"'Hzuwia.exe' has stopped working" error starting

Similar Questions

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• Cause green pixels in the clips "first elements.exe has stopped working error."

  I have a PAL - jvc everio camcorder. I copied the files from the camcorder to my computer. My computer is running Vista SP1 with 2 GB of ram.

  The files appear to be imported into PElements 4 However when playing or rendered clips I get an error first elements.exe adobe has stopped working.

  I noticed that the clips have green pixels appear at the place where the PE crashes.  All the clips seem to have this problem.

  I followed the suggestions of the basis of knowledge re: update codecs, disabling startup items, updated video driver.

  I don't have the cyberlink software provided with the jvc. I bought elements of first as I had read that he would be able to read jvc files.

  Someone at - it any other suggestions?

  See this thread... same camcorder... same problem. There are a few things to try:

  http://forums.Adobe.com/thread/389608?TSTART=0

• SQR.exe has stopped working

  Hi Experts,

  I came across sqr.exe has stopped working error when executing programs sqr across the line of control as well as reporting studio,.

  For some programs no error, and for some programs his complain above error after producing an output.

  Could someone help me solve this error.

  EPM installed 11.1.2.3 in windows server 2008 64 bit and using the SQL Server 2008 database.

  Thank you

  Aravind

  found the reason for the accident of the app. Its due to the 'USE database_name' command in the begin-setup section. I don't know why its causing issue. It TR supposed to work for the Sybase and SQL Server database but not work with SQL Server. in any case, I commented on this and gets the job done.

• Receiver error message: "systemprotector.exe has stopped working" whenever my computer starts.

  Original title: "systemprotector.exe has stopped working".

  I am on Windows 7 and I get this error systemprotector.exe ceased to function in a pop-up box every time my computer starts up.
  Whatever why is show, and how to fix it?

  Thank you.

  Hi Zachjd,

  Thank you for the question!

  It would be useful that you could answer this question to help you further.

  Have you done a recent software or hardware changes to the system?

  Systemprotector.exe seems to be an associated process of Advanced System Optimizer. If you have installed any Advanced System Optimizer, you can try to uninstall and reinstall the same and check if it helps.

  Uninstall or change a program

  Install a program

  If you need further assistance, please answer and we will be happy to help you.

• How to install a driver for f4500? Error dot4_plugin.exe has stopped working

  I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

  Help I am more than two hours in this and don't know where yet.

  I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

  Method 1: Perform a scan of the file system (CFS) checker on your computer

  Steps to use the SFC/SCANNOW command:

  1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
  2. at the command prompt-> Type "sfc/scannow"-> press enter
  3. follow on-screen messages to start the analysis of the system (this process can take a long time)
  The following will happen:
  Start of the phase of verification of the scanning system of-> % of full audit.
  4. once the analysis is complete, you will see a message with one of the following:
  a. not found any breach of integrity
  b. find corruption but repaired
  c. corruption that he couldn't fix

  Method 2: System Restore will take your PC to a previous state when the PC worked.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
  Type your password-> click continue (if you have one)
  2. in the dialog box the system restore-> click on a different restore point-> click Next.
  3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

• I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. »

  Original title: webcam inspiron 1420

  I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly.  I also looked and found something that seems to say that the app crashed.  Any ideas?   Thank you

  BFM

  Hi BartMorgan,

  ·         What is the error correct mrssage?

  ·         Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also check if the troubleshooting steps to help you in the article mentioned:

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612

  Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.

  Step 1: You can try to remove the webcam in Device Manager:

  a. click the Start button, in the start search box, type devmgmt.msc and press enter.

  b. in the Device Manager window, click view , and click Show hidden devices

  c. right-click on the webcam is installed.

  d. in the dropdown menu, click Uninstall or Remove.

  e. in the dialog box to confirm the device removal, click the OK button.

  Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.

  a. click Start.

  (b) in the search box to start, type appwiz.cpl and press enter.

  c. in the programs and features list, select the webcam program and Uninstall it.

  d. restart the computer.

  NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.

  I hope this helps.

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 error: "5487992.exe has stopped working".

  I have a Windows 7 machine and I started getting the following message: "5487992.exe has stopped working". The computer will function normally after you close the error for about 5 minutes, how the machine gets to the login screen. If I log in as usual I receive the same error message and return to the display of connection in 5 minutes again.

  I searched this error message and don't have wonder no results found. Any help would be greatly appreciated.

  Thank you

  Mike

  Hi Mike,.

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. It happens when you navigate to a specific application? If so, name the application you initiate.

  The causes of .exe error messages can vary considerably. However, most of the .exe errors result from a corrupted or damaged file ntdll.dll version itself, corrupt hardware drivers, or issues between Windows and other programs.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem exists, try the next method.

  Method 2:

  I suggest you to perform a file system (CFS) Checker scan to check the alteration of system files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.