Hydrogensensor with 6009 usp (German)

Similar Questions

• Using the output with 6009 or 6216 possible buffer?

  Hello

  I have a USB6009 and a USB6216. I need to generate a signal by using the analog output and I would use the output buffer. My questions are:

  -The USB6009 has an output buffer? I always get an error, but I know from experience that this device is very limited, so I wonder if they have not only an output buffer... (Programs in input buffer are not a problem at all).

  -J' took the USB6216 and I tried the example WfmGenUp.c downloaded from somewhere in the area of the developer (sorry I lost the link but fix the code) but I am not all analog output signals and after you press ENTER to stop the program (depending on the show) I get this error message:

  NO MORTALS RUN - TIME ERROR: 'WfmGenUp.c', line 113, col 9, id thread 0x0000088C: DAQmxStopTask function: (is-200016 return value [0xfffcf2b0]). Measurements: On-board memory precision passing. Due to the limitations of system and/or the bandwidth of the bus, the driver could not write data to the device fast enough to track the rate of output of the device.  Reduce your sampling rate, change the method of transfer of data (from interruptions on DMA), use a product with more on-board memory or reduce the number of programs that your computer runs simultaneously. Task name: _unnamedTask<0> Code of State:-200016

  I don't know if the problem is just that the 6216 does not support the output buffering or the other...

  -So, if the output control is not supported by 6009 or 6216 what would be the best way to constantly generate signals to 100 s/s?

  Thank you very much

  Kristel

  Hi Ryan,

  the USB-6009 case has 150 s/s softwaretimed AO, so you won´t be able to use AO stamped with the module.

  The USB-6216 supported in the analog output buffer, just follow the recommendations that the driver gives you,

  for example by reducing the sampling frequency, if there is an overflow memory due to the limitations of system and/or the bandwidth of the bus.

  Experiment with the parameters and the basic to see in what range of sampling it works.

  You can find appropriate examples

  ANSI C:

  C:\Dokumente und All Anwendungsdaten Users\Dokumente\National Instruments\NI - DAQ\Beispiele\DAQmx C\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk ANSI

  LabWindows CVI:

  C:\Dokumente und Users\Dokumente\National Instruments\CVI\samples\DAQmx\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk Anwendungsdaten All

• Firefox does not work with the USPS auto boat web site. Won't print postage labels. Please correct.

  After I entered all the information, select it a service section is not working properly and I can't print a shipping label to the France.

  Select a service type. THIS IS WHERE THE WEB SITE DOES NOT WORK PROPERLY

  Choose a Type of Service
  Type of demand price delivery package
  Enter the details of the package to display the service options.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Epson print driver changes both margins to address for the envelope printing. Three other printers print the addresses of envelope with correct margins.

  I bought a new all-in-one Epson Wireless WF-3540.  So new Epson technical support people had one to test my problem.  I like it a lot because it has two trays cassette for 250 pages each, and a page break back.  For the love of the work I do in this description I use the back form feed on the Epson only.

  Suppose I have a business letter in Word 2007 using Windows XP Pro.  My default printer is a HP 932 C.  I click on Mailings, Create, envelope and print it.  The result is the number 10 envelope with the address of the left retour.3,.3 of the top and the address of destination 2 inches high and 5 inches from the left.  Exactly the way I want it.  A selection button.

  Suppose I have install the new Epson WF-3540.  I opened the business SAME letter in the same Word 2007 using Windows XP Pro.  This time around with the Epson WF-3540, I followed the same procedure for click mail merge, Create, envelope and print.  The result is an envelope of number 10 with the return address 1.5 inches from left to right top et.4.  The destination address is 3 inches from the left and the top 2.25.  The non-professional delivery address looks and interferes with the USPS standards.

  I worked on the problem for two days.  I was on the phone with Epson for a total of four hours.  Here are the various attempts to set this right using the Epson WF-3540.

  1. in the Ribbon to create open envelopes, click options, and set the margins for the return and destination addresses as I would like.  I always use the et.3 valeur.3 return address and the destination address in 5 and 2.  I put these values in the options, click OK.  Print the envelope, and it is printed as I've described above with Epson.  In looking at the options for envelopes that they were changed to Auto.

  2. I have a test with the help of the same letter of businesss, Word 2007 and Windows XP.  I set the default printer to the HP.  This time I select envelope, add to the document.  I see an image of the envelope, watching leaders aside, it looks I want.  I close Word 2007, without saving the changes.  I have change the default printer to the Epson, open Word, the same letter from the company and select the envelope in the document.  It seems to appear in the same strange settings how it prints.

  3. I tried to change the margins of the envelope in the document with Epson as default.  When I try to print it throws an error telling me that I am trying to print outside margins.

  What are the effects of the behavior of the default printer?  Why the change in the appearance of the envelope both printed and in the document when I change printers.  What does the print driver? has to do with the formatting?  The installation of the Epson gives something in the registry that control margins almost anything.

  Epson told me there is no problem, but they are ready to buy the printer back to me.  Remember that they don't even have one to test on.

  I tried adding some dummy printers, without the actual printer and using the drivers only.  For example, I added an Epson ActionLaser 1100.  When I set it by default and use the same letter sales and Word 2007, I click on the envelope and add it to the Document, the addresses on the envelopes are exactly where I wait until they are, using the ruler on the side.

  What is - this subject a new printer is to control this mess?  I'd love to keep him.  I do a lot of letters and need the rear feed and must be able to one click printing envelopes.

  I had the same problem with my Epson WF-3540. Came to this site looking for the answer after the Epson site doesn't seem to have an answer. After reading the posts, I went to the printer, and I gave it a try more. I found what seems to be a solution but not transparent, that it worked.

  I noticed that when I tried to print the envelope property printer box shows the paper letter size (8 1/2 x 11) and not an envelope (#10). I changed the setting as the skin #10 and checked manually minimize margins. I then used the button Add presets save this as # 10 envelope as a new preset. This allows to print the envelope in the current printing of the page with the ability to use almost the entire surface of the envelope. You then switch to printing standard predefined when you are finished.

• Excess of text with multiple layers

  I'm creating a bilingual brochure in InDesign with three layers; German, English and a layer of the image. German and English layers consist only of text boxes. When you view the document in InDesign with each of the three visible layers, some text boxes are the two texts are each on the others and others that one of the text boxes, then the other zone of the other layer text either invisible or packed off the page. This means that when I export it as a PDF file, certain parts of one of the layers of language do not exist. InDesign was told in these places, I have overset text I need to fix. I need the text to inflict on one another, however, so that the two versions are the same.

  Is could someone please tell me what I could do here? I would be very grateful for any help.

  Thank you

  I guess, there is dressing applied on some of the blocks of text.
  Turn off wrapping of text for all text frames and that there should be no problem to export in PDF format with all the layers and objects remain in place.

  Kind regards
  Uwe

• Performance problem of creating index with LOB/CLOB content

  Hello
  
  I have a problem with indexing performance with a table containing columns of text
  also a clob and a lob column.
  
  Indexing with 20,000 lines takes about 1 hour on 11.2.0.4 with the last batch of patches 12 on
  win x 64.
  
  on a 11.2.0.1, the process is done in a few minutes.
  
  So what can I do to find out where is the problem?
  
  I use filter auto and basic lexer.
  Operating system is W 2008 R2 SP and latest patches. OS lang is English.
  DB is installed with AL32UTF8 and German and English language packs.
  
  also watched and ctx_user_index_errors and pending and there is no error or waiting in lines.
  After the index is created, everything works fine. during the creation of index no other user is connected to the database.
  
  so why 11.2.0.1 is so much faster than 11.2.0.4?
  some advice for me?
  
  Thank you!

  Hello

  so I solved all my problems.

  So I made two changes:

  1. I declared the variable theNotiz2 for recording the output for the raw text of the column NOTIZ (is a clob), add the output to the Out-Clob parameter

  2. I used the same variable for the--> this blob field caused an error with line with lob is not locked... so I said a second variable for this and that solved the problem.

  normally, I think it should work with 1 variable... but is an acceptable workaround.

  Performance now is OK because the procedure, I can set on which the documents I want to do a search or not.

  Second thing, but has nothing to do with Oracle: my frontend application makes a ZIP for each insert in a column lob and if the ctxhx does not index the content, the MDC, and before calling the conversion of plain text, so I have to make a decompression of the blob...

  so for now, all problems solved. Thank you for your support.

• InDesign CS4 - change engl. The language of the INTERFACE in German

  Hello

  I use the ID CS4 and to change the menuelanguage (ui - UserInterface) of engl. in German,.

  How can I do?

  I use it on WIN 7 with systemLanguage is German.

  The CS4 Mastersuite is complete installed.

  Photoshop and Dreamweaver run in German.

  a big thank you

  T.Rosenthal

  Same I have answered in the InDesign forum: not possible with Creative Suite products. Easy if you get a creative cloud subscription.

• Web page does not; probably due to some button / combination mouse click

  If we had a coffee spill on our laptop, which now causes some keys to support every now and then by themselves (quite often in fact), most often it is the Enter key that gets stuck. I believe that this 'feature' combined adequately with the mouse left/right clicks caused some glitch a Web page where the appropriate combination happened, empty load now.

  Today, it happened to my gmail account: through the mails, I noticed something happening on the screen (has been too quick to see what it was, but of course, at least the entry key was stuck) but after that, I can only load gmail with basic HTML, not in the standard display. The other affected page is www.w126-forum.de, empty plain charges. With explore, the German page loads very well.

  No other pages are affected (yet)...

  Hello

  If you have not clicked accidentally specific site dialog box settings - for example. Gmail has an option to switch to the HTML version, simplified - you could try the feature reset Firefox via help (Alt + H) > troubleshooting information.

  (To return to the previous mode, you were using, close the new profile (i.e. Quit Firefox), start Firefox and choose the default user profile.) Alors_que Profile Manager is open, you can also remove the reset your profile (the one containing the random numbers) or the old profile, as appropriate). If the reset is correct, it would be a good idea to delete the old profile as otherwise it would be left intact with the previous data before deletion.

  Profile management

  Profiles Howto

• How can I save Toshiba e330 ROM (rom bios?)

  I have toshiba with windows mobile German and my friend have English version, how it can save a clean ROM of the e330, I try on my toshiba releoad?

  Hey man this is really old phone.

  Have you checked Toshiba download under http://eu.computers.toshiba-europe.com page?
  Maybe you can download the English version.
  Check the type of product for archive and family choose pocket PC.

• Satellite L675 - how to change into another language (Windows 7)?

  We recently bought a number of L675s with Windows 7 Home Premium. I installed it with the language = German, but a couple of our staff now came back and asked to have the English instead. The machines came with four languages (English, German, French, Italian), but once installed, it is not possible to change the language. Not even using the recovery disk. What should I do to achieve it - buy the Toshiba Recovery disk support?

  Hello

  As far as I know it of not possible to change the language after you have selected the language during the installation process.
  So either you will modernize the Windows 7 Enterprise or Ultimate and install a package of multiple language (it is available for the version of Win 7 Enterprise and Ultimate only), or you can buy the here Toshiba Recovery disk:
  http://backupmedia.Toshiba.EU/landing.aspx

• Problem installing Windows XP on Satellite A100

  I have a Toshiba A100 with Windows XP (German) and I would like to clean install Windows XP (English). At the start of the CD installation normally inspects the hardware configuration, but after that it crashes. I left it for 15-20 minutes but there was no response, and then I had to leave the facility.

  The installation guide for windows xp says it has something to do with the hardware compatibility. (I tried pressing F5, F6, F7 to skip this step, but did not help)
  I tried the same installation CD on the laptop from my friend (of another brand) and it worked! I wonder what is so specific as to the compatibility of equipment for Toshiba laptop with windows xp.

  However, my (German OS) recovery CD works great!

  Can someone help me on this issue?

  How about using google or search in this forum for similar topics

  If you are looking for in this forum just for example you will find this link:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

• Windows XP and Satellite M40X - programs are broken

  Hi, I recently bought the Germany satellite m40x. Windows was in German so after coming back to India, I tried to install the version of the University a license of Windows XP on it.

  I tried several versions of windows with or without service pack, but the problem that remains with many applications like Yahoo! Messenger 7 and Nero Start Smart and the age of empires and many others... the programs crash. I am not able to understand the reason behind this. With the Windows German, all the programs worked.

  After installation, the program works, but after the computer restarts, it starts in error. Some older messenger versions work, but no version of nero does not work.

  Please help me... Thank you

  [Edited by: admin August 17 05 17:43]

  Hello

  In my opinion, you can find on the internet.
  -Acrobat reader can be downloaded from the internet.
  -DLA and recording is now installed on the original image.
  Java runtime environment 2 - Dim V1.5.0 you can also find on the net and install separately

  I hope that in Device Manager all hardware components are installed correctly.
  What you mean with the same error? Can you be more clear about this?

• Re: Satellite L300: Vista crashed and no recovery disk

  Hey all,.

  My Vista broke down, and I have no CD with the copy.
  Yes, I'm looking for a link with BONE in German...
  I always had my product key.

  L300 - 13Y, model PSLB0E - 020Y01XGR
  Pleas help me.
  QWERTY_2

  Hello

  You can not download the recovery disc!
  You can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  It is not expensive, I guess that he s ~ 30 euros

• Portege M400 - need to restore CD English

  Hello

  I just got myself a nice M400 used - shame they aren't more shows like that in the new models.

  In any case, it comes with the original German recovery CD. All those who still have an English one that he would be willing to trade in Exchange for my only German or sell or lend me the CD so that I can do a basic English install? That would be fantastic!

  See you soon,.
  David.

  Hello

  Yes, correctly someone will change the recovery with your disk but let me give you a little advice:

  If you need a new recovery disk, contact your local authorized service provider. Guys can get in touch with Toshiba and order such a disc for you. Just ask guys, it s always interesting to talk with them a little bit ;)

  Alternative you can start installing XP from a normal disk of Microsoft. All the drivers and tools you will find on the page of Toshiba.

• Unable to update via the App Store system software or download

  Hello

  (I'm new to this forum and hopefully the below is enough for others to understand my problem)

  Since I have my Macbook Pro I have a huge problem for updating the software via the App store or by

  Download the files of the Apple update supports pages (for example osxupdcombo10.11.2.dmg).

  The ONLY way for me to update the software system is through resettlement (command-R during the boot process) of the

  system via the web, which i, in my case, a procedure of 5 hours each time.

  In the appstore, the need for updates is displayed, but when I click on the respective install button, the installation requirements

  are briefly "calculated" for 2-5 seconds, then the process stops without having to install anything.

  When I download the .dmg on the support page file, I can convert it to a .pkg file and start the installation. The process is running

  me through the entire list of subjects required to install (accept the terms, select the location to install etc etc) asks me to restart... but then

  nothing happens / past: the old version of the system continues to operate my MacBook. Using the procedure for re-Setup "command-R-Start-up.

  whenever I have slowly migrated to Yosemite to El Captain lion (now at 10.11.2), but it's certainly in the right way.

  I have been in contact with the local (German) Apple support hotline. They even have access to my computer to watch what I'm doing and how my problem

  If displays on the screen, however, could not help and promised to call back by the technician never happened.

  Recently, I was able to solve a problem of not being able to remove all the cards in 'Contacts' following a detailed recipe posted by Linc Davis in this forum.

  So I thought that Linc or someone else in the forum could help me with my problems of update.

  Thanks in advance

  PETERBBERLIN

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.