0px;
  color: white;
  
  }

  
  / * This is the selector for an element selected in the main column.
  */
  . MasterDetail. MasterColumnSelected
  {
  / * background-color: #464646; * /
  Background: url (.. / images/rollover.gif)-500 px 0px;
  color: white;
  }

  / * This is the selector for the element of retail container containing all the DetailColumn
  * classes. By default, the Details column occupy about 60% of the width of the
  * whole structure.
  */
  . MasterDetail. DetailContainer
  {
  border: 1px solid gray;
  background-color: #ffffff;
  padding: 10px;
  Width: 500px;
  / * float: right; * /
  
  overflow: auto;
  }

  / * This is the selector for an element of detail column that contains data for
  * a detail column.
  */
  . MasterDetail. DetailColumn
  {
  margin-bottom: 1px;
  }

  I could be wrong, and right, you might get your answer here, but isn't the Spry forum here >?

• Spry data set

  I watched the two videos and it looks very simple and easy create a Spry data set. I imported my CSV data into a table in a table and have an html page showing all my data in a table like in the videos. When I start the process of 'Insert Spry Dataset' I select this html table as my data file, I get an error message that says: it takes a unique id. Although no other information I looked at including two videos say is that 'unique id' or how to create one or the fact that I really need one. The exact error message is "no selectable items found. Make sure that you have assigned ID for the items you want to select. I even created a table from scratch, thinking imports has created a problem. Same error message and the result. Read the help file basically said the same thing. I found nothing that says what he meant by "unique id".
  
  TIA
  

  two

  tags at the beginning of the code with only a closingat the end.

  Change

  TO

  Or convert the table to xml and use xml DataSet

• Scroll Spry data set?

  I have a large set of data created with Spry in Dreamweaver CS6 and want to scroll in rows.  Put a Div inside the data set and adding the overflow/ScrollBars property adds a scroll bar that includes the header of the data set and who is compensated.  Is it possible to create a scroll bar that scrolls all lines except the header and is not compensated for that?

  Table of vertical Scrolling.

  Fixed the Table header - http://alt-web.com/

  Nancy O.

• Hand cursor with the line of the Spry data set

  I carefully built a Spry - a table - with a corresponding region of detail data set, following the instructions in the Adobe video workshop. Everything works, including the row headers clickable to use lines and activation of the changes in the retail area. BUT I can't get the hand cursor appears (at the place of arrow or the sliders of the i-beam) on interactive areas. Tried creating null links (href = "#") to activate the hot words (it works) but which causes actual links on the page to insert the root of my site in front of the URL to other sites.
  Here's the example page
  I looked at the code on the model and may not know what I am doing wrong.
  
  Help! and thank you.

  I carefully built a Spry - a table - with a corresponding region of detail data set, following the instructions in the Adobe video workshop. Everything works, including the row headers clickable to use lines and activation of the changes in the retail area. BUT I can't get the hand cursor appears (at the place of arrow or the sliders of the i-beam) on interactive areas. Tried creating null links (href = "#") to activate the hot words (it works) but which causes actual links on the page to insert the root of my site in front of the URL to other sites.
  Here's the example page
  I looked at the code on the model and may not know what I am doing wrong.

  Help! and thank you.

• Numbers automatically linking data sets

  Hello

  I have problems with parts of the data sets are grouped automatically by numbers (3.5) when I don't want that to happen.

  I found that number is automatically grouping different sets of data in groups of six. For example, condition 7 is grouped with condition 1, condition 8 with condition 2 and so on. I initially found it frustrating, because when trying to make a data chart, terms of 7 and 1 colors are the same, like 8 and 2, 9 and 3 conditions and so on. But when you try to change the color of groups to distinguish them individually (really annoying for large sets of data), numbers automatically change the color of the corresponding group as well (i.e. groups 1 and 7 are both blue color, and to differentiate them, I change group 1 to black.) Group 7 then also instantly changes to black). It's extremely frustrating.

  Is there a default setting that I can change so that never conditions are combined unless I have specifically to group them? It seems really odd that this defect exists in the first place.

  Thanks in advance.

  It is difficult to view the problem from your description (a screenshot would help), but it seems you have trouble getting a graph to look right. You can try clicking on it, then the rectangle to change data references, then experiment with this change in the lower left corner of the window of numbers:

  

  SG

• Can I make my table to DataSet table 3d 2D data set?

  Hello.  I'm putting my data in a 3D Board.  I'm not really satisfied with the table 3D data set since that requires a large amount of manipulation of the table whenever I want to do something with the data - I do a lot of analysis, it's a pain.  It is reliable, but it takes space BD and is generally a pain.  I read here (post #6 & #7 if the link don't you shoot directly to it) a few messages by some respected LabVIEW guru they didn't see no reason to 3D tables used.  I was hoping someone might be able to point to a better solution to know how to store and access my data logically.

  I'm n channels of data acquisition (a while but I have will add to this later), that puts me in a table 2D with each line being the channel and the columns are the data points.

  I need to acquire multiple test runs a data value.

  I also need using data in each series of tests, average averages and check the test medium-sized operating are with a tolerance of the average general.

  I also need to be able to revive one of the test tracks if its average does not fall within the tolerance of the average general.

  I use the page in 3D as the series of tests table.  If I can then get some tests, I want to by selecting the corresponding page.

  I'm waiting to save all the test runs at the same time until the user selects to save the data.  Which means that the user has run the minimum number of test runs, and all have averages that fall within the tolerance of the average general.  I love this soley because this test will be carried out different several times for different of UUT and all data for this USE can be saved in a single file.

  I am currently save the file as a binary file (for my purposes of data backup) and then the user can also choose to save it in Excel, with each test on its own sheet.

  I thought to save after each race.  I don't know how add/replace the data in the binary file. I would rather not a separate binary file for each set of tests, but it's not a dealbreaker.

  The only way I see to avoid the 3D Board is back up after each series of tests.  This would mean that I would have a lot more handling of file (when they should be replaced, when the averages should be analyzed, etc..).

  Is the "save after each test cycle" approach that is generally used?  If so, it seems to me that file manipulation would be more prone to error than the manipulation of table 3D (maybe just for me I guess). Can someone tell me otherwise?

  Is there another approach that I have not thought or discovered here?

  Thank you

  Scott

  I think that save after each test cycle is a safer and more reliable way to accomplish what trying to boot of all data and recording at the same time.  This way, if the program crashes, you don't lose all the data because it was still in memory.  The data had been collected so far are safely in a file.  Why do you think of file manipulation would be more subject?

  If you want to add an existing file, then you just use the position to set the file to set the pointer to file at the end of the file, after you open the file.

  You can also watch the TDMS file format because it has means of sorting and organization of several sets of data.

• How to determine the size of the binary file data set

  Hi all

  I write specific sets of data in table in a binary file, by adding each time so the file grows a set of data for each write operation.  I use the set file position function to make sure that I'm at the end of the file each time.

  When I read the file, I want to read only the last 25 data sets (or numbers).  To do this, I thought using the position set file to set the file position where it was 25 sets of data from the end.  Math easy, right?  Apparently not.

  Well, as I was collecting data file size as I began the initial tet run, I find the size of the file (using file order size and get number of bytes so) as the size increases the same amount every time.  My size and the format of my data being written is the same every time, a series of four numbers double precision.

  I get increments are as follows, after the first write - 44 bytes, after 2nd - 52 bytes, 3 - 52 bytes, bytes 44 4th, 5th - 52 bytes, 6 - 52 bytes, 7th - 44 bytes and it seems to continue this trend in the future.

  Why each write operation would be identical in size of bytes.  This means that my basic math for the determination of the poistion of correct file to read only the last 25 sets of data won't be easy, and if somewhere along the line after I've accumulated hundreds or thousands of data sets, what happens if the model changes.

  Any help on why this occurs or on a working method, all about the problem would be much appreciated.

  Thank you

  Doug

  
  

• Import of lvm to express signal does not lead to consistent data set

  When you import a file of lvm captured in a VI, SignalExpress visualizes as dozens of data points separated rather than a set of waveform data. Anyone know if there is a problem with the way I am that capture/storage of the data, or is - what a questions at the end of SignalExpress with handling data? One of the files of lvm header is shown below:

  LabVIEW measurement
  Writer_Version 2
  Reader_Version 1
  Tab splitter
  Decimal_Separator.
  No. Multi_Headings
  X_Columns one
  Time_Pref Relative

  Thank you

  Andy

  p.s. that's using LabVIEW 8.6 and SignalExpress 3.0

  Hi Andy,.

  I opened file lvm in Signal Express and saw the same thing you knew. I had a look in the file in the header properties and noticed that the number of samples has been set to 1. I've changed that to 1276 like you who have many data points and they are all now showing on one data set. So, it seems that is trying to create a set of data for each data item in the file lvm. Try changing the number of samples in 1276 and let me know if this is the correct waveform, you need to see.

  Kind regards

  Jas.W

• How to calculate daily, hourly average for the very large data set?

  Some_Timestamp	"Parameter1"	Parameter2
  1 JANUARY 2015 02:00. 00:000000 AM - 07:00	2341.4534	676341.4534
  1 JANUARY 2015 02:00. 01:000000 AM - 07:00	2341.4533	676341.3
  1 JANUARY 2015 03:04. 01:000000 PM - 07:00	5332.3533	676341.53
  1 JANUARY 2015 03:00. 01:000046 PM - 07:00	23.34	36434.4345
  JANUARY 2, 2015 05:06.01:000236 AM - 07:00	352.33	43543.4353
  JANUARY 2, 2015 09:00. 01:000026 AM - 07:00	234.45	3453.54
  3 FEBRUARY 2015 10:00. 01:000026 PM - 07:00	3423.353	4634.45
  FEBRUARY 4, 2015 11:08. 01:000026 AM - 07:00	324.35325	34534.53

  We have data as above a table and we want to calculate all the days, the hourly average for large data set (almost 100 million).  Is it possible to use the sql functions of analysis for better performance instead of the ordinary average and group of?  Or any other way better performance?

  Don't know if that works better, but instead of using to_char, you could use trunc. Try something like this:

  select
      trunc(some_timestamp,'DD'),
      avg(parameter1)
  from
     bigtable
  where
     some_timestamp between systimestamp-180 and systimestamp
  group by
     trunc(some_timestamp,'DD');
  

  Hope that helps,

  dhalek

• Update of data sets

  Hello

  is it possible to update the data sets? I can record the visibility to data sets variables. But if add new objects to the Commission, I can add visibility to existing data sets?

  Of course, he has the small menu in the variable box.

• Using geocoded in a map based on a vision where two data sets are joined

  Hello

  I would like to create a map based on a view in which two sets of data are joined, where one of the data sets has a column of geocoding.

  Unfortunately this does not work... It seems that a custom view where two sets of data are gathered together where one of them has a geocode column makes the invisible geocode column for the component of the map.

  The following cases work, but we like to combine so that we can combine the different sets of data in the Studio without using the Integrator:

  
  

  -I can create a custom view in which we join two sets of data > the view can be used as a source for component but not the component card (it seems that the geocode column is not found)

  -I can create a custom with a geocode inside column view and that can serve as the source for a map

  What I would like to show, it is that it is possbile to have a data sets from a source system and it's easy to combine an another excel sheet with geo-information and maybe another sheet with different measures of excel. This should be possible since you can collect different sets of data in a custom view.

  Thanks in advance,

  Richard

  Hi Richard

  In regards to my reading of your EQL, I think you can try to rename the "Particulars" to "Endeca_Klanten.Coordinaten" column in the select clause of Omzet_Geo.

  Although not quite elegant, map requires the geo attribute to have the same name (key attribute, no nickname) as the base view, at least that the custom view will not be picked up by card.

  Please have a try.

  Concerning

  Alex

• presentation of the State - side by side data sets

  Hello together,

  Unfortunately I couldn t find a solution to my problem in the forum.

  So I start a new discussion.

  I want to change the presentation of a report.

  The default layout looks like this:

  data set 1

  data set 2

  DataSet 3

  DataSet 4

  data set 5

  DataSet 6

  DataSet 7

  I would like to change the layout like this:

  DataSet dataset DataSet 1 3 2

  DataSet dataset DataSet 4 6 5

  DataSet 7

  Data sets should be placed side by side.

  Is it possible?

  Thanks in advance,

  Patrick

  PatrickL says:

  Hello together,

  Unfortunately I couldn t find a solution to my problem in the forum.

  So I start a new discussion.

  I want to change the presentation of a report.

  The default layout looks like this:

  data set 1

  data set 2

  DataSet 3

  DataSet 4

  data set 5

  DataSet 6

  DataSet 7

  I would like to change the layout like this:

  DataSet dataset DataSet 1 3 2

  DataSet dataset DataSet 4 6 5

  DataSet 7

  Data sets should be placed side by side.

  Is it possible?

  Always include the information referred to in the Re: how to get the answers from the forum by asking a question.

  This can be done by using a standard report with custom report and CSS model.

• Several data sets with SetFieldValues

  Here is a simplified version of what I'm trying to do.

  I have two drop-down menus. Each has 3 different options.

  • Drop 1 - Apple, banana, strawberry.
  • 2 - clock, window, door drop.

  I have a field of text next to each drop down.

  • Drop-down list 1 - 'colorfield' is the name of the corresponding text field
  • 2 - drop "shapefield" is the name of the corresponding text field

  I want that text from the fields to fill what is selected in the drop-down lists. I can get everyone to work separately, but when I add the script for both, only continues to operate.

  Here's what I have.

  Doc Javascript

  // Data Set 1
  var oneData = {
         "Apple": {
          color: "red"
      },
          "Banana": {
          color: "yellow"
      },
          "Strawberry": {
          color: "red"
      },
    };
  // Data Set 2
  var twoData = {
          "Clock": {
          shape: "round"
      },
          "Window": {
          shape: "square"
      },
          "Door": {
          shape: "rectangle"
      },
   };
  // Populate fields function 1    
  function SetFieldValues(fruit) {
      this.getField("colorfield").value = oneData[fruit].color;
  }
  // Populate fields function 2    
  function SetFieldValues(objects) {
      this.getField("shapefield").value = twoData[objects].shape;
  }
  

  Custom script knocks on combo 1

  if (event.willCommit) {
      if (event.value == " ") this.resetForm(["colorfield"]);
      else SetFieldValues(event.value);
  }
  

  Custom script knocks on combo 2

  if (event.willCommit) {
      if (event.value == " ") this.resetForm(["shapefield"]);
      else SetFieldValues(event.value);
  }
  

  Thank you!

  There is a reason, it is not a name of keyword that already exist, the computer program is not smart enough to determine who you mean. It goes the same for function names. You have 2 functions with exactly the same name but each run another block of code. The usual way that a program solves this dilemma is to use the last definition of the function. You must uniquely name functions of your "SetFieldValues".

• BI Publisher settings when using the OBIEE analysis as the data set

  Hello world
  
  I've created a BEEP report with an existing OBIEE analysis as all data in the data model. I'm stuck with parameters.
  
  In modeling data for BEEP Guide, section 2.8.1 the following text is displayed: "settings and the list of values are inherited from the analysis of BI and they display running." BI analysis must have default values defined for the filter variables. »

  
  

  When he says of parameters and LOV is inherited from the analysis of BI, what is he referring to OBIEE analysis? And when he says "'filter variables" what is it referring to the analysis of OBIEE? " What should I do on the side of the OBIEE analysis, to activate the settings side BEEP report...?

  
  

  Thank you
  

  I managed to get this working. The documentation is very vague. The BEEP report gets the parameters 'default' and LOV based on the presentation and the column variable in OBIEE analysis he uses as a data set. You can't see these variables as parameters on the BEEP report presentation.

  If you need to use variables of presentation on OBIEE analysis, with a default value. Then create the report BEEP with this analysis, as the set of data. Don't create settings on the side TONE. The BEEP report on a dashboard and there you go, the BEEP report data will be filtered according to the value of the variable of presentation.