Problem installing Windows XP on Satellite A100

Similar Questions

• Install Windows 7 on Satellite A100-SK9

  Hello

  I have a Toshiba Satellite A100-SK9 with its original operating system (win xp), installed on it and I was thinking about upgrading my operating system to windows 7.
  I just happen to have a copy of the box (the receipt of a friend) and I was wondering if it's okay to use to do a fresh install or I have to buy a drive for upgrade of windows 7 Toshiba?

  Thank you

  Toshiba upgrade kit is not designed for these old models of laptops and Windows XP Home edition cannot be upgraded. As far as I know just more recent Vista preinstalled laptop can be improved.
  What you need is the Microsoft Win7 installation disc.
  What you can do is to make double installation of the OS.

  You can install Win7 on the second partition and test it first.
  Where you bought your laptop? What is the country of purchase?
  Satellite A100-SK9 does not for me?

• Re: Problem installing WLAN device for Satellite A100-813

  Hello

  I recently formatted my laptop and went to the toshiba driver download section.
  And downloaded and installed all the drives except my NETWORK LAN and WLAN NIC card.

  I tried to download all driver, but usually still install.
  I tried to turn on the WLAN and tried again, still no luck.

  Here is a picture of what I still need to install.
  [photo: http://img9.imageshack.us/img9/3751/80023479po1.jpg]

  Thanks in advance
  -Scott

  Hello

  Seems that you tried to install the drivers bad for bad notebook series.
  Satellite A100-813 belongs to the series of PSAA8E and the laptop was equipped with Wireless 3945ABG Intel and Intel Pro/100 LAN card network card.

  If both are of the Intel chips.
  Check the Toshiba pilot European page again and try reinstalling the drivers!

  Good bye

• Problems installing Windows 10 on Satellite C

  Hello everyone

  After a complete installation of my PC with up to days
  Windows offers to install my Windows 10
  I said yes, after this time to install the PC has restarted and white screen and flashes.
  and impossible to restore the key F8 with Grandma & restore CD
  j came down the aisle is all installation c.

  Well thank you for your help so far that I have several pc cose dl installation Windows 10

  Best regards

  Nice day

  I get my laptop to factory settings.
  C70D-B-108.

  Vincent

• WLAN incredibly slow after installing Vista on my Satellite A100

  Hi all
  I just installed Vista on my Satellite A100, with / 3Gb and Intel PRO/Wireless 3945ABG. Watch the video stored on my workstation, which worked perfectly with XP, crawls to a halt and is totally impossible. If I connect to the 'copper', it works like a charm.
  Drivers updated to the latest version.

  Anyone have any idea what I should look for?

  Concerning
  Hans

  Have you already installed Service Pack 1 for Vista? Had the problem that you, that I could not stream videos on my laptop as it froze after some time of reading.

• Install Windows 8 on Satellite P300

  As usual rushed in and installed Windows 8 on satellite P300. What error - slow, loss of functionality. How to get back to Vista was preinstalled or is there a way I can fix it to run windows 8.
  Processor Intel (r) Core (TM) 2 Duo CPU [email protected] 2.4 GHz, 4.00 (2.99 usable) GB RAM 32-bit system, x 64-based processor.

  Satellite P300 is plu laptop comes with Vista, but also supported for Win7. Unfortunately, it is not supported for Win8 so, in my opinion, there is no sense to install Win8 on it.

  Win7 works perfectly on this machine so if possible use Win7 on it. in case you want to use original Vista, you must install recovery using recovery DVD image. This way only to s to have factory settings once again.

  The question is: do you have the recovery disk?

• Need drivers for Windows 7 for Satellite A100-773

  Hello

  I need Driver Windows 7 for Satellite A100 773

  (A) display!
  (B) sound?
  (C) WiFI!

  Hello

  Win 7 is not on the market! Just a beta (RC). Therefore, you will not find that all pilots released release for Win 7
  But if you need some drivers then try the Vista drivers.
  Many users have reported that, in many cases, drivers Vista worked with Win 7 OS

  See you soon

• I need all drivers Windows XP for Satellite A100-786

  I need all drivers Windows XP for Satellite A100-786. I want to use Windows Xp on my new laptop, but I have no drivers. Please help me!

  Look at the bottom of your laptop for PSAAxxxx letters. If it's PSAANE, then the drivers are for the PSAA8xx model, as for the PSAARE model, it has PSAA9xx... Try it, it works for me. It has the same sumptuous.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• Satellite A300-1 OC - problem installing Windows XP

  Hi all!

  Faced with the need to install * Windows XP * on my * Satellite A300-1OC. *.

  Here's the problem:
  the * pilot integrated distribution OS for the SATA downloaded from the Intel site.
  When you install XP no problem, but * when you drive where to install the system all the drive letters got mixed up *.
  As it has already established a system, the * laptop starts sometimes hang on for 2-3 minutes, then again normally.* operating

  Help solve this problem and recommend the correct SATA driver for my computer.
  And I would like to hear the difference, * if I set BIOS compatibility mode or leave AHCI.*

  + Thanks in advance. +

  Hello

  Please, read here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52625&TSTART=30

  It may be useful for you. The topic starter had the same problem, it instaled windows, compatible mode, and then extract the driver of the exe files.

• Re-installed windows 98SE on satellite 230CX only one problem left

  I have just re installed windows 98SE on and old satellite 230CX and I only have one problem left. Whenever I start windows it is a plug-and-play monitor and try to find a driver for it. There is no connected another monitor and the screen works well. I know this isn't a major problem, but it's just bugging me now.

  Any help would be appreciated

  See you soon

  Rob.

  Hello

  I found the info that this camera comes with Win 95 and on the Toshiba download page under archive, you will find all the drivers you need.

  Try to install the driver display that there are listed. This is a very old unit and I can't tell you more about your problem.

• Satellite A200-1YO - problems installing Windows XP Home edition

  Hi guys,.

  First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.

  I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.

  now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.

  The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)

  advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.

  Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.

  So you need the driver for SATA ICH8M_32bit.