I bought a used A1283. The screen is barely visible, and when I turn the monitor and it is clear for a 1/4 second then barely ther?
I just bought a used A1283. I took it to Best Buy to see if they could make me the administrator. They said that having seen lines vertically on 'their' screen and on mine as well. I never noticed at home only matter of freezing. They said that the graphics card is out? Now I have a scren for a millisecond until it's so dark I can barely read. When I turned off the moniter and then it's clear just for a millisecond, then dark? Help?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
Subject of memory NVRAM and PRAM
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
If no recovery (this is Lion or later) them start from the installation DVD instead
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
Or the installation DVD or Lion or later
However, I suspect a bad graphics unit. The graphics unit is soldered to the logic board and is not replaceable.
Tags: Mac
Similar Questions
-
I need to clarify how I can use adobe as a host for my site for free. I see where BusinessCatalyst is supposed to be temporary as it is recommended to use as the best alternative to launch my site of muse. But then I have to use the long extension of "businesscatalyst" in addition to the domain name, I would have preferred. Exactly how can I live? do I have to use a third party to accommodation?
Hello
Once you are done with your SeasonFive, click on publier publishing in Muse, select New Site from the drop down, it will ask for a name for your site, which will be used for the url of the site, you will get a url like mysite.businesscatalyst.com, then the browser and connect to the admin panel, mysite.businesscatalyst.com/admin and dashboard Click the launch site. This will push your live site, and then you can add your custom domain.
Also, make sure that you have performed all these actions mentioned here
Let me know if you have any question.
-
I just bought Photoshop 11. The serial number is not valid for out me of the trial.
I just bought Photoshop 11. The serial number is not valid for out me of the trial.
You must contact Adobe Support by chat or phone when you have the serial number and activation problems.
Here are some links to help get in touch:
-
I have windows XP product number on the label on the back for laptop, how can I get a copy of the CD, because I bought a used, the CD has lost.
Hi LaurenceWang,
If the installation of the operating system is the Original Equipment Manufacturer (OEM), you must contact them to get the CD.
Otherwise, contact Microsoft Supplemental and replacement parts in your area for a new CD.
For more information, see:
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
PS2 and Qosmio G20 - use of the monitor button, it just sounds
Could someone please help? Hooked my ps2 using the composite cable but when I press the monitor just button, it beeps and does nothing.
I know that the plug is broken can I get a picture through win DVR.
Any suggestions would be greatly appreciated. Thank you1. open programs, then
Improving the image-utilities-2 utilities. Toshiba
3 monitor the setings of entry
4. Select monitor IN or S video IN
5. apply the settingsEnjoy
min
-
Please, I bought a usedcomputor and the owner had under administrator, but has forgotten his password. Disables administrator so I can do an upgrade?
Hello
You don't say what operating system is installed.
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
This is information from Microsoft for when you forgot your XP password.
"How to connect to your Windows XP-based computer if you forget your password or if your password expires"
http://support.Microsoft.com/kb/321305
See you soon.
-
can I use a touch screen with photoshop CS6 and Windows 7
I need to define specific image areas to make a binary image of the organelles in an electron microscope of a cell. It would be much easier by using a pen as a mouse. Can I fix a touch screen to my computer monitor and use Windows 7 and Photoshop CS6?
Hello George,.
If I myself remember well touch sensitivity was introduced with Windows 8 and improved in point 8.1, so I doubt if a touchscreen monitor would work. You could easily use a graphics tablet, but enjoy the extra convenience of drawing on a screen with a science-based application.
Hope that helps
Terri
PS you have a name very famous Professor George Porter was an English Nobel Prize chemist a few years ago - I had the chance to go to one of his at the Royal Institution Christmas lectures, a very clever man.
-
Material: ZTE C open with Firefox OS 1.3.
Would it be a problem with the hardware, or something is wrong in the settings?
Thank you very much
ThomasHello
It's all applications! But the phone has a major problem, and I decided to return.
Thank you all for your help
Thomas -
Inspiron 8600 Dell screen-for 1 to 30 seconds then dark
My dell inspiron 8600 screen goes out after 10 to 30 seconds. When it is connected to an external moniter I get what would be on the laptop.
I also thought that I bought an extended warranty when I bought this fast response, which is the little explanation of how this works.
Thank you
-
so I have my button home broken for some time, not only does not respond as broken in the iPod so I couldn't press it or anything. It is only today that my iPod will not turn back. I normally would just hold the home button and the power button for some and things would turn out right away but now I can't use my home button so I'm stuck without options. I left that he plugged for a while but still nothing. I tried to clean the home button. So what should I? get a new home button or just get an upgrade anyway.
You could bring to the Apple store and let them to evaluate it. If an upgrade is financially feasible, I would recommend that you're not just fixing the home button will help. Also note that if you do any repairs on the iPod it will void your warranty (if you have one.)
-
I know there have been many on this black screen problem, but I just cann't fix thisI have tried some fixes, but nothing seems to help. Also, my system is 32 bit. I tried my understanding of System Mechanic pro, tuneup utilities 2012, Soluto.It, there is a timer that can be set, but I don't have an idea how doing this and don't want to spoil things more they already are. Anyone got good ideas without danger?
Hello
- The computer boots to the desktop after showing black screen?
- When the issue started?
- Were there any changes made to your computer before this problem?
Step 1: Start the computer in safe mode and disable your video card.
a. start in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
b. sign in your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
c. open the Device Manager: http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager
d. in the list of categories of equipment, expand the category of display cards. Take note of your graphics card.
e. right click on your graphics card and then click on disable. Confirmation prompt, click Yes.
f. close all open windows and restart your computer normally.
If you can see your desktop, then there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.
-
How can I get the window 'Remember password' to show for more than 2 seconds?
Many hotels offer wifi access with a good and an ID that you enter each time that you connect. Firefox easily stores the ID and the password so I don't have to worry about finding the right, but the gate of the hotel displays a pop up right after login. At the same time, Firefox offers to save the password and the popup is the prompt of password remember disappear.
I can can this setting somewhere or get the prompt back?
I'm never fast enough to click "remember password".
Thank you
ChrisThis happens on all websites, or just this one?
If there is a key icon located on the left side of your address bar, you can click this option to open the password prompt again.
If there is no key icon in the address bar, it is most likely because the site is configured to redirect to another page or a domain. Once you are redirected or navigate to another page, the password dialog box will disappear.
Unfortunately, if this is the case, nothing you can do, as the redirect is probably in the codes of the Web site. The only option would be to try to stop the redirection Web site by clicking on the button stop in the address bar.
You can also try temporarily turning the accessibility setting that prevents the redirection of Firefox Web sites. This can be changed from the advanced settings in the page options, on the general tab.
Let us know if it works.
Note: If you stop the redirection page, you probably to reload the page after you have saved the password, in order to allow the site load the appropriate content. If you turn on the warn me when forwarding setting, you will need to disable this feature, after you save this password, so that the website to function properly.
-
I have a problem with the Windows Explorer. When I left click on the taskbar Task Manager indicates that explorer.exe is running, but deletes then after a few seconds. I can right-click in windows Explorer and select any file frequent or pinned and who opens, okay, right click in windows explore does not work. I clicked the windows Explorer and checked the properties that appear to be identical to my second PC that is also running windows 7 and works very well. I also open the location of the files and tried to launch explorer.exe in c:\windows which gives the same result. Can someone help me please.
Hello
Welcome to the Microsoft answers forum.
I suggest you perform the clean boot.To perform a clean boot on a computer that is running Windows Vista, follow these steps:
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
When you are prompted, click on restart.
After the computer starts, start the program or game and see if the problem is resolved.
http://support.Microsoft.com/kb/331796You can also perform a full scan of your computer, please visit this link:
http://OneCare.live.com/site/en-us/default.htm
You can also try running sfc scan, follow these steps:
1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2. type the following command and press ENTER:
sfc/scannowThe sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions
http://support.Microsoft.com/kb/254649You can also check in safe mode, please visit this link:
http://windowshelp.Microsoft.com/Windows/en-us/help/d063548a-3fc9-4723-99f3-b12a0c4354a81033.mspx
Thank you and best regards,
Azam - Microsoft Support -
I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.
I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?
I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.
> very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.
> except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.
Thanks in advance for your help :)
Do restore of the system as a first step. If this fails,
1. uninstall all software of Monitor 2
2. unplug the monitor 2
3. restart the computer
4. connect the monitor 2
5. install all the software monitor
-
When I connect AS400 and use SHIFT + f9 screen to do at night.
* Original title: shift + f9
Hello
I bought lenovo with window 8. I use the VPN client with AS 400 and to get the command-line on AS400, I had used on my key position previous computer + F9 which supposed to be F21. But when I connect AS400 and use SHIFT + f9 screen to make night and it does not matter, I use only F9 or shift + F9 screen to night and back but I can't control line. Help, please
Hello
Please contact Microsoft Community.
Since you have a problem with the VPN connection, this question is better suited for Microsoft TechNet Forum so I suggest you to send this request in Microsoft TechNet Support Forum, follow the link below.
Hope this information was helpful and let us know if you need more assistance. We will be happy to help.
Maybe you are looking for
-
Pavilion N0X12AV 550-150qe: 550-150qe pavilion N0X12AV model add extra internal hard drive
The motherboard (pegatron s memphis) there the additional SATA card and power supply (300 watt) has the ability to add something like a Seagate Barracuda 7200.10 HD? I called support and was tossed to 4 people and they could not answer these question
-
is it possible to use the front panel without installing Labview?
Hallo, I have two quick questions: 1. is it possible to use the façade of a labview software without the need to install Labview itself? I mean something similar to the "power point viewer" that can display Power Point files without installing micros
-
Range of printers HP C4860/driver installation problems - no driver? / will not scan
Yesterday, after some small problems printing and indications that there may be a driver problem, I reinstalled the full software and drivers from the HP website. When installing to the step where you plug in the usb cable, the software would not re
-
Unable to get the computer out of safe mode
Remove my computer in Mode safe and return it to a Normal Mode * original title - get my computer out of safe MODE and return to a NORMAL MODE. I almost tried everything and I hate the thoughts to start over and lose all my info computers *.
-
can I remove my computer MicrosoftOffice without him having a bad effect on my computer
I CAN JUST AFFORD THE ACTUAL USE OF THE MICROSOFT OFFICE PROGRAM THAT WAS PREINSTALLED ON MY SONY VAIO WITH WINDOWS 7, IT TAKES UP A LOT OF TIME DOWNLOADING DATES ETC, CAN I UNINSTALL THIS PROGRAM OR IT WILL AFFECT OTHER THINGS ON MY COMPUTER, I'LL B