HTTPS problem after upgrade to Win10

Similar Questions

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• Microsoft Windows Nokia Lumia640 LTE Denim loses FlashPlayer & IE11 after upgrade to Win10 Mobile overview

  To the right; After upgrading my Microsoft Windows Nokia Lumia 640LTE Denim phone Win10 mobile preview, I have function no. FlashPlayer available onboard, that shows any ad or the option to turn on or off in the settings of parameters / advanced as it should. It also, since the upgrade, omitted the option to block pop ups as well. The Explorer11 of the Internet also failed to appear after upgrading to Win10 Mobile preview, which, like Flash Player, is supposed to be incorporated. I did a hard reset without success, as again after the first upgrade to Win10 Mobile Preview, the second re-installation gave the same results.  Help, please! Thank you!

  Hello

  I have answered your original question: Flash Player only is not supported on mobile devices, including Win10 Mobile, only devices dekstop.  See Adobe Flash Player | Technical for the supported platforms.

  I don't know how and why it may have worked before the upgrade to Win10 Mobile Preview, but Flash Player has never been supported on Windows Phone.  Maybe it was something that Microsoft does. I recommend you contact Microsoft support for assistance.

  --

  Maria

• Bootcamp after upgrade went Win10

  Running Win 7 on El Capitan on my MBP 2011 end 17 "for months, then awoke to find that Windows has automatically upgraded to Win10. Everything was very good, but had lost the Bluetooth device. I rebooted to Mac to try sorting this side here and then BCA did not show any current partition of BC.

  Following are the results of TestDisk and gpt

  **************

  Last login: Friday, June 24 at 15:29:19 on ttys000

  John-MacBook-Pro: ~ list of john$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 750,2 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 374.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 374,8 GB disk0s4

  / dev/disk1 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme MB + 48.2 disk1

  1: Apple_HFS Adobe Flash Player I... Disk1s1 of 48.2 MB

  John-MacBook-Pro: ~ list of cs john$ diskutil

  No logical volume group CoreStorage found

  John-MacBook-Pro: ~ Jean$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 750156374016; SectorSize = 512; blocks = 1465149168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk0 ': Undefined error: 0

  John-MacBook-Pro: ~ Jean$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 91201/255/63 [1465149168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-731414704] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [731824344-1269544]

  * 04:07 1023 254 63-1023 254 63 [733093888-731131904] HPFS/QNX / TO THE

  John-MacBook-Pro: ~ Jean$

  *******************

  Any help would be greatly appreciated.

  JohnS

  You have a GPT corrupted that the release of the command of TPG watch. Please download Fdisk TPG - https://sourceforge.net/projects/gptfdisk/ - and after the release of

  sudo-l/dev/disk0 Gdisk

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• WiFi problem after upgrade to Windows 10

  Greetings!

  I read a few posts on WiFi problems after the (improper) upgrade of Windows 10. I have a ThnkPad T530 which I've upgraded to Windows 10 Windows 7 in September (too late to roll back). Here's my question:

  I have three computers on my desk. This standard T530 running Windows 10, a ThnkPad E555 running Windows 7 and a Dell running Windows 8. I used all three last Friday. I installed Norton on all three Friday and everything went without a hitch. When I first started their return to the top of this morning, the two others came online as usual. The ThinkPad T530 connected by a router in the company, but has no access to the internet. I can connect to the hotspot on my phone and it connects fine. I tried to turn the WiFi connection and then turn it on again, restart, by killing and restarting the business connection, etc. Nothing changes.

  Help, please

  Ben

  Try the following:

  Open administrator command prompt:
  http://winaero.com/blog/how-to-open-elevated-command-prompt-in-Windows-10/

  Then, run this command:
  netsh int ip reset c:\resetlog.txt

• Dell XPS Ultrabook 12 has network using WIFI connection problem after upgrade to Windows 10

  I have a Dell laptop XPS Ultrabook 12 that worked fine on Windows 8.1. When Microsoft prompted me to sign up for upgrade to Windows 10, I hesitated, but finally, I signed up for it. In recent months, I have been asked several times upgraded to Windows 10 but I just ignored and delay the update as much as possible, because I need to work with the laptop and I can't afford to have problems after the upgrade.  To my horror, Microsoft forced an install of Windows 10 this morning without allowing me to delay and just after the upgrade, I can't connect to my existing network. I have therefore no access to the internet and I am currently typing this complaint using another PC. I noticed that the laptop can connect to the network automatically when I walk my router but the connection will last only a few minutes, and then he'd cut off. I tried to connect and the message I get is "unable to connect to this network. I checked with "ipconfig/all", wifi said media disconnected. I checked with the Dell support website and downloaded and installed a newer driver, but the problem persisted. Apparently the surf on the internet, this problem is faced with a number and any suggestions to fix do not work (after that I tried).

  Help, please.

  You should be able to go back to 8.1 for Windows by following the instructions here:

  https://www.YouTube.com/watch?v=2Y3uc2FWlK0&index=3&list=PL1RkaknDn7v-w5LEVIDvTCvmKZ_1_NcZz

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• iPhone 6s + had some problems after upgrade to iOS 9.3.2

  1st issue is the battery. Already before the upgrade to iOS 9.3.2 since iOS 9.3.1 my battery iphone 6 s + last latency time approximately 40 hours. Now after the upgrade to iOS 9.3.2,and it last only 15 hours. I noticed that the battery went from 100% to 60% in 8 hours without using it. I change all the settings after upgrade.

  2nd question is Siri Spotlight search Suggestion. I see more suggestion of Siri (recent call log and recent applications) in the Spotlight search. I also noticed that, to start the Spotlight search, I need to get to the bottom of the home screen. Previously on iOS 9.3.1 when I push upwards, search Spotlight is cancelled and return to the home screen. Now in iOS 9.3.2,and it no longer works.

  I also-hard reset by pressing Start button / stop and the "home" button together until I see the apple logo. Who will not help too.

  Have you checked the battery in use/settings/battery? All apps using the battery more than usual?

  If the power to restart the phone did not help, the next step after that which could be set back to factory settings and restore form the last backup, especially if you updated using the option 'Over the Air '.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  For some users, removal and establishment of post counts once again solved the problem for others, connecting to iCloud and connect again after you stop the farm by a restart of drain.

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• HP 13-2106tu spectrum XT: Webcame problem after upgrade to 8.1

  After upgrade to win victory 8A 8.1 lost my webcame video/image. When I tried to open the cam aps or video Skype webcame light on but the cam does not work.

  No webcame driver found on http://support.hp.com/us-en/product/HP-Spectre-XT-Ultrabook-13-2100/5296014/model/5312995/drivers

  Its really disgusting...

  If possible, please give me solution.

  You can download and install the driver down the link and check if your webcam now works fine.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123546-1 & CC = US & DLC = in & LC = on & os = 4158 & productOid = 5312995 & sw_lang = & Product = 5312797

• Internet problem after upgrade to 10.11.3

  someone at face safari connection problem after the upgrade

  I'm having exactly the same problem.

  Is it possible to uninstall the 10.11.3 update and revert to the previous version?

• K3 Note Wifi problem after upgrade to the marshmallow

  Guys, after upgradation of Marshmallow in k3 note, there arise a problem of wifi, it just dropeout every minute like connect for 1-2 seconds and disconnect then automatic...
  If someone knows how to fix this please tell me... I have hard reset my phone but the problem is not solved... so please tell me the solution

  Note from the admin; phone added to the subject type

  
  

• Latitude E5500 Intel GMA pixels problem after upgrade of RAM &gt; 4 GB

  Hello, I use latitude e5500 with the following specifications:

  • Processor: intel core 2 duo
  • graphic: Intel GMA 4500 MHD
  • OS: Windows 7 SP1 64-bit
  • RAM: 6 GB (2 + 4) 800 MHz

  Recently I have upgraded RAM of 4 GB (2 + 2) 6 GB (2 + 4). They are of the same manufacturer, the two 800 MHz I checked the new memory with the Dell diagnostics - it's ok. After upgrade, I have a serious graphics - parts of my get pixelated screen problems. It is irregularly, with different applications ran - see the screenshot.

  I tried to uninstall the graphics driver - it's ok, but I'm not ;) mode 640 x 480 I have tried different drivers - no improvement. Also, I removed a 2 GB - it works very well with my new 4GBs

  

  Hello

  Yes, I solved the problem. I had to buy an another 4 GB from the same manufacturer with the same properties. With 4 GB + 4 GB, it works perfectly.

  Concerning

  Aleksander