http data view connection

Similar Questions

• View connection Server 5.0 running?

  I would like to know exactly how server connection works in VMware View environment.

  My understanding of the connection to the server

  (1) authenticates the user

  (2) the connection between the client and the virtual desktop negotiating

  (3) transfers Office

  Once the user is logged on the desktop, all traffic passes between the office and customer view, and in the meantime if connection server goes down, the user can continue working without interruption? And if the Security server is installed all the flow of traffic through the Security Server? And also so that the connection to the server is out of service new users won't be able to connect to their desktop computer.

  I would also like to know the functioning of the server of replicas of my understanding, that it is an exact copy of the connection to the server? In the scenario where our main login server breaks down the replica server will take over its own or users will need to type the replica server address to connect to their desktop and how can balance us the load between the connection to the server and server replicas. Any help will be much appreciated.

  The best answer on the functioning of the connection to the server just PG 97 view installation doc http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf

  The customer connection view initial, which is used for authentication of users and the desktop view selection, is created

  over HTTPS when a user provides a domain name to View Client. If the firewall and load balancing software are

  configured properly in your network environment, this request is received by the server connection or safety view

  the server host. In this respect, users are authenticated and your desktop is selected, but users have not yet

  connected to desktop view.

  When users connect to view desktop computers, by default, View customer makes a second connection to the view

  Connection to the server or host security server. This is called the tunnel connection because it provides

  a tunnel secured for the transport of the RDP and other data via HTTPS.

  When users connect to computers view from office with the PCoIP display protocol, View Client can make another

  connection to PCoIP Secure Gateway on the host server login to view or to the Security server. The PCoIP

  Secure gateway ensures that only authenticated users can connect with desktop view with PCoIP.

  When the secure tunnel or PCoIP Secure Gateway is disabled, the desktop view sessions are established directly

  between the client system and the virtual desktop computer from view, bypassing the view connection server or

  host server security. This type of connection is called a direct connection.

  Desktop sessions that use direct connections remain connected even if view connection to the server is no longer

  running.

  How to use a server replication and a connection to the server is to place them behind a load balancer.  One of the servers stops the balancer work load is modified to send all traffic to the job server.  If you use also servers security for connections outside the DMZ, security servers have a connection for a connection to the server and the load balancer will in front of security servers.

  Hope that helps

  Chad

• Live data view

  Please excuse the noob question, as I'm pretty new to this whole mess. I use Dreamweaver 8 on Vista Ultimate with all bells and whistles installed IIS. I have all administrator privileges.
  
  I'm trying to set up a Web page that can put/get a simple MS Access 2007 database records.
  
  Say that I call my site 'Test '. I've implemented all local content in a folder
  
  C:\Users\Me\Documents\Web_Sites\Test
  
  And set up a remote folder and my test server folder in
  
  Inetpub\wwwroot\Test C:\
  
  I of course have already configured my Access database and established as a data source using the ODBC Administrator. Connection all tests check out OK.
  
  
  Now for the problem:
  I'm trying to create a Javascript .asp page (let's call it "/file.asp"), connect to the database and create a Recordset. I drag and drop recording of data, I want to display my .asp page and just to see if the thing works, I hit the live data view button to see what it gives me. I get the following error:
  
  "An error occurred in asking for the document from the test server:
  
  "An error has occurred on the server when processing the URL. Please contact the system administrator.
  
  If I try to open the page in Internet Explorer by going to
  
  http://localhost/test/file.asp
  
  I get a HTTP 500 error, which I understand he says essentially nothing.
  
  Anyone have any ideas what I should do to get this simple scenario to work?

  OK, problem solved! The second problem was just residual code from a previous version of the file that has not been deleted for some reason any. Create a new file and POW! She works!

  Ha ha ha ha ha! Eat, Dreamweaver!

• Failure of HTTP post when connecting via SIP

  Hi all

  I'm doing HTTP post, but I get corrupted in the response data.

  This problem only occurs on the device (4.5) and only if you use the SIP configuration

  (the problem does not when you use a device via Wifi 4.6)

  Here is my code:

  HttpConnection connection = (HttpConnection)Connector.open(url + ";deviceside=false");connection.setRequestProperty("x-rim-transcode-content", "*/*");connection.setRequestMethod(HttpConnection.POST);connection.setRequestProperty("Content-Type","multipart/form-data; boundary=@---------------------------123");connection.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_LENGTH, String.valueOf(data.length));      OutputStream os = connection.openOutputStream();os.write(data);
  
  if (connection.getResponseCode()==HttpConnection.HTTP_OK){   StringBuffer result = new StringBuffer();   byte[] buffer = new byte[2000];   int i = 0;         DataInputStream in = connection.openDataInputStream();
  
     while ((i = in.read(buffer)) != -1){      result.append(new String(buffer, 0, i,"ISO-8859-1"));   }}
  

  Does someone know what I'm doing wrong here?

  (BTW, the system cut the suffix HTTP "ConnectionType =" which should be equal to "mds" + "»' + 'public')

  I guess that your assumption that the "transcode-including" in the request header method caused the problem was correct.

  I changed the method request header, it shows the HttpConnection API:

  ...
  
  // Set the request method and headers
  c.setRequestMethod(HttpConnection.POST);
  c.setRequestProperty("If-Modified-Since","29 Oct 1999 19:43:31 GMT");
  c.setRequestProperty("User-Agent","Profile/MIDP-2.0 Configuration/CLDC-1.0");
  c.setRequestProperty("Content-Language", "en-US");
  
  ...
  

  and the problem has been corrected

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• Download link on the standard view connection server landing page no longer works (see 5.1)

  Hello

  We noticed a problem in the last week or so when clients attempt to download the client to view the launch of our view connection server page.

  The link is https://www.vmware.com/info?id=1109#win

  Who then is forwarded when it lands on the vmware site at

  https://my.VMware.com/Web/VMware/info/slug/desktop_end_user_computing/vmware_horizon_view_clients/1_0#win

  Unfortunately it is no longer available then you get pushed back to the root of the VMware download page.

  After doing a little digging, I discovered that the link to the download of the client page is now

  https://my.VMware.com/Web/VMware/info/slug/desktop_end_user_computing/vmware_horizon_clients/1_0#win

  So, it seems that VMware withdrew the designation of the download page view.

  No doubt other people have this problem too?

  Now, I know that I can change the link on the launch of the connect to Server page, but I'd rather have this fixed on the side of VMware so that I don't have to worry about updating the link when VMware change their website.

  Sincere greetings

  Matt Thurston

  To solve this, had to follow the part of this guide

  http://ituda.com/how-to-customize-the-view-portal-for-client-download-with-VMware-view-5-1/

  Only the part that details how to change the link on the download page.

• View connection Server Log Questions

  Hello

  I noticed a few things in my view connection server opens a session in one of my environments, and I was hoping someone might be able to specify what I see for me. I tried both of them without a bit of luck so far. So far, there don't seem to be problems caused by one of them that I know, and I see them in my two security servers and connection servers. All guests of my cluster run ESXI 5.0.0 build-474610 and all brokers are View 5.0.0 build-481677.

  This first stroke refers to three distinct data warehouses with the same caveat, and they are all three data warehouses that have been deleted or renamed due to restructuring. They are most referenced by the machines of the view or swimming pools, and all virtual machines have been migrated or removed and pools redirected before the time of the abduction. This warning occurs on every 6 minutes and reads as follows:

  WARN < VirtualCenterDriver-"GUID" > [VirtualCenterDriver] Datastore 'Data store name' not found in ComputeResource / "Name of data center" "/ host /" name of the Cluster

  Forgive me if I should do another discussion for this next (if necessary I will change this and create a new one instead), but the other thing I noticed is that the log shows several times the following entries as well about 25 minutes apart. And although they are INFO the part that worries me, it's that "deleted 24 references entry deleted." it has been the same number of months whenever it came (maybe it's a current account? That would explain it). No details as to what they call actually to would be great (obviously it seems to do with LDAP entries but it's that I get). I'd like to really just to understand what it is exactly, because I don't think that there is a real problem on this one. The entries include the following:

  INFO references < 3188 > input [ws_ldap] 0 collision resolved.
  References to INFORMATION < 3188 input > 24 deleted [ws_ldap] removed.
  INFO [ws_ldap] 0 < 3188 > collision the deleted entries.

  I would like to know if you need more information, or if I should divide these two in separate discussions. Thank you!

  On the first entry on the data may store the adam database still referred to this data store.    If this is the case, I'm sure it can be cleaned in a certain way, but you want to save the adam database before intervening.

• OBI and OPE Exception data source connection permissions

  Hello
  
  When I use my Admin OBI and run the report sound all fine.
  The role of consumer BI has the read permission, so have my roles / custom.
  But when I open the report using a non-administrator user I get the error:
  
  oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xdo.XDOException: could not get data source connection for: myconnection123
  
  I gave access to the model data as well. but without success.

  through that you will get good understanding on these authentication approaches http://docs.oracle.com/cd/E15586_01/fusionapps.1111/e20837/T539768T526688.htm

  http://docs.Oracle.com/CD/E17904_01/bi.1111/e13880/T526682T526687.htm

• Essbase studio data source connection

  Hello
  
  We are on essbase 11.1.1.3. I have question on essbase studio Connection Wizard, my database is sql server, and it seems that I can not connect to the database using windows user name and passowrd, simply logon sql user.
  
  Can is it true, I connect to sql server using my username acitive directory?
  
  Thank you

  As far as I know, it's only authentication SQL server native.

  It was a problem experienced in 11.1.2 all releases so will be the same for 11.1.1.3
  Bug 8908738 - Microsoft Windows authentication is not supported for data source connections to Microsoft SQL Server. (Number of defects in double: 7127257) »

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Samsung NC-240 - Windows 7 with VMware View connection problem

  Hi all

  My Samsung NC-240 is set to connect to my server VMware View Connection Manager. I can connect to one of my Windows XP via PCoIP or RDP virtual desktop very well, but I can't connect to my virtual Windows 7 desktop. Whenever I try to connect, it will be wrong and tell them "Session Lost!"

  Research in the NC-240 event log, I see the following:

  11 d, 00:01:09.260 > ready to connect to the host

  11 d, 00:01:21.990 > connection to the host (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.020 > using resolution 1920 x 1080 at 60 Hz on DVI port 0

  11 d, 00:01:22.150 > CONNECTED (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.160 > receiving power state updated: S0

  11 d, 00:01:22.960 > CURRENT SESSION

  11 d, 00:01:23.600 > (MGMT_RDP): invalid capability length (20)

  11 d, 00:01:23.600 > connection down (RDP protocol error detected)

  11 d, 00:01:23.680 > lost Session!

  11 d, 00:01:23.680 > (MGMT_RDP): INIT: received unknown event 0 x 20!

  Here is the information of the current version of my NC-240:

  Part number of the firmware: FW010034

  Hardware version:

  Firmware Version: 3.0

  Firmware Build ID: v250

  Firmware version Date: December 7, 2009 15:55:15

  PCoIP processor revision: 1.0

  Bootloader Version: 2.1

  Bootloader version identifier: v163

  Bootloader Build Date: August 28, 2008 16:56:13

  Here is the information of the current version of my Agent and VMware View VCM:

  VMware View 4.0.0 - 210939

  I appreciate any input.

  Thank you

  Sang A

  I think it's the same than P20 then try wyse page

• Number of rows in a data view

  Hello

  I have a data view that is bound to a table in a MS Access database.

  How can I determine the number of rows that are in the data view?

  Thank you

  Chris

  OK, I see the question... to version 8 of Acrobat sourceset Dom was locked so that if you try and change you will get security errors.

  There is a good explantion in blog of Stefan Cameron located here:

  http://Forms.stefcameron.com/2006/12/07/better-form-design-with-XFA-25/

  Down is a solution for sunbathing with current versions.

  The other option is to target your form for an earlier version, when this restriction did not exist. In the properties of the form vhoose a target version of the 7.0.5 and your code will work fine (no error).

  Paul

• Live View Live Data View CS3 vs. CS4

  In DW CS3, I was able to edit php on Design with Live Data View mode pages. Without it the page not showed correctly. This makes life easy adding content to the clients web pages (the main pillar for the maintenance of web sites).
  
  With DW CS4 this feature seems to have been deleted, or maybe I can just work on how to get it.
  
  Add a lot of content in code view is a pain - can someone tell me so and why this changed and DW became a fancy coding tool but that the workhorse that it used to be?

  Join agn zfnst wrote:
  > In DW CS3, I was able to edit php pages in Design with Live Data View mode
  > turned on. Without it the page not showed correctly. This has made life easy
  > Adding content to the clients web pages (the main pillar for the maintenance of web sites).
  >
  > With DW CS4 this feature seems to have been deleted, or maybe I just
  > can not work on how to get it.

  To access the Live view data in CS4, select view > Live Data or use the
  shortcut keyboard, Ctrl + Shift + R / Shift + Cmd + R.

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• Cannot scale manual setting of the time in the data view - returns to autoscale on track

  There was a similar post someone SignalExpress assessment but they have not answered follow-up questions.

  I can't set the time scale (x-axis) in the data view.  When I deactivate autoscale and manually enter a value, it seems to change, that it appears correctly in both the preview and the data display pane, until I hit, then it returns to the autoscale.

  It's maddening.

  The attached JPG illustrates this behavior.

  Hello

  To resolve this problem, you must right-click on the graph in the data view.  Select scale X"uncheck Autoscale.  Then, double-click most value and change the value for the value of low/high range for the desired field of view.  Change the scale of this way back not to Autoscale during execution.

• Internet does not work, make HTTP: error 12007 connection

  * original title - error 12007 I need help! *

  I have a Windows XP with Service Pack 3 internet does not work. I got tired, he works with this http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4aaf-843c-1c781dc8053f post, but when I tried it on my netbook my windows update comes out of @%SystemRoot%\system32\shell32.dll,-22580

  I have an idea I have a missing or corrupted WinSock, but I'm not sure.

  Diagnosis of last run time: 23/01/12-18:52:53

  WinSock diagnostic WinSock status attmpting error information to validate the WinSock providers database: 2 error not all entries could be found in the basic services provider winsock catalog. A reboot is required. user redirection of information in support of the appeal. user redirection of information in support of the appeal. Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Wireless 3 network, device = Broadcom 802. 1 1 b/g WLAN, LAN = Media Type, type SubMedia = wireless Info Network connection: name = connection to the network of Local 2, device = Atheros AR8132 PCI - E Fast Ethernet Controller, Media Type = LAN, type SubMedia LAN = Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Hello

  You can refer to the suggestion provided by Divya the similar thread with a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4AAF-843c-1c781dc8053f