I am in the region S.E.A. and can't buy a Lightroom 6 upgrade.

Similar Questions

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• hold the SHIFT key too long and can only type 1 hits a second...

  hold the SHIFT key too long and can only type 1 hits a second...

  You have turned on the FilterKeys , which slows down the speed of repetition of the keyboard.  To disable it, go to Control Panel > Classic view > Accessibility Options . Steve Winograd, Microsoft MVP (Windows desktop experience)

• in applications, the loading mark keeps appearing and can not complete downloading the trial of Photoshop and Dreamweaver.

  in applications, the loading mark keeps appearing and can not complete downloading the trial of Photoshop and Dreamweaver.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I lost 5 Lightroom bought in Dec 2014 and want to download another copy with a serial number.  It is not available on the site of Adobe Web and Im not interested in Lightroom CC.  Can you direct me to an appropriate site? Thanks Frank

  I lost 5 Lightroom bought in Dec 2014 and want to download another copy with a serial number.  It is not available on the site of Adobe Web and Im not interested in Lightroom CC.  Can you direct me to an appropriate site? Thanks Frank

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• I have installed and uninstalled SP6 from a CD and the CC PS repeatedly today and can not get either the version of the function.

  I have installed and uninstalled SP6 from a CD and the CC PS repeatedly today and can not get either the version of the function. I get the following messages: could not load actions because an unexpected end of file was encountered could not initialize Photoshop because an unexpected end of file was encountered could not initialize Photoshop because the preferences file was invalid (it has been deleted). I should have a clean install of programs. I tried one at a time in case they are somehow interfere between them.

  Try to run Photoshop and immediately press on and hold the keys Ctrl + Alt + Shift Windows CMD + Option_Shift Mac. Photoshop invite and ask you want to your preferences removed. Answer Yes.

• Can I buy 5 LightRoom and set the language for the Portuguese (Brazilian)?

  Can I buy 5 LightRoom and set the language for the Portuguese (Brazilian)?

  Yes, https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom

• HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

  So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

  Hello

  After the PC starts to open the window RUN and enter: MSINFO32

  If the BIOS on your PC version is version 8, and then review the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• Our daughter gave us his laptop HP that has no disk recovery or installation disk. There is now a message that the hal.dll is missing. Can I buy a Vista installation disk and fix it?

  Windows Vista crashed, and we do not have the original installation disc for Vista. Can you buy Vista Ultimate and proceed to install it?

  Hello

  Here are the different ways to reinstal vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  with HP normally press you F11 at startup to start the recovery process

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• After that windows update, the system stops without warning and can not perform restore

  My computer automatically performed an update on yesterday now it pc closes down without warning system will not perform a restore to an earlier date that I get a message that an unexpected error occurred during restore. I tried two different restore points, any help is appreciated.

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Cannot get SW1 to the second network of ping and can't get the HQ router to ping SW1.

  Hello the forum community.  I am new to Cisco Configuration and cannot understand why, in the attached packet tracer file, I can't have my SW! switch to ping to the gi0/1 interface of the branch office router and beyond.  I also can't understand why I can ping to the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 and beyond.

  Ideally, I'm trying to configure the network so that PC1 can ping 172.16.1.100, which is a loopback on router HQ.  I ping the closure of the branch office router, but not the switch SW1.  I cannot ping the gi0/1 interface on the router of the branch of the SW1 switch and do not understand why.  I can also ping the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 of the HQ router.

  PC1 - 10.1.1.100 255.255.255.0

  SW1 - VLAN 1 - 10.1.1.11

  Branch gi0/0 - 10.1.1.1 255.255.255.0, gi0/1 - dhcp assigned as 209.165.201.1 255.255.255.224, dynamic NAT activated with access-list 1 (permit 10.1.1.0 0.0.0.255), the pool name is NAT_POOL with the address range of 209.165.201.5 - 10 255.255.255.224 as NAT address range.  I can see it working with debug ip nat active when I ping the router address 10.1.1.1 HQ, although I have test the ping without NAT and it is always successful.  Gi0/0 inside the nat, g0/1 outside the NAT.

  HQ gi0/0 - 209.165.201.2 255.255.255.224, dhcp server enabled to provide an address for the router in branch gi0/1.  I had to add a static ip route 10.1.1.0 0.0.0.255 209.165.201.1 in order to be able to get the ping to the router HQ to branch router gi0/0 to work.  Don't know if there is a better way to do it, but it's the only way I could make it work so far.

  You will need to rename the .txt file, attached to. pkt.

  Thanks for any help!

  Hello

  The switch has ip routing enabled, if so disable it and give it a default gateway instead

  no ip Routing
  IP default-gateway x.x.x.x

  RES

  Paul

• BlackBerry Torch 9810 smartphones does not accept the App World Ts & Cs and can not install applications

  Hi, I had a search in the forums and knowledge base and has not been able to find an answer to this problem.

  I have a new Blackberry Torch 9810 on O2 to the United Kingdom. I have Blackberry App World installed and I have App update the icons in the my messages folder. Whenever I try to go to my Apps and install updates in the App World, I get the terms and conditions window if poster, I scroll down, click on 'accept' and the window disappears and nothing happens. I click on my Apps again, same thing, window appears again.

  I uninstalled App World and reinstalled and I still get the same problem, I can not get the Ts & Cs to accept so can't update my apps or install others. If someone else has had this problem and is there a solution?

  Thanks for your time.

  Ant

  OK... try this...

  (1) make sure that you already have the RIM desktop software installed on your PC:

  • http://us.BlackBerry.com/apps-software/desktop/

  and have executed at least once with your BB attached (so that it can do it's initial configurations).

  (2) attached via the USB port of your PC (the software didn't need to run)

  (3) launch the browser on your PC and go here:

  • http://appworld.BlackBerry.com/WebStore/

  Leave the plug in install and 'connect' to your BB ID account (via the browser/PC)

  See if that allows things to configure correctly.

• Are there improvements for photoshop affect problem of fonts? the fonts are very limited and can not download of new fonts!

  The fonts are very limited and cannot be upgraded. We are looking for the ability to download fonts, maybe google.

  Thank you.

  PS touch is not available more since May. If adobe does more maintenance. They promised a new application with the same functions end of 2015. I've not yet seen.

• I cannot activate the shortcut on your PC and can do no update

  I can not turn the schorcut on my p c and can do no update

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• I am from Bangladesh. And Bangladesh is not on the list of countries. How can I buy Photoshop from here?

  Hello

  I am from Bangladesh. I plan to buy photoshop and illustrator. But the name of my country (Bangladesh) not on the list. So how can I buy?

  If I select other countries is - illegal to use it in Bangladesh?

  You will need to get re seller getting Adobe Apps in Bangladesh.

  Please check:

  Home page | Tech Global One

  http://adobedealreg.force.com/PartnerSearch?lang=en

  http://shop.Daffodil-BD.com/index.php?route=product/category&path=17_116

  Please make sure that the seller re are certified by Adobe.

  Concerning

  Stéphane