Hyperion uninstall stuck on Initializing

Similar Questions

• MFP M225dw: Printer stuck on 'initializing '.

  I bought the printer in February 2015 (less than 6 months ago) and on my network without wire (connected via surge protector which was brand new).  Everything was excellent until a week ago.  Aware of the printer went away, and when he came, he remained on the screen during initialization.  I let go 48 hours without change.  I have unplugged for an hour and replugged it in, no change.  I unplugged for 3 days and tried again, no luck.

  I came on the forums and tried the steps recommended in another post:

  Tried a hard reset (disconnect while remaining on and wait 60 seconds, reconnect to a wall outlet)-nope

  Tempted to drain power (unplug everything in now the power button / Stop button for 30 seconds)-nope

  Tried to update the software from HP Support Assistant on my computer, all updates current and no change

  I even went as far as uninstalling the printer and the software from my computer and attempt to connect via a USB connection - the solution was problematic, because the printer never have to ready mode to install the software.

  Attempted to intall for wireless network, but I get to the menu on the printer because of its being stuck on initializing wireless.

  Need help please, I'm more frustrated by the day and can't go much longer without the printer.  I invested more money to ensure that I had a reliable quality printer.  Cheaper printers does not fizz out on me this quickly!

  Hi @KJUser,

  I see by your post that the printer is locked during initialization. I want to help you.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• M177fw MFP: MFP M177fw stuck at initializing

  «Hi there, then put in place the printer by the book / manual.» I am able to scan documents using the HP software, but I can't print anything. The touchscreen is stcuk to "initialize". The M177fw and the laptop are connected in WiFi.

  When I click on the 'status' button of supplies, the text on the touch screen becomes to XYZ color, but this task is never ending. Any number of reboots always shows "initializing". Please let me how can know I do this printer print documents.

  Thank you

  T HP

  Hi @T-HP.

  Thank you for joining the HP Forums!

  I noticed your post on how your HP Laserjet M177fw printer is stuck on initializing. And I'm happy to help you!

  Please first try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

  If the hard reset does not solve the problem, I also have you sent for a factory reset instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  We'll see what happens!

• How to clear an hp laser jet m1217nfw that is stuck on initializing

  printer flashing and stuck on initializing

  If the unit is locked during initialization, then it might be something in the firmware of the printer.  Before you perform a reset, make sure that all the troubleshooting steps are completed.  I'll link the document to troubleshoot a non-responsive printer below.

  The printer will not turn on or respond

  If the steps do not help, then follow the reset of the information that I will send you via private message.  Before this type of reset, please read Bob_Headrick wire on the reset of the printer.  This thread can be found here.

• I had problems with the color mode. kept, restart photoshop to find the problem. NOW Photoshop CS6 will not organize, it is stuck on "initializing". How to start?

  At first my documents were pasted on the CMYK color mode, and I couldn't understand how to convert the file in RGB.

  Finally, I abandoned, saved the file and tried to present what I was working on a Web site.

  Before that, I closed photoshop and he raised 2 times in a row to test color on profiles. When finally it seemed to me he decided to go back to RGB, I closed and returned to climb my image. However, the site did not accept it because the jpg was in CMYK. So, I went to relaunch photoshop to convert its color profile and now photoshop will not launch.

  As a first step, it got stuck on "checking memory."

  I closed my computer to see if this would clearly be the question, then tried to restart photoshop and it is now stuck on "initializing".

  I really need photoshop work, so how can I solve this problem?

  Laptop: The Retina of Macbook Pro screen

  OS: OSX 10.11.3 EL Capitan

  PS: Adobe Photoshop CS6

  It is the first time that I ever had this problem, and I've had this program for 2012.

  Hi shiblets,

  Please press the home button on the keyboard when you see the screen "initializing".

  If it does not, please press the SHIFT key and then launch Photoshop, to ignore the third party Plugin.

  Kind regards

  Tanuj

• After Effects stuck at initializing MediaCore

  I have not used After Effects in some time, and after starting it recently that I quickly stuck on "initializing MediaCore.

  I tried:

  -Updated all my programs, drivers, and the after effects itself (Lateset CC version)

  -Reinstall after effects, Photoshop, Quicktime

  -Remove all plugins

  -Removed preference files

  -As Admin

  -Deletion of AE all files associated with

  Here are the errors I get:

  SplashScreen starts normal but the text simply says "Initializing MediaCore '

  Freezes for 1-2 Minutes

  SplashScreen farm

  This set of errors pop up:

  "Library of Photoshop failed to load. PSD files will not be supported. You may need to reinstall. »

  Then "After effects WARNING: unknown Exception.

  Then "after effects error: cannot unlock an unlocked list.» (4: 27)

  Then "after effects error: current Crash.". Last logged message was: 7116 > < GPUManager > < 2 > Sniffer result Code: 3

  This error is sometimes different

  And finally the last one said after "than the effects could not sue sorry... »

  Thanks for any help!

  If you have tried everything in this link: Hang | Initialization MediaCore | Splash screen:

  Can you show the screenshots of what goes wrong in the CC 2014 and 2015 CC?

• When I open it gets stuck on "initializing installation" and the green bar does not move. How can I fix it so it installs?

  The installation program of Adobe cloud downloaded on the internet perfectly but when I open it stuck at "initializing installation" and the green bar does not move. How can I fix it so it installs?

  Multiredwolf123 did you use the steps listed in the "Failed to install" error request Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to solve the current error?

• I have a lot of programs that I want to uninstall and I initially installed but cannot uninstall them.

  I have a lot of programs I want to uninstall and I have installed initially.   I have full access to these programs.  However whenever I try to delete them, I was invited with the message "access denied."    Now my C drive is almost full and I just want to send unwanted expansion of road programs and remove those that I don't need.  Why I can't get rid of them?

  See if this helps:-

  http://www.ComputerActive.co.UK/CA/download-review/2040736/remove-unwanted-software-Revo-Uninstaller-19

  If she please vote as helpful.

  Thank you.

• Current uninstall stuck

  I went to prepare a cluster but the hosts never fully installed. I thought I would uninstall and give him another chance. All hosts in the cluster are now 'In progress' with the State of the cluster "uninstall." It has been like this for more than a day now. I rebooted all hosts several times and checked that the VIBs have been removed. So the Director and the controllers were restarted. Is anyway to reset the cluster or complete the task of deleting?

  Thank you

  Will be

  The vibs had already been uninstalled, but the task was still hanging. I was able to work around this problem by cutting each host and adding to a different cluster. I deleted cluster that was stuck and was able to prepare the hosts in a cluster. He even kept track of edge NSX gateways that were on the hosts when they moved. The only thing I lost was the VM folder structure. The hosts installed without problems and have been added in my area of transport.

• OfficeJet Pro 8210: Officejet Pro 8210 Stuck on initializing loop

  Hello

  Unfortunately, my printer is stuck in a boot loop, even though installation on my PC says the printer is configured and ready to use.

  I loaded the printer with paper, ink and done all the steps described in the instructions supplied with the printer.

  Thank you for your help

  HI Francois,.

  Have you tried to reset the printer unplug it while it is on and leaving it for a few minutes?
  Maybe it will go beyond this phase of initialization in this way.

  Jean

• Pro M177fw MFP stuck on initializing

  Brand new, right out of the box. Here's what I saw: the initialization is not complete, but I can tap on the Home icon. Noticed a symbol above the button of toner. Please I need your help fast. Thank you

  Hi @SangPham,

  Welcome to the Forums of HP Support!

  I understand that you are having problems getting your new HP Color LaserJet M177fw MFP Printer Pro installation. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that has not finished initializing and toner light is to inform you of a problem. It seems that some packing material has not been removed. Please take a second look.

  Use this guide to get instructions on how to properly load the toner cartridge in the printer: setting printer to printers HP Color LaserJet Pro M177fw multifunctional material upward.

  If the problem persists, please contact HP or put the printer in the point of sale.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• lazerjet m1132 mfp: Hp lazerjet m1132 mfp is stuck on initializing

  When I turn on, it works and stops, but keeps flashing as if it is still initializing. This came after, when I tried to erase the E6 error code. It analyzes well but can not print and copy. What could be the best solution.

  Hey @Chryc1,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with a warning light flashing on your printer Laserjet M1132 range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot fixed light or flashing on the printer.

  Please let me know the results after following the above. If you still have questions, please let me know what lights are on on the printer. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Photoshop won't open Stuck on "Initializing Menus"

  I tried several times to open PS, it goes through the motions and then hangs on "initializing Menus".  I have re-installed and still no change. Any ideas?

  

  Hello

  Two things to try

  (1) hold down the SHIFT key, and with the key launch Photoshop.

  If Photoshop takes over then you have a broken plugin filter

  (2) press ctrl-alt-shift on command-option-shift Windows on a Mac. With the still depressed keys launch Photoshop.

  A dialog box opens allowing you to remove your preferences settings.

  Hope that one of these two works

  Terri

• Impossible to run applications CC and impossible to uninstall - stuck in the circle of the error.

  Downloaded the Suite CC, habit run when I click on any of the programs, won't let me uninstall, when I try to uninstall all of the programs; Errror says - I need of application manager. So I download and run application home manager says Setup could not initialize and I need to download the adobe support advisor - but which was interrupted... Help!

  Run Dell Latitude 5540

  Win 7

  16 GB of ram

  Intel i5 cpu clocked at 2.6 ghz

  uninstall all cc (uninstall the Adobe Creative Cloud desktop application)

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud