Cursor on my Tecra S1 problems

Similar Questions

• Power on Tecra M2 problems

  My Tecra M2 will be commissioned, but the battery is still dead, if I remove the battery and just use the power cord that the machine starts up nice work as it should then just cut, after five minutes.

  Also, it starts with the battery and the power cord but after five minutes, as before but flashes then dies.
  If I let the machine closed to recharge it charges for five minutes before the power supply green led turns off with the amber battery light. Then the power cord light flashes in orange.
  I have to unplug it and remove the battery to make it back to the State of charging.

  The machine was working fine before and runs on xp pro.

  On this virtual path, it is not easy to say what is the problem, but after reading your ad, I think that your Tecra has problem with electronic control gear.
  To be honest I don t think you can do something about it.

  Of course, it can be checked by the service of Toshiba, but I think it's too expensive for this old piece of hardware.
  In my opinion you should backup all your data and sell it on ebay. Someone can buy it to use different hardware components. I think it's time for the new laptop computer.

• Cursor jump - is NOT a problem of keyboard!

  Windows 8. My mouse jumps at the beginning of almost all fields of text every few seconds. Note that this is not random jumping - the cursor jumps only at the beginning of the field. I say "almost all" because this forum post is the first I've found where it does not. The problem never happens offline programs, the toolbar or login form fields. Only the fields of text in Firefox. Cannot duplicate in Chrome. I was typing stuff in my word processor and then copy and paste to get anything done on my blog or email. Restarted my computer, and then uninstalled and reinstalled Firefox. No improvement. I tested and is not remotely to a keyboard problem, such as cursor more jump.

  See what is happening in Firefox Safe Mode.

• CD/DVD Tecra A2 problem

  Was a problem with my carpet * a reader of DVD-RAM UJ 820 S on the Toshiba Tecra A2.

  Was working fine until I tried to copy songs from a CD on the computer, on which he could not complete the operation and seemed at hand making a sort of buzz.

  I cancelled the process and released the CD but although CD I put it it doesn't recognize it and if I go to D: / (CD player) he says the disc has 0 bytes used space and free space of 0 bytes.

  Windows offers everything goes well and I tried to play with the drivers, but of course, as I have the actual driver on a Toshiba CD I can't do anything with that!

  Kudos to anyone who can give me advice,

  Mark

  Hello
  seems to be that your DVD-Ram has a malfunction.

  Just to ybout sure, try to start from a CD or DVD in Dos Mode. If this also fails, contact a Toshiba Service Center for control of your laptop.

  Good bye

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

• Display Tecra S1 problems

  Hi guys and girls.

  Looking for assistance or technical advice regarding Tecra S1 my nephew who had a problem of unusual screen for a few weeks.

  The laptop was working fine until about 6 weeks ago, when all of a sudden, the screen could not operate on initialize toward the top. The exact symptoms are the following:

  1 screen comes with black (power off of the State) to a dark gray on startup reported no beeps at startup. Indicating that light was operational?

  2. external monitor has been attached and portable started with photo as usual. However, the photo could not be changed between laptop and external monitor via "Fn" + "F5" key and laptop screen just went to dull grey screen as mentioned previously.

  3 battery has been taken out and replaced after awhile. Power Pack was plugged into the laptop. Still no splash screen.

  The laptop was then left for a few weeks and I started to study further today. On booting, I found that the battery was dead, then insert the power supply charger to find... the laptop booted up on the first screen!

  This could be purely a matter of Ribbon display? I am aware that the ribbons in most laptops can be affected due to running through them the hinge connecting the main body and showcase.

  Thoughts and comments would be appreciated.

  It could just be a bad connection tight behind the screen, reseating the cable can be operated again.

  If not, it may be a hardware problem as a faulty LCD or motherboard. A Toshiba repair center can give you a quote for repair.

• Tecra S1 problems after SP2 installation

  I have a problem when I use SP2 on my Tecra S1. After you install SP2, my pc crashes when I use the function 'stand by' or 'Hibernate '. It comes with a conflict of interrupt on irq 11 and begins to restart again. Whenever the pc starts again, the blue screen appears with the problem to irq 11 and the program that does, it apears at the bottom of the blue screen, should be "gv3.sys. I did al updates on ' information to update the driver for Windows XP with Service Pack 2 - v1.1.pdf ", but without success. The pdf file say I need to update the driver power saver to version 1.00.34M version, but I can't find it on the site. I use the Dutch version of WXP and the only driver I can find on the Web site is the 1.00.32M version and the English version is the 1.00.34M, so maybe that's the problem. I tried with a clean version directly from the restore CD but I came up with the same results.

  Who can help me to fix this, or point me in the right direction.

  Hello
  you are absolutely right! The 1.00.32M version is the most recent for your machine (for the Netherlands).

  Do not irritate cause there is a version higher than for other countries. The functions are equal.

  Try again with this version and keep us updated, please!

  Good bye

• Computer block, the cursor moves, El Capitan software problem?

  Hello

  I had a problem with a computer that I just bought. It looks and works very well, but occasionally it freezes and only the cursor can still be moved. The only way to turn it off is to unplug the power supply cord through. If I restart it, it works fine, until it happens again (three times in a period of about six hours today). I went to the Apple store and they tested all and any equipment checked OK. I had just erased the disc and then reinstalled El Capitan, but it happened even before I did. There is no other software on the disk, only El Capitan. The computer has a unique key of 4 GB, and I was wondering if maybe that could be the reason, that it should simply have more RAM and two identical sticks together?

  The last time I was on the Apple store, there is no newspaper on the computer because I had erased the disc, but now it should be, so I guess I'll be back to see if they can find anything.  During this time, is that what someone had this problem? The 'genius' last time said he believed it was probably a software problem, in which case it will take El Capitan, or at least of Safari, which is what I used whenever this happens. When I erased the disc, I deleted the version back from the drive, do not know if the top would have been better, or if it could make a difference. In addition, it often happened when I was on a site as a banking site, that may take more effort to load.

  Specifications are: iMac, G3 mid-2010, processor, 4 GB of memory (single stick of Crucial), El Capitan running.

  Download, install and run Etrecheck.

  Etrecheck was developed as a simple tool for Mac diagnostic report by a regular user of the forum of Apple in charge and the technical support employee named Etresoft. Etrecheck is a small discreet soft that compiles a snapshot of your system Mac hardware and software installed.

  It is a free application that has been honestly created to aid in the diagnosis of problems with Mac running the latest versions of Mac OS X.

  It is not a malware and can be downloaded and then installed on your Mac.

  http://www.etresoft.com/etrecheck

  Copy/paste and publish his report here in another thread to answer so that we have a complete profile of the material of your Mac and installed the software so that we can all help with your Mac performance problems.

  Thank you.

• Tecra A11 - problems of the more recent/video BIOS

  Hi all

  I just got a Toshiba Tecra A11 the other day which is out of warranty (Refurb). When I got the laptop there is a problem where the photo was displayed at 1024 x 768 and biased (in BIOS). Image 1-2cm off the screen to the left, with over the space of 5-6 cm black to the right of the picture, the low 2-3 cm of the image were also the bottom of the screen.

  I installed Ubuntu Studio initially and attempted to force the display to a wide screen resolution. I didn't have a chance, I also installed Win7, but still with the latest drivers, I had no chance.

  It was strange because the BIOS was displayed in the same way, so, naturally, I decided to upgrade to the latest version of the BIOS. The BIOS of the laptop is quite old (end of 2009).
  I downloaded the update to the BIOS of Toshiba web site and ran the update.

  The new BIOS has been installed and rebooted the machine.
  However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  My question is: what can I do to fix this? Is a tool of recovery or down to BIOS available? Is it possible to reflash the bios? What is recommended?

  Thank you.

  > The new BIOS has been installed and rebooted the machine.
  > However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  This means that everything is ok with the external monitor?
  You can access the BIOS by pressing F2 and you can set it to the default settings?

  Usually, you can switch between the external and internal view using the FN + F5 key combination. It work?

• Audio driver on Tecra A8 problems

  We have a set of about 20 of Tecra A8 in our society. All of our updates are controlled by a local windows update server and all the new windows updates are approved by week. Some of the A8, after an unknown update had any audio just stop them working.

  We have tried to reinstall the Realtek drives, but nothing has changed. But when we use a utility that extracts a functional A8 readers and install it on the faulty A8 audio suddenly starts working again.

  Any ideas how we can solve the problem without having to use a 3rd party tool? Update of readers? Windows update specific we would have maybe on an A8?

  Could you please tell me if the SP3 for XP (I guess only you´re with XP on your machines) was already installed?

  First I would recommend you to check if the KB888111 is installed. Microsoft has already published one, but previous versions has not worked properly and now they come out a modified version of the KB888111 so he should fix the problems with your sounddrivers and internal sound architecture in windows.

  Otherwise I suggest a single machine and let windows performs a full update. After the windows update, check that the sound works and reinstall the KB888111. If this brings no solution, then remove step by step just recently installed windows updates and check if the sound works.

  It s delicate because the drivers/windows it s related question, but I suppose it must have something to do with the UAA (Universal Audio Architecture) of Windows XP...

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• TECRA M1 problems

  Hi all

  I use a two years Tecra M1, PM 1.6, 512MBRAM, WinXP SP2. It seems to me that my laptop have problems.

  1. He starts and stops very slowly. Need more than 15 minutes to start.

  2 HDD was noisy with ek ek ekk .even if I haven't run any software application.

  3. it runs very slow even with very simple software application such as Microsoft office. It take a lot of time to read and save a file. Similarly, I have to wait for about 30 seconds - 1 minute for the computer to answer a few buttons; for example, start Control Panel - System Configuration.

  4. If I opened several application programs and I have activate a program using ALT + TAB, the image of the program be activated appear to be blurry and take a few minutes to display clearly.

  I reinstalled the operating system by using Recovery CD and installed only a few popular applications such as Microsoft Office, EndNote, and Norton Antivirus software.
  but he couldn't help.

  I tested the performance of s to laptop using PassMark Performance Test Version 5.0. The result showed that CPU and memory seemed to be OK but the performance of the hard drive was not good (in my view).

  -Sequential read: 2.3 MB/second
  -Sequential write: 1.1 MB/second
  -Random Seek + read & write: 0.69 MB per second

  Do you think that there are some problems with my laptop HARD drive?

  Last year, I also found the disk HARD was noisy (I used other laptops Toshiba "lower quality", but I never heard this unpleasant noise). I brought my laptop to a service point and a technician said that the HARD drive is OK.

  Thanks in advance.

  Hello

  It certainly shouldn't take 15 minutes to load your system and with 512 MB of Ram you may be faced with the page or Exchange files problems.

  You should be able to hear a very slight noise of rattling your drive hard when it is used, but I would not describe this as being noisy.

  You could try to defragment your hard drive to see if it improves your response time, but I think you may well look a new hard drive in the near future.

  HTH

• Tecra R10 - problem unusual TFT screen

  My Tecra has developed a problem where a column of pixels seem to shimmer. Pressing the bevel directly under the affected screen area solves the problem but temporarily. Looks like something is loose - but what?

  Some things I noticed/tried:

  -Occurs in different operating systems and even on the splash screen
  N ' appear on the external monitor
  -Is not associated with heat
  -Is happening in different parts of the screen (even if a section is particularly prone to it)
  -Usually affects a section of the screen abot 3-4cm wide and goes from the bottom to the top of the screen

  Any ideas/thoughts?

  Thank you...

  Hello

  Depending on your diagnosis, it looks like a display problem.
  It of not a problem of graphics card because the external monitor seems to be OK.

  I don t think that something might be loose (cables, inverter fl, etc.)
  I think that his display, but of course, it's my personal opinion

  Perhaps a technician should take a look at this screen.

• Strange keyboard in Tecra S1 problem

  I have a problem with my Tecra S1.
  When I type a J I'll get 4 characters "qsd."
  With the am 'it gives' xcv. All other keys are ok...?
  I have the air of the keyboard is programmed or...
  When I boot with a bootable cd, I also get this problem...

  (Sorry for my bad English... :))

  Who knows about this problem?

  Thanks in advance!

  Hmmm. have you activated the keyboard FN + F11 or FN + F10 options?

  Notwithstanding these option may be enabled everything looks like a malfunction of the keyboard. In the worst cases, the keyboard needs to be replaced!

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them