I am trying to reinstall Windows Vista from my drive hard can u help me__

Similar Questions

• is shaded a d I canProblems installation of windows to date get the error code 80070490, tried to install windows vista from DVD upgrade areanot upgrade I can do?

  Windows update installation problems get code error 80070490, tried to install windows vista from DVD of the upgrade box is greyed out and I can't upgrade, any advise?

  Hi, Eve,.

  First run the preparation tool system update for your version of Windows.

  Start > right click on computer

  Select Properties

  Under system > Type system, you will see the 32 - bit or 64-bit system

  Download the tool for your system (x 86 is 32-bit, x 64 is 64-bit)

  http://support.Microsoft.com/kb/947821

  When finished, restart the update.  If the update fails, you will need to repair Windows.

  Your DVD says recovery?  This is the DVD, you will need to reinstall or repair Windows.

  What is the make and model of your computer.  The manufacturers provide a Recovery Utility in many cases.

  Ex: HP provides a Recovery Manager for their computers

  It is found by clicking Start > all programs > PC Help & Tools

  Click on Recovery Manager

  Follow the prompts on the screen to repair your computer

  How to automatically repair Vista using Startup Repair

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

• I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro Service Pack1 necessary

  I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro service pack 1 cd needed someone had this problem and managed to solve it thanks a lot

  Hello

  Thanks for joining us on the Microsoft Community.

  According to the description of the problem you are facing problems with reinstalling Windows XP Professional, and you are to be invited to insert the Service Pack 1 drive to complete the installation.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. did you uninstall Windows XP Service Pack 1 prior to reinstalling Windows XP?

  2. what was the installed Service Pack earlier?

  You may need to uninstall Windows XP Service Pack 1 first and then perform the reinstallation of Windows XP and to check if the installation goes smoothly.

  Please see the following articles for more information about uninstalling Windows XP Service Pack 1:

  How to manually remove Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329015

   

  How to remove folders from Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329260?WA=wsignin1.0

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• I'm trying to reinstall windows vista with the cd that hp sent me.

  I am trying to reinstall windows vista with the cd that hp sent me and he used to in stall, I had to have a new hard drive put in and I'm trying to put vista in and I can't help please

  If you have problems with the HP recovery disk, you will need to contact HP.

  This is HP Recovery Media, not Microsoft.

  HP Contact Info:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54

  My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.

  Hello

  The exact error message would have been very useful because it may be Malware.

  It may be a legitimate program.

  http://support.Microsoft.com/kb/174381

  http://www.fileinspect.com/FileInfo/MSDTC-exe/

  Would that be it: "MSDTC Console?

  And can be malicious:

  http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html

  It can be a boot entry remains of this Malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after the scan post back or if it was malware take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• How boot Windows Vista from a USB hard drive that has a good backup Vista already on him.

  Hi, initially, I thought I had a virus (blue screens that appear often), then I thought I had a corrupted driver or systems file. So, I had a 2 t USB external hard drive and saved ALL my internal hard drive.  After execution of all kinds of tests from my internal hard drive, it does NOT pass the diagnostic test and always stops in the same place on the internal hard drive.  It becomes harder and harder to start on my internal drive of 'C' without getting some kind of blue screen.  I'm sure that now it's my drive "C" which is declining and malfunction and I am convinced now to go forward and every time you start my existing backup Vista SP2 that I backed up on my disk 'K', or if I can, then do a new clean install of Vista 86 x (32 bit) on the disc 'K '.  My boot sequence is as follows: 1. Disc 2 DVD 3. External drive USB 'K' 4. Internal drive C (eventually when I get all fixed, I turn OFF my 'C' drive.)  When I boot my computer without my Vista disk, it bypasses the 'K' reader, because all the "loadup data" is located in a folder and are not exposed, or I don't have the files to "load" just in the right place.  When I look at the file config.sys and autoexec.bat copied, I see nothing in the files that would be "load" my existing Vista, instead he just goes right in front of the reader 'K' and on the 'C' drive and loaded a version own intalled my Vista (if I can avoid a blue screen, sometimes I have to load in "safe mode" and even) It doesn't work sometimes!)  My question is what the loadup files are needed and where on my 'K' drive (in system32?) to be able to restart my old copy of Vista which has all my existing configurations in place?  Thanks in advance for your help.

  Hello Mrbigbry,

  I found this thread which seems to discuss what you ask also:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/can-i-run-Windows-Vista-off-an-external-hard-drive/16c27e12-5ae1-4320-9533-613881633831
  There are some links in the response marked as an answer that may also be useful.

• I tried to reinstall windows xp from the operating drive after the removal of the original, but I continue to have problems I do not know much about pc'c

  Maybe I deleted Internet Explorer is it possible? Yes if the reason for which I cannot reinstall Windows XP? I have run from the cd, but more a step further. I removed the original in the hope to reinstall that my pc would be allowed again. Would appreciate any help.

  Hello

  Internet Explorer is part of the XP operating system that is located on the CD. It is on the CD and is installed as part of the installation process

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And follow this information to reinstall XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  See you soon.

• Stuck in a loop trying to reinstall Windows Vista

  Original title: computer turns off in the middle of the reinstallation of windows... Now, what gives the "Windows cannot complete the installation in Mode safe. To continue installing Windows, restart the computer "message.

  It is, when I restart it gives me the same message and it is an endless loop.

  Ive used a Recovery Manager.
  I do not have a CD and I have a HP Pavilion.  + Vista

  Any help, suggestions, solutions, advice will be greatly appreciated!

  solved... everything that I needed to do is press f 11 (I think) to re start the process

  Hi Nora,.

  Because you used the HP Recovery Manager to reinstall Windows, you should contact HP support for further assistance.

  HP support

• I tried to reinstal window vista 32 bit and I got the message as the status Ox0000017.

  My computer stopped booting because while I was in mode chkdisk I pressed the ESC key. Then trield to reinstall windows, but I could not. I have the startup options on the screen but none of them work it out. so please help me solve this problem

  If you have problems with the recovery of the manufacturer of the computer media, you will need to contact them.

  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If it is a Microsoft Vista DVD you use, here's a guide to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• I need to reinstall Windows Vista on a NEW hard drive

  I need to upgrade my hard drive a 500 GB to a 2 TB hard drive. I want to keep the old hard drive as what without having to format. I'll put it on in the case where I never need to access the data that's out there. I have the key Windows Vista Home Basic 32-bit disk and license. Is it possible to just install it on the hard drive again without any license validation error or the old hard drive must be formatted to remove windows. Desktop PC. Thank you

  Hello

  Legally, you must save your data > wipe this most hard > re - install your data, and then use this drive hard as you would normally use an external hard drive. namely for data only.

  One license is for a single installation.

  _______________________________________

  You can have activation issues with the new hard drive and reinstall anyway.

  If you do, then use phone Activation > do not follow Auto prompt > but brace yourself for a real person explain to the.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• I'm trying to reinstall windows vista. I opened the package that came with my Toshiba and it isn't a product inside key. Help, please.

  I broke the seal on the package and it doesn't have the product key inside as management on the State of the computer.  There are several codes outside of the package, but none of them work.  The seal have the CD number. VUT01.015 second line LD00800D000.  There is a sticker with W148629.  Barcode here 88222427124.  I bought the computer from Circuit City about 2 years ago.

  Help, please.  I need to reinstall Vista as soon as possible.

  I broke the seal on the package and it doesn't have the product key inside as management on the State of the computer.  There are several codes outside of the package, but none of them work.  The seal have the CD number. VUT01.015 second line LD00800D000.  There is a sticker with W148629.  Barcode here 88222427124.  I bought the computer from Circuit City about 2 years ago.

  Help, please.  I need to reinstall Vista as soon as possible.

  The product key is outside the body of the computer and, possibly, in the battery of your laptop.

• Satellite L300 - how to reinstall Windows Vista on the replacement HARD drive

  Hello

  My HARD drive has stopped working on my PSLB9E. He started making whirring noises and wouldn't start. all tests show it does not. Now I guess I need a replacement for HARD drive and watched a TOSH MK2565GSX or other similar. Problem is I can't find my Windows key anywhere.

  It is can get the key to Toshiba/Microsoft giving them all my contact information or do I have to buty a new HARD drive and install a copy newly purchased Windows on? If Yes, then I'll put W7 on I guess.

  Thanks in advance for any help I receive!

  SB

  > Problem is that I can't find my Windows key anywhere.
  The preinstalled Windows operating system and the image that is placed on the Toshiba recovery disc were already activated and therefore the serial key is not necessary.
  If you don t have the recovery disc, so you can buy this drive here:
  http://backupmedia.Toshiba.EU/landing.aspx

  It s not expensive; 30 euros I guess.

• Reinstall Windows Vista Home Basic

  How can I reinstall Window Vista Home Basic? I can't find a link to do it. How can I back up my files? Be deleted all my files by? Pl help.

  How can I reinstall Window Vista Home Basic? I can't find a link to do it. How can I back up my files? Be deleted all my files by? Pl help.

  Hey birch_2526

  There is no link of free and legal link for you to download vista basic to reinstall

  Contact your computer manufacturer and ask them to send a set of vista recovery disc

  they do it for a nominal cost

  and also ask them if you have a recovery partition on your hard drive to reinstall vista basic to how you bought your computer

  that will save you money if you don't have a recovery partition

  your hard drive will be wiped clean of everything during the resettlement process

  Back up all your data

  Read how to do this in the link below

  http://www.vista4beginners.com/how-to-backup-your-data

  Walter, the time zone traveller

• I need to reinstall Windows Vista to do a reinstall of Windows 7 upgrade?

  I have an Alienware Area 51 750i. He is initially provided with windows Vista but had a free upgrade to windows 7. My hard drive has acted lately and I think to replace. I have to buy a new drive for windows 7 or I can use my old copy and install it on the new hard drive. The computer came with a Windows Vista recovery disk and also the disk to upgrade to windows 7. Thank you

  You can reuse your Windows 7 license on the new hard drive. You need to reinstall Windows Vista on the new hard drive, and then perform a custom installation of Windows 7 during installation of Windows Vista. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us