Http to https - secure connection (SSL) filter

Similar Questions

• No secure connection https

  Hello
  
  Since this morning, when clicking on a link of wire, I get a message from the browser (IE 8) on a non secure connection https (which can compromise the security of the page...). I am asked if I want to go or not. Rather boring.
  However, change anything on my side. Any thoughts?
  
  Nicolas.

  You must import the certificate on IE. Our SSL is hosted on akamai and signed by a third party. FF/chrome/safari understands this, but is too stubborn IE. Once you import the cert, that error should not come again

  IE 8/9

  (1) when you get the error, click on continue, next to the address bar, it will show "certificate error".
  2) click on the error, click View certificates and click Install certificate.

  For IE 7

  (1) click on no when you are prompted to view the non-secure content
  2) click on the lock icon in the bar of addresses, and click View Certificate
  (3) install the certificate

  You may also need to change your security settings to allow mixed content.

  The Guide of EI

  In order to allow mixed content

  In Internet Explorer, click Tools and then click Internet Options.
  Click the Security tab and then click on the custom level button.
  In the security settings dialog box, highlight the display mixed content in the section setting various, and then click Activate.
  Click OK in the security settings dialog box, and then click OK to exit Internet Options.
  Note

  After allowing mixed content, you will see webpages with both HTTPS content and not HTTPS, but Internet Explorer will not display the lock icon

• I have a problem of "Secure connection failed", access to an HTTPS site.

  I have a problem of "Secure connection failed", access to an HTTPS site. It is of this type:

  Your certificate contains the same serial number for another certificate issued by the certification authority. Please get a new certificate containing a unique serial number.
  

  (Error code: sec_error_reused_issuer_and_serial)

  OK, I have not read the support article carefully enough - it even says that this dialogue cannot be exceeded by adding an exception.
  you are most likely right that this problem arises because the same cert is used for different sites. this support article describes a work around, but it is probable, not applicable to your situation, since you would also have to remove the certification authority and which would create all sorts of problems as your production site will tend to choose an a valid CA certificate.

  Please contact your IT department or the problem of certificate on two different servers or to allow you to run a version of portable firefox where you can mess with the certificate store and the authorities of trust in order to access the test server.

• Secure connection failed on all https sites?

  On all HTTPS sites, I get this message...

  The secure connection failed

  An error occurred during a connection to www.adobe.com. (or whatever site... lynda.com, bill pay sites, banks, etc...)
  

  The OCSP server has encountered an internal error.

  (Error code: sec_error_ocsp_server_error)

   The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
   Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
  

  This happens since I updated from FF6 on all sites that use the protocol https for logging under... I contacted most of the sites and they say that's not them... they are all sites that I have seen in the past and regularly use... now since I updated to FF, they no longer work and I had to use another browser to access these sites... it's a royal pain!

  Thank you very much! Who has resolved, but is it safe to leave it off?

  Thanks again!

  Happy Thanksgiving!

• Cannot access https secure sites after installation of Netnanny

  Use Firefox for years. Then recently installed "net nanny" software and it has changed the security settings on Firefox.

  I can't access all the secure https sites regardless of whether net nanny software is even uninstalled.

  The following alert occurs on Firefox running...
  "Could not initialize component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features. »

  Then when you try to access an https site, I get an error as follows:
  "Secure connection failed".

  An error occurred during a connection to support.mozilla.com.

  Cannot connect securely because the SSL protocol has been disabled.

  (Error code: ssl_error_ssl_disabled) »

  Use SSL 3.0 and use TLS 1.0 are both selected in the "Advanced settings"

  I also left a post on the forum of Net nanny however clearly don't have an adequate response when they talk about a setting in their software ("allow secure content") which is already activated anyway with the uninstalled software, however it still does not solve the problem. In fact, I had to use IE to post on this forum.

  It clearly provided a message when configuring the net nanny that he changed the security settings when Firefox has been executed for the first time for each user.

  I wish I had a solution so I can go back to using Firefox as my default browser and do believe a software application and a well known who, should take a non-functional browser but not another.

  Start with this support article:
  
  https://support.Mozilla.com/en-us/KB/could%20not%20initialize%20The%20browser%20security%20component

• Why ssl (secure connection) be error in virtualbox?

  I installed VirtualBox on windows 7. When running windows xp and other OS using virtualbox, I can not navigate on facebook because it has a secure connection, please see this screenshot:http://i.stack.imgur.com/E0FSM.jpg

  This windows xp has a NAT connection.
  Any idea, so I can browse ssl connections in virtualbox os? I asked this on the Forum VB but they keep saying this isn't a VB issue!

  any ideas would be great :) in the other hand, I use Eset antivirus software in my windows 7 :)

  Thank you

  Hi Harold,.

  I appreciate the efforts that you put to publish the query on this forum.

  As you use NAT connection on a virtual machine, I suggest you to publish the application on Microsoft's TechNet forum to get help. Check out the link to do so:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please let us know if you have more queries on Windows.

• necessary to enhance Network.http.Max - connections-per-server to javascript

  I have an AJAX web application which is very sensitive the number of connections allowed by the browser. Bad things happen when the limit is set at the bottom: frozen screens, the uncommitted transactions, deadlocks, etc..

  To avoid this, I need to check the current value of the configuration parameter "Network.http.Max - connections-per-server" program (i.e. javascript code) and to reject a request if the limit is too low with the instructions appropriate for the user.

  I guess that's possible because "subject: config" restores all values of settings and even allows for user to change. However, the code-behind for the page is very complicated, so I can not understand how to accomplish my task. All I need is a function or a method returns the current value of a given configuration parameter.

  Any help will be greatly appreciated.

  Anatoly

  You do not have access to the pref the subject: config page via a Web site.
  
  In theory it is possible, but the user get a pop-up and must confirm each time.

  See also http://www.mozilla.org/projects/security/components/signed-scripts.html

• Network.http.Max - connections by-server not found in 27 FF

  Tried searching Network.http.Max - connections-per-server in the subject: config. This has been deleted?

  See:

  • http://Hg.Mozilla.org/Mozilla-Central/Rev/d3ba16c3c8a0 (Bug 770331)

• IP http secure-ciphersuite... more course?

  IP http secure-ciphersuite [3des-ede-cbc-sha] [rc4-128-sha] [rc4-128-md5] [des-cbc-sha]

  SSL_RSA_WITH_DES_CBC_SHA

  SSL_RSA_WITH_RC4_128_MD5

  SSL_RSA_WITH_RC4_128_SHA

  SSL_RSA_WITH_3DES_EDE_CBC_SHA

  ... which is the safest?

  The order reference mentions proc loads for each of them, but nothing about who is the most secure.

  SSL_RSA_WITH_3DES_EDE_CBC_SHA

• Https security how are not on facebook

  This Https security is on my emails how to not on facebook

  Hello

  Security is defined by Facebook.

  Check with Facebook help and Support and their Forums.

  Facebook - help and Support
  http://www.Facebook.com/help.php

  Facebook - Facebook Contact and support of Facebook
  http://www.Facebook.com/help/?page=835

  Facebook - Forums
  http://getsatisfaction.com/Facebook

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Open C ZTE Email SSL/STARTTLS [bad-security] - unable to establish a secure connection

  I just got the open C of ZTE in mail Friday. I run through the configuration of my phone.

  I can't get my email because of the [bad security] error SSL/STARTTLS. I guess that it is my ISP because of a self-signed certificate. A solution to this been created yet? Will be he never fixed. If this isn't the case, I can send my phone to them right away and get my money back.

  DreamHost has valid certificates. However, the certificates that they are for *. mail.DreamHost.com and will not cover your area of vanity. The correct server to use for dreamhost will be one of:

  • SUB3.mail.DreamHost.com
  • SUB4.mail.DreamHost.com
  • SUB5.mail.DreamHost.com
  • homie.mail.Dreamhost.com

  For my "asutherland.org" vanity domain which is hosted at dreamhost, I use the command "digging" to avoid having to go to their panel interface.

  I type: dig mail.asutherland.org
  This translates into:

  SECTION OF THE ANSWER:

  mail.asutherland.org. 14400 IN a 69.163.253.135

  Then I type: dig - x 69.163.253.135
  which translates into:

  SECTION OF THE ANSWER:

  135.253.163.69.in - addr.arpa. 14400 IN PTR sub4.mail.dreamhost.com.

  Which is how I know to use sub4.mail.dreamhost.com.

  We do not want to improve the Setup autoconfig for dreamhost. Unfortunately, it will take a new development from us unless dreamhost implements proxying IMAP so that only one IMAP server can be used.

• Secure connection failed for Nginx + Comodo PossitiveSSL while SSLlabs Score is A +.

  I own the Web site https://vzinity.com that runs on Nginx and uses a Comodo PossitiveSSL cert.

  I tested the installation of SSL to https://www.ssllabs.com/ssltest/analyze.html?d=vzinity.com and it gets a grade of A +.

  I tried opening the site with many browsers, but I don't see this problem in Firefox. When I visit the website using Firefox 39 (Windows 7, Windows 8.1, 10 Windows and Linux Mint) I get the following error:

  The secure connection failed

  The connection to vzinity.com while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Any help will be appreciated.

  Thank you.

  That looks like a problem with bad sniffing user agent.

  It works for me if I change date 20100101 in Gecko/20100101 in on user agent (same Gecko/20100102 works, only Gecko/20100101 does not work).

  • Mozilla/5.0 (X 11; Linux i686; RV:39.0) Gecko/Firefox/39.0 39.0

  The server could be hacked to target only a Firefox user agent.
  You can contact the Web site and ask them to look into this.

• Unable to connect to google after installing windows 10 "secure connection failed".

  I installed windows 10 today.

  now, every time that I can't get to google/youtube to firefox, internet explorer and opera.

  I get this error:

  "Secure connection failed".

  The connection on www.google.com while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem."
  

  I would appreciate help, google and youtube are rather important

  Sorry for the delay, long day away.

  With this many cross-browser issues, can you confirm that your system clock date, time, and time zone are all correct? SSL validity checks are time sensitive.

  If you see a globe, I think that you are unable to use an HTTPS address. Usually Firefox displays a padlock or a "!" icon in the shape of triangle on a HTTPS address depending on whether the certificate withdraws or has a problem.

  Is there a code in parentheses, separated by underscores in the error page? If so, could you copy and paste this code.

• What is the difference between "Normal password" vs "Encrypted password" in connection SSL/TSL?

  I thought that SSL/TSL implies a secure connection.
  What it means to use "Normal password" vs "Encrypted password" in "Authentication method" when you use "connection security: SSL/TSL. One of the servers I use only accepts "Normal password", however, Thunderbird does not have the warning "server does not use encryption.

  Use of SSL or TLS means that your login and password, at least, are encrypted. There is no need to manually select the encryption.

  As said, some service providers Internet supported the option of password encrypted in itself; When they care to do it correctly, they offer TLS/SSL. Passwords encrypted, when used, are usually offered instead of SSL or TLS. I think a weakness is that only the password is encrypted, so only with SSL/TLS, your username, your password and potentially all of your message is encrypted.

  https://en.Wikipedia.org/wiki/Transport_Layer_Security

  The key is that you can use to offer the provider ISP or mail. If they offer encryption, use it; If they do not, seek a better supplier. The server configuration governs what settings and options are in use. You cannot choose to use a feature that has not been enabled on the server of its operators.

• Secure connection has no error - for almost all sites!

  Mozilla Firefox began vomiting following for almost all Internet sites error message I usually access!

  The error:

  The secure connection failed

  The connection to the server was reset while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the web site owners to inform them of this problem.
  

  I use a laptop computer Lenovo z580 with Windows 7 Home Premium with Firefox installed 41.0.2.
  I checked the proxy settings, and they are the same in Firefox, like in other browsers (IE and Chrome).
  I checked the settings of the system time, and there is no problem there.

  I'm unable to download images for a reason, so I downloaded the images (of the error messages for different Web sites to http://s912.photobucket.com/user/sushd/library/Firefox

  Any help is appreciated.

  TIA

  Make a check of malware with several malware scanning of programs on the Windows computer.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked