Hyperion S9 shared s. and Open LDAP services cannot start.

Similar Questions

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• Cannot install SP1 - repair service cannot start your computer

  original title: try to install Norton 2012

  I can't install Norton 2012. It says I need service pack 1, when configuring her repair service cannot start your computer and then installs nothing

  Microsoft Windows Vista® (32-bit and 64-bit) Starter/Edition family Basique/Familiale Premium/Professional/Ultimate Edition with Service Pack 1 or later is the minimum requirement to install Norton 2012.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Directory services cannot start SBS2003 lsass.exe error?

  Hi all

  I have a SBS 2003 server who gave a customer who seems not to start windows.
  It gives 0xc000007a error code (Directory Services cannot start because the specified procedure could not be found).
  After finally the local Windows password reset, I am now faced with another problem, how to solve the problem I have for the first time to the difficulty.

  I've done some commands listed on the Microsoft article http://support.microsoft.com/kb/258062, nothing helped.

  I've already run the disk check, but it is impossible to run a repair on the installation because it shows the same error

  Does anyone know how to get the server to start successfully, without the need to reinstall Windows?

  System Spec: -.
  2 x Intel Xeon processors
  4 GB of DDR2 memory
  company 3x250GB WD HDD (Raid 5 with parity)
  Quantum Ultrium 2 tape drive

  Hello

  Thanks for your quick response to my post. I recently decided to reinstall the OS due to time constraints,

  Thank you

• in the past, you could close firefox, but he recalled the pages or tabs you had open and open again when you started upward. Is it still possible today?

  In the past, you had several ways to close Firefox. Just close it with the loss of the page, or close, but remembering the pages where you were, then they open again once you started Firefox later. Is it still possible?

  See also:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

• vCSA vcenter service cannot start

  I use the trial version of the device of the VirtualCenter server in our lab are fine POC development.

  I can get the deployed ovf and the vcenter server has started.

  If I configure the vCSA without changing the hostname, the vcenter service starts and I can access the app from vcenter through VIC, connect my host, etc..

  The problem is when I go to change the host name of the application of vcenter just going down the Hill. The embedded DB cannot update tables, vcenter service will not completely start and the vcenter is inaccessible.

  I tried removing the drive and redeploying a few times now and not can't find a work around for this.

  Any help would be welcome.

  Notes: I used the following forum to help you, what helps me it to certain things.

  http://t.co/QwBqlVaP

  I suggest that configure you the host name and the network before configuring the database.

  For example, see http://jreypo.wordpress.com/2011/11/29/vcenter-server-appliance-part-1-configuration-and-deployment/ for a description.

  André

• Windows Firewall and Windows Security Center cannot start. In addition, no WSC in the services.msc list. What should do?

  Hey guys. I looked up and down for a solution to this problem.

  I already tried this solution:

  http://blogs.technet.com/b/asiasupp/archive/2011/12/27/error-code-0x80070424-with-Windows-Firewall-and-quot-base-filtering-engine-service-quot-not-available-in-services-database-list.aspx

  Although the only problem is at last step when I turn on the firewall Windows or WSC (windows Security Center) since neither of them are present
  in the list of the services.msc.

  So here I am without any windows security, no firewall and no updates. I really need help here. I was attacked by malware, a day ago, and everything happened after that. I removed the malware with program ESET NOD, but it seems that the malware corrupted my registry/safety inputs.

  Thanks in advance.

  Hello

  I suggest you run both the fix that he mentioned below and check if it helps!

  · Resolve security issues to protect and secure Windows automatically

  · Automatically repair the settings of Windows security to secure your PC

  I hope that helps!

• Windows vista 32-bit error code 0 x 80070424 - the Security Center service cannot start

  Hello.

  I have Vista Home premium SP2, 32-bit operating system. A week ago, I received a .rar file, Avira has said has been infected. I did not open the file, I deleted, ran a complete analysis of the system and assured there was no residue. However, after that, I realized that the defender was not on and then realized that my firewall did not work either.

  Specificities of each:
  (a) it seems that my firewall has disappeared, and specifc messages I get when trying to turn on my firewall is: "could not start the Security Center service. When I run services.msc, I am not at all a security service, all I have is a security accounts manager.
  (b) when I try to activate Defender, I get the error code 0 x 80070424. «Windows Defender encountered an error: 0 x 80070424.» The specified service does not exist as an installed service. »

  I tried 5 different Microsoft its difficulty, but none have worked so far. I also tried to reinstall Windows Defender, but Microsoft said that I installed it. All updates are underway. I followed the steps in this link: http://support.microsoft.com/kb/968002 and no. chance either. I used additional resources and tried following these steps also, but all services have already started on my system.

  Can you help me please?
  Much appreciated,
  ~ naila

  Hello nailal,

  Please follow the advice given in the article below:

  Article number: 968002 -.

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall Please reply back and let us know if this can help. Thank you Marilyn

• Services cannot start Windows do not (MMC errors)

  I'm new to Microsoft Answers.

  I'm having a strange problem. Yesterday when I turned on my computer in the morning, I realized that Firefox, Windows Media Player, Avast, security Windows, Windows Search, Windows Update Center and possibly more programs or services would not run or run correctly.  I can't imagine what I did which would lead to this problem.  I tried a system restore, but that does not solve the problem.  I scanned with 4 different antivirus (with installed both 1) applications and nothing was found.  The problem seems to be with Windows Services won't start do not.  There are 5 services in the Microsoft Management Console is configured to start automatically, and possibly others built in the manual which do not start. Attempt to start manually generates them an error and that the problem is not resolved.  Here are some of the errors I receive:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process.

  Error 1053: The service did not demand launch or timely control.

  the service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Error 1297: A privilege that the service needs to function properly does not exist in the service account configuration. You can use the GPMC Microsoft (MMC) Services (services.msc) snap and snap MMC local security (secpol.msc) settings to display the configuration of the service and set up the account.

  I tried a solution online that suggested the layout "NT AUTHORITY\LocalService" under "this account:" field in the dialog box properties of the service of a donor, but that does not work either. My system is also significantly more sluggish, with the CPU at a constant 100% and I can't install software (for example, Google chrome would not install but Opera would be.)  The installation wizard is not just open for Chrome). Open the Microsoft Management Console runs also on global blocks (it is not just the MMC that does not).

  Any help would be appreciated. I am running Windows Vista Home Premium SP2

  Service permissions seems to be different from XP in Vista.  In XP load you a security template and then adjust through which access permissions.

  It is possible to download for Vista security models and then try this method of adjustment of Service permissions.

  Security templates in Windows Vista
  http://www.vistaclues.com/Windows-Vista-security-templates/

  Windows Vista Security Guide
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a3d1bbed-7f35-4e72-bfb5-b84a526c1565&displaylang=en

  In addition to malware made some deep looking for RootKit infection?

  RootkitRevealer v1.71
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb897445.aspx

  A Format and Reinstall after saving valuable data, may be the simplest solution.

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Windows 7 Enterprise 64-bit - Workstation service cannot start (mrxsmb.sys)

  Recently, I applied all the patches to my laptop HP 6930p including KB978251.  After the reboot, I was unable to access network shares or use integrated authentication.  A little digging in the case of newspapers found that the workstation service is not started because mrxsmb.sys failed to load.  Due to the number of patches and a few other installs this patch system restore point came out the list of available rollbacks so I uninstalled the update of the control panel and restarted.  No chance after the restart and I checked the mrxsmb.sys file date/time stamp, and it's always the patched version.  Ideas on how to find and manually restore this file back to the previous version?

  Thank you in advace,
  Jim

  See the section "How to get help" of http://support.microsoft.com/kb/978251

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Search service cannot start the system cannot find the path specified.

  The last important thing I did was to create a new user account.  Not sure how long the summer passes, I'm not looking that often.

  I can find how do, I just need help to find out what it is I do.
  Log name: System

  Source: Service Control Manager

  Date: 15/02/2012-17:22:45

  Event ID: 7000

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: PC-user

  Description:

  The research service Windows could not start because of the following error:

  The system does not have the specified path.

  The event XML:

   

     

      7000

      0

      2

      0

      0

      0 x 8080000000000000

     

      326251

     

     

      System

      User-PC

     

   

   

      Windows Search

      %%d Ko

   

  Oops, I got it.   I went to turn on and outside research turned rebooted windows features. Here again, to turn back and after another reboot, I'm back in business.

• Search service cannot start Windows only not in WinXP Sp2

  Hello

  I'm not able to start the Windows Search service. When I start it, it gives "error 1068: the dependency service or group could start '... But I can see the exchange of computerized data (RPC, Remote Procedure Call) began the dependency service... Can u please help me out here...

  I'm not able to start the Windows Search service. When I start it, it gives "error 1068: the dependency service or group could start '... But I can see the exchange of computerized data (RPC, Remote Procedure Call) began the dependency service... Can u please help me out here...

  SP2?

  You can first fix.

  WIndows XP SP2 support ends in July 2010.

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Cannot start Service Essbase

  Hello
  
  I work under Hyperion 11.1.1 and I have error.
  
  I want to start Essbase service in order to use MAXL / Essmsh, but the Essbase service cannot start. The service starts manually as usual and path to the executable file on C:\Hyperion\products\Essbase\EssbaseServer\bin\ESSBASE.exe
  
  When I tried to find the folder and run essbase.exe the error indicates that the name of the service is bad (Hypservice_1) and not found.
  In fact the Windows service, the full name is ' Hyperion Essbase Services 11.1.1 - hypservice_1.
  
  Anyone has idea about this problem? Let me know, thanks.

  These messages are simply put in custody and are common, there must be other information recorded in the window on essbase start?
  It is also useful to check the logs in C:\Hyperion\logs\essbase\ essbase.log and SharedServices_Security_Client.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/