Hyper-v for vsphere conversion fails

Similar Questions

• Hyper-V for ESXi conversion not transfer information from IP address

  I made a successful conversion of a VM Windows 2003 Hyper-V to ESXi 4.1 using Converter 4.3. It seems that IP information are not reported on the destination vNIC VM VMWare. This is expected behavior?

  Hello.

  Yes, this is the expected behavior.  I usually run a "ipconfig/all > C:\ipinfo.txt" command before the P2V, while I have the old information ready in the new virtual machine.

  Good luck!

• Catalog items 14 (from PSE 3) conversion failed

  I was unable to properly convert my PSE3 catalog to PSE14.  I went through all the possible solutions in the knowledge base, and I still cannot get lucky.

  My PSE3 catalog resides on a windows XP computer and I try to move it on a 64-bit Windows 10 with PSE 14 computer.  With my last attempt, I followed the instructions in the article titled "convert organiser for 64-bit versions catalogs / Photoshop Elements 13 or later.

  I saved the PSE3 catalog to a hard drive.  I restored the PSE 14 catalogue.  It seems to work fine until the failure of the conversion notice.

  I used the catalog Conversion utility to convert the catalog to a catalogue of .pse13db.  He also appeared to work properly.

  During the conversion of a catalogue of PSE14, he went to 37% complete and continuous fast conversion for awhile without the % (he continued to display the names of files that have been conversion) back, and then I got the standard error message.  I checked the log by following the instructions, and that's what it contained:

  Conversion log: began the conversion of D:/media/photos to C:/ProgramData/Adobe/Elements Organizer/catalogs/photos

  copy the entire catalog directory...

  error: D:/media/photo copy failed, abandonment

  catalog copy failed

  Conversion log: Conversion failed

  It is the newspaper.  I do not know how to do this, because I think I tried everything in the KB and that I could find in the forums.

  You have followed the instructions:

  Convert catalogues organiser for 64-bit versions. Photoshop Elements 13 or later version

  Have you downloaded the PSE13 version as requires it?

  7. at the end of the conversion process, the .pse13db file and the cache of miniatures are available in the specified destination folder.

  8 launch organizing elements, choose file > manage catalogs > choose location custom, and then click file > manage catalogs > repair/Optimize.

  Note:

  If the conversion fails, open your catalog of the version of the elements organizer that it was created in, and then click file > manage catalogs > repair/Optimize.

  If you have installed the trial version 13, you can check the catalogue with the "catalog.pse13db" file is working, and you can use it to repair/Optimize before using version 14 of the convert.

• Conversion failed... Solution, anyone?

  I use Microsoft Excel A LOT. I created a logo for my company (that's all I have) and saved as PNG, as most printers require for this format. However, the printer I use asked I have save the drawing in PDF format. I needed to convert these drawings from PDF to Excel to make changes, (change the color of the logo for different labels, etc.). I was told to buy Adobe export in PDF format. Yes, I did. However when I tried to convert a pdf to excel I kept getting a "conversion failed". I started a 'chat' and told to use a different browser. Yes, I did. (I also emptied my cookies). The two did nothing, as always, I got the same msg to failure. If I bought Adobe Illustrator, would I be able to use it on my excel Drawings, I created? And I can use this on images I've saved in PDF format?

  Since you have the logo in PNG format, you can download the file in a reply message using the camera icon in the web interface of the forum?

  Do not attach a file to an e-mail if you use email to follow this thread, it won't work.

  What people are saying is that you can place the PNG file in a new Illustrator document to use as a template and RECREATE your logo using the vector tools in Illustrator.

  Then save it to the file format that retains the vectors and can be placed in Excel. (remove the PNG file in the illustrator document when you have re-created the logo, you want only the vector logo)

  You can then open your Excel file and delete the PNG and replace it with the new vector logo. You can then create a PDF file from the Excel file for the printer.

  If you need to change the logo at any time, open the vector logo in Illustrator and save it as a new version with a different name, so that it does not replace your original vector logo.

  Reopen your Excel files and replace them with the new vector logo. You don't want to try to replace the logo in PDF files, revert to the original Excel files, replace the logo and create a new PDF.

  Also, you don't want to put the Excel Illustrator PDF file because you only need the logo.

  And especially you IMPOSSIBLE to save any file in Illustrator as a Excel file!

  This is not how things work.

• The conversion failed 13-14 PES PES catalog

  I can't convert Photoshop elements Photoshop elements 14 13 catalogues.  the last entry of PSE-conversion-log is: an error occurred in the SQLite database: cannot open database file.  The conversion failed.

  I was finally able to convert my 13 catalogues PES to PES 14.  I don't know what action solved my problem but I changed a number of things.  First of all, I had installed 14 first PES at the same time as the installation of 14 pse above all catalogues have been loaded but had not opened first.  I opened the first with the catalog that I had managed to convert previously.  I left the first and rebooted my computer.  Secondly, I opened the pse 14 Organizer and deselected the option of automatic facial recognition in preferences > media analysis.  Catalogue conversion completed successfully this time.

  Thank you for your help.  I think that my problem is now solved.

• Conversion fails with the error: COULD not: - ERROR - convert: converter.fault.FileCreationFault

  Hello, I try to convert a windows 2003 server of citrix server to vmware (the last of them succesfull 20).

  The job runs up to 95% one error:

  "Create von ' \\.\vstor2-mntapi10-shared-D587D58700001000000000000B000000\$Reconfig nicht possible."

  Logfile by saying:

  2013 04-07 T 14: 14:20.752 + 02:00 [error 12632 'Default'] [task, 350] [LRO] Unexpected Exception: converter.fault.FileCreationFault
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [task, 379] [task-72] - ERROR - convert: converter.fault.FileCreationFault
  -> (converter.fault.FileCreationFault) {}
  -> dynamicType = < unset >
  -> faultCause = (vmodl. NULL in MethodFault),
  -> file = "\\.\vstor2-mntapi10-shared-D587D587000010000000000005000000\$Reconfig$"
  -> msg = ""
  ->}
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 267] retrieved taskInfo to "converter.task.Task:task - 72" mapping to "converter.task.Task:task - 72".»
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 307] the task with id = "task-72" proved to be a task 'recent '.
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-72. The task is still 'young' so a bundle of newspapers going now is assigned.
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-72.
  2013 04-07 T 14: 14:20.925 + 02:00 [10056 "Default" info] passage work 0 "job-72" completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
  2013 04-07 T 14: 14:21.125 + 02:00 [10056 "Default" info] suspended 1 elements of Planner for employment (job-72) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
  I run vCenter Converter Standalone 5.01 version 875114
  I tried to erbuild the mbr, the boot sector and the boot.ini, but no success yet a screen is blue with 0x00000007b
  any new idea

  Yes, something is not in communication with the pilot vstor2:

  2013 04-07 T 14: 13:11.545 + 02:00 [info 09908 "Default"] [, 0] Vmount library: 1450 error communication error with the pilot while
  2013 04-07 T 14: 13:11.545 + 02:00 [warning 07680 'Default'] [, 0] error 999 (hive to load error: unknown error 999 (0x3e7) (999)) temporary hive loading

  1450 error is "insufficient system resources exist to complete the requested service."

  999 error is "error performing a paging operation."

  Both are unusual. Try the task set up on destination VM, if the task fails you will need to restart the source machine and try to restart the conversion.

  HTH

  Just found/3 GB switch in your boot.ini file, there are rumors that sometimes you should remove this switch for successful conversion: http://communities.vmware.com/message/1708679#1708679

• ESXi 5.1 - insufficient resources to meet the level of failover configured for vSphere HA

  Hi, I tried to understand why there are insufficient resources to supply an only little VM in my vSphere cluster.

  2 X 5.1 ESXi hosts

  Each host has

  2 x processors (8 cores each) with HT active

  192 GB OF RAM

  vSphere HA has been activated.

  Admission control policy set to "tolerate failures of the host in the cluster" with the value 1.

  With 2 GB of vRAM and 1 vCPU has created a virtual machine.  No memory and CPU Hotel booking.

  I put one of the host in maintenance mode and try to turn on the virtual machine, but it failed to power upward with the error "insufficient resources to meet the configured switch level for vSphere HA.

  Am I missing something?

  Thank you

  Alex

  I put one of the host in maintenance mode and try to turn on the virtual machine, but it failed to power upward with the error "insufficient resources to meet the configured switch level for vSphere HA.

  When having two hosts only no host doesn't stay for failover when one of these hosts are in maintenance mode... That is why it gives you this message...

  / Rubeck

• get the conversion failed on the export of PDF files.

  get the conversion failed on the export of PDF files.

  Hi jfcobb999,

  I'm sorry that you are having problems, file conversion. You convert the web interface, or through Adobe Reader? You have a large number of files in the folder root of your list of files on Acrobat.com?

  Try to start these things:

  • Empty the cache of the browser, and then try again.
  • Use another browser.
  • Make sure the drive is up-to-date by selecting help > check for updates.
  • If you have a large number of files on Acrobat.com, some of them move in a subfolder.

  Please let us know how it goes.

  Best,

  Sara

• ORA-31061 XDB-error: special tank tank escaped conversion failed

  I build a script to export data in a table to an xml file. After that, I came across this error: ORA-31061 XDB-error: special tank tank escaped conversion failed.
  
  I have reduced the problem in 1 column and now knows that this query will trigger the problem:
  
  Customer OF SELECT XMLELEMENT ('name', lastname)
  
  clearly, there are some lastname in the array that contains some sort of bad character. The table contains 24,000,000 customers.
  Is it possible to know what record (or records) are the cause of the problem?
  
  Version information:
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for 64-bit Windows: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production

  Erik_NL wrote:
  WE8MSWIN1252

  Oracle recommends to use Unicode (AL32UTF8) as the database character set. Anyway, I'm still not sure that the problem is necessarily tied to the character set. So, as you suggest, it might be useful to have the list of family names is generating the error.

  You can try something similar to the following:

  CREATE OR REPLACE TYPE names_ty IS TABLE OF VARCHAR2(50)
  /
  
  CREATE TABLE bad_names(lastname VARCHAR2(50) NOT NULL);
  
  CREATE OR REPLACE PROCEDURE logBadName(p_name VARCHAR2)
  AUTHID CURRENT_USER
  IS
      PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
      INSERT INTO bad_names(lastname) VALUES(p_name);
      COMMIT;
  END logBadName;
  /
  SHOW ERRORS;
  
  DECLARE
      customersNames   names_ty := names_ty();
  
      BAD_NAME_EXCEPTION EXCEPTION;
      PRAGMA EXCEPTION_INIT(BAD_NAME_EXCEPTION, -31061);
  
      xmlInfo     XMLTYPE;
      idx         PLS_INTEGER;
      lastName    VARCHAR2(50);
  BEGIN
      SELECT lastname
      BULK COLLECT INTO customersNames
      FROM customer;
  
      idx := customersNames.FIRST;
      WHILE idx IS NOT NULL LOOP
  
          lastName := customersNames(idx);
  
          BEGIN
              SELECT XMLElement("name", lastName)
              INTO xmlInfo
              FROM dual;
  
              EXCEPTION
                  WHEN BAD_NAME_EXCEPTION THEN
                      logBadName(p_name=>lastName);
          END;
  
          idx := customersNames.NEXT(idx);
      END LOOP;
  END;
  /
  

  And finally the rows in the bad_names table will give you the information you're looking for.

  I hope this can help you.

  Kind regards
  Dariyoosh

  Edited by: dariyoosh June 4, 2013 08:32

  Edited by: dariyoosh June 4, 2013 09:47

  Edited by: dariyoosh June 4, 2013 09:48

• Nexus 1000V for vSphere 4.1

  Will there be an updated version of the Nexus 1000V for vSphere 4.1, or is the last compatible version?

  Current is compatible and included for vSphere 4.1 Ent more.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• Hello from Firefox can be used for group conversations?

  Firefox is heavily used at my company and I would like to add Firefox Hello for seminars and online training for our employees in the field. Is this possible? Multiple users in a conversation in Firefox Hello?

  Hi Pasquell31, Hello to firefox at the moment cannot be used for a conversation between two people.
  multi-party videoconferencing is on the roadmap to long term, but it will take a lot of Engineering (Hello firefox is based on the webrtc standard which is a peer-to-peer protocol between two machines-multipart calls can be a rather difficult thing to understand on this basis)

• Help. Temp for voltage conversion.

  I'm currently trying to find a best way to calibrate the thermocouple read outs. I would like to be able to enter any temp for all TC and labView output the corresponding voltage. So I was hoping someone would have a way to make this temp for voltage conversion. Example if I want to do 250 C I need 10.153 mV how labView could be made to calculate this.

  This will allow you to enter the temperature you want for the simulation and corresponding voltage.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The request for VP protection failed. What can I do?

  Hello

  When I opened my computer appears a message indicating that the application for VP protection failed. First appeared this message, I went to see the resolution of this error, I think it was this number: 0 x 80070020, and he says that the first windows must be updated, and then if that failed there was another of the options that I have didn t have to do because I just updated my windows xp. Then after a day or two, appeared again the same message and I Don t know why. Ever since I can´t use internet explore and open can´t the window updated via internet to run windows update again. In the meantime, I used ccleaner and runned superantispyware and then tried to throw the disc difragmenter and it just take so many days to put an end to this task that I have Don t think it is normal at all. Please, is - anyone has an explanation for this? Also, I realize that it affects me the speed of my computer and some programs like Skype that takes a long time to open and doesn´t allow me to add new contacts, ex, and other negative thing is that when I open mozilla firefox, it doesn´t open with the home page that I put in place! I Don t understand whyThanks.Thanks

  Hi Anarim,

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• ANY update for Silverlight will fail: it will download but not install

  I have Windows 7 Edition Vista Home Premium; and noted that for several years ANY update for Silverlight will fail: it will download but not install. I understand that a seller of windows is not installed, looks like mine done in ' 05.There is something on the part of Silverlight is not signed digitally.  My record of updates shows NOTHING for Silverlight. There is a single entry, "Microsoft Silverlight" in the updated register and register the program. I can't uninstall, even by Microsoft'sIlverlight Home Page on an installation or uninstall. Been through the web, don't want to spend $ on something I don't know. What I have has been disable Silverlight to add it in the menu under Internet Options.

  Anyone know how to get rid of something to do with Silverlight? With thanks... LarryWX.

  Go to \program files\microsoft silverlight and delete the folder.