I bought the Windows Anytime Upgrade, but the software will not be installed.

Help... I bought the Windows Anytime Upgrade on Microsoft Office software to my Vista laptop, but the software will not be installed. Operation message is not supported on this platform. How to get around the facility? I have the product key number, but can not get so far to enter.

I think that you bought the right product. Updates at any time are for the upgrade edition of Windows 7 to a more expensive edition. This isn't what you need to upgrade a Vista system to Windows 7. While Vista upgrades are no longer available from the Microsoft Store.

I suggest that you return to the Microsoft Store site and use the contact methods to discuss your problem with an agent.

Tags: Windows

Similar Questions

  • Photosmart Premium C309-g: the drivers and the printer software will not be installed.

    My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

    A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
    ~ Nelson Mandela

    Welcome to the HP Forums @GarfieldFan1969,

    I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

    First step: clean boot, restart the PC and try the install again.

    1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
    On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

    2. now, choose Selective startup

    3. Remove the check of the Load Startup items

    4. click on the Services tab

    5. check "hide all Microsoft Services" and then click on disable all

    6. click apply , then OK

    7 restart the PC and temporarily disable firewalls or antivirus programs

    8 run the Installation Wizard for Windows HP printer to install the printer

    9 turn on the firewall and start services

    Second step: you unregister and re-register the Windows Installer Service:

    1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
    2. at the command prompt, type msiexec /Unregister , and then press ENTER.
    3. at the command prompt, type msiexec/regserver, and then press ENTER.
    4. at the command prompt, type exit and press ENTER to close the command prompt.
    5. run the Wizard for Windows HP printer installation

    Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
    1. go to start
    2. type CMD
    3 right-click and run as administrator
    4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

    You may need to run this upward to 3 times to solve all the problems

    When finished, it will say one of three things
    Windows did not find any breach of integrity (a good thing)
    Windows resource protection found corrupt files and repair the (good)
    Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

    Try to reinstall the printer.

    Step 4: activate the built-in Windows administrator account

    source

    1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

    Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

    2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

    3. now type the following command:

    NET user administrator / Active: Yes

    4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

    (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

    You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

    Try to reinstall the printer.

    Testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

  • online purchase of windows anytime upgrade, you selected is currently not available error?

    bought two identical from best buy with hopes of windows 7 premium-64 bit laptop. I have win 7 Professional, so I tried to use the windows anytime upgrade. one successful. a fails. overlook a request for information (name address, phone, etc.) of the billing and you request then click next to go on the payment. I got the error:

    an error has occurred:
    for the windows anytime upgrade online purchase, you have selected is not available.

    No rememdy or suggestion what is wrong. I can go back to portable sister and run the Upgrade Advisor to ultimate just to rule out connectivity issues.

    someone had this problem and got around him?

    Call Microsoft at 1-877-696-7786 . Carey Frisch

  • The HP OFFICEJET 4620 series software will not be installed! HELP windows 7

    Hi, the CD and online software will not install on my windows 7. I've lived all the troubleshooting and carnt find any solution. The message arrives as - ' year error occurred while installation wrighting on the disk. ". Check to make sure space is available and click Retry, or Cancel to end the installation.  I checked the disk space and there are 13.7 GB of free space. I also have deleated temporary files and the trash of emptyed. Also, I did a full virus scan anti.  I hope someone can help?  Thank you

    Hi Davies22,

    There is something in the laptop Toshiba, the origin of the problem, you see, and because the printer works fine on other computers, you will need to contact Toshiba support for the issues you have on the laptop. The only other option you have is to back up your data on this laptop and then run a full system restore which will put the cell phone to the way it was when you bought it all first.

  • Operating system. We have first Pro CS6 and Windows 7 32 bit. It will not be installed

    Dell laptop Latitude 6420

    Windows 7 Professional

    8 GB Ram

    A user in PR must use Adobe first Pro CS6. However, when we tried to install the program is grayed out and displays a warning icon. If I hover over there is a message that says that he prefers the 64-bit. Rather not say will not work in my opinion. However it will not be installed.

    I read that first Pro is 64-bit on another web site. Is this true? There must be a solution.

    On the Adobe site, I saw that the installation of CS4 first was the work around, but you must purchase a license key. We have already purchased the Premier Pro and have no money in the budget to buy an old product when it should work.

    Help, please. I'm under a lot of pressure to solve this problem

    James

    Premiere Pro CS6 is a 64-bit software and will only install on a 64-bit computer. There is no way around that.

    64-bit Windows required. After Effects and Premiere Pro CS5.5 and CS6

  • I am trying to install Photoshop and I've done it before. but now, it will not be installed. I get the following message (see below).

    I get this prompt "error opening installation log file. Ensure that the specified log file locatio exists and is writable. "I have to reinstall Windows install?  If so how to do that?

    Troubleshoot Windows install

    2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    Substitute:

    Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

    1. in the menu 'Start', click on ' execute:.»

    2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

    3. in the menu 'Start', click 'run '.

    4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

    If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

    For more information, visit the below mentioned link:

    http://support.Microsoft.com/kb/290301

    ------------------------

    Click Start Orb, in the box, type search: Regedit.

    Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

    Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  • Why the software will not install?

    I just bought Adobe Photo Shop Elements 8 and try to install it on my new Windows 7 computer.  After I insert the disc in the drive, it gives me a list of files.  There are no instructions, no wizard to install it...  I can't access this file, I can't save it in order to get help.  I can't get to first base.  I checked to make sure autoplay is located.  Can someone help me?

    It seems you accidentally bought the version of PSE 8 Mac and you try to install on the Windows machine.

    Try to go back to the seller or Exchange it somehow with the version of Windows or buy a new copy for PSE 8 Windows. Then, you'll be good to go...

    Kind regards

    Ankush

  • Once the effects will not be installed! Help!

    Hello

    My legacy is crashed and I removed the software. When I started the installation program, it gave this error:

    Exit code: 15

    Please see specific errors below for troubleshooting. For example, ERROR: DW051...

    -------------------------------------- Summary --------------------------------------

    -0 fatal Error (s), 2 error (s)

    ERROR: DW051: dependence of session support {4817D846-700B-474E-A31B-80892B3E92E3} DVA Adobe After Effects CS6 11 has changed.

    : Error Media DB: 6

    -------------------------------------------------------------------------------------

    Please help me!

    Update:

    I fixed it instead of clean files ae I cleaned all the adobe files only so that the program works fine now! thnx everyone for the support!

  • FixIt to solve problems but still updates will not be installed

    I tried several times to install the critical updates, nothing helps. I also tried to use the FixIt on several occasions. Still, it detects and solves problems, but the updates always fail to install.
    Help would be appreciated.

    Product Update Status Date Source
    Windows XP Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353) Sunday, February 19, 2012 Microsoft Update
    Windows XP Update security for Windows XP (KB2661637) Sunday, February 19, 2012 Microsoft Update
    SQL Server 2005 Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) Sunday, February 19, 2012 Microsoft Update
    Windows XP Update security for Windows XP (KB2660465) Sunday, February 19, 2012 Microsoft Update
    Windows XP A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516) Sunday, February 19, 2012 Microsoft Update

    Hello


    You get an error code when the Windows updates fail?

    Perform the steps in the article mentioned below and check if the problem persists.

    http://support.Microsoft.com/kb/822798

    Hope this information helps.

  • Windows XP with Virtual PC mode will not be installed / two problems

    Hello!
    I have Windows 7 Pro (64 bit) and I want to follow the instructions here:

    https://www.Microsoft.com/Windows/Virtual-PC/Download.aspx?runGenuineCheck=true&system=5&lang=4&ButtonClicked=winXpMode

    to install and run Virtual PC so I can see if some legacy XP software I have will work.

    FYI, I use a Lenovo W520 laptop with an i7 to 2.4 ghz with 8 GB of RAM.

    I followed step 1/2 and downloaded the file of 500 MB for Windows XP Mode.  I installed it.

    : #1 there is a note at the bottom of the page that says "once you have installed Windows XP Mode, click the Windows 7 start button, then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation." For more information about how to configure Windows Virtual PC and Windows XP Mode, see "Running Windows XP Mode with Windows Virtual PC" on page Support and videos . "

    I am looking at the view of all programs and there is absolutely nothing that says "Windows Virtual PC" or "Windows XP Mode".  I look at the programs and features in the control panel and indeed, Windows XP mode is installed (and taking up 1.13 GB).  I have uninstall and re-download the 500 MB file and reinstall it.  It is not always appear in the sight of all programs, does not add an icon to my bar quick launch or desktop or anything that suggests a way to start.  It is located in C:\Program Files\Windows XP Mode, but there is no executable file it.

    Problem #2: Step 3 says "Download Windows Virtual PC".  When I click on this button, the download starts, but never works (I tried several times, notably after a clean reboot, with nothing other than the execution of Internet Explorer); I get an error window that says:

    Windows Update Standalone install

    Setup has encountered an error: 0 x 80070422

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    What's not?

    Thank you.

    Notes; After the announcement of this issue, some Associates questions skipped upward and I read through them.  Points of a post on this forum-> http://www.sevenforums.com/tutorials/8247-windows-xp-mode-install-setup.html , which suggests that the #2 problem is my problem because I followed along until ste #5-E and then I get the error message 0 x 80070422.

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

    http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  • I have a XP W my last PC installation disk and I recently bought a Zoostorm PC no BONES. Why the XP will not be installed?

    As in the title, tried to install XP on my new PC. Started OK with partition disk etc. and got to the real Windows Installer screen which seemed OK progress until it reaches install will finish in 35 minutes. page, then it froze and BSOD appeared. I tried a number of things suggested by Zoostorm, IE changed the bios SATA to IDE settings and also ran memtest for RAM errors. Found nothing, but still get BSOD. The XP disc would be defective?

    What is the BSOD?

    Here's a BSOD example showing information you provide:

    http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

    Send for the nose and the Red arrows (3 to 4 lines total).

    Send all * line STOP message since there are clues in the 4 parameters.

    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we know what your BSOD looks like.

    If there is a name of the file listed in the STOP message, don't forget to include that too.

    Instructions courtesy of elderberry.

  • Widows Vista Home Premium, the updates will not be installed: Codes error 8004FF01 and 641

    Never had a problem of update until this week.

    Tuesday, may 8, 2012 update batch:

    KO 2690729
    KO 2691905
    KO 2604111
    KO 2604121
    KO 2656405

    These results in error codes

    8004FF01

    and

    641

    Run automated programs fixit, tried unsuccessfully Setup patches.  Lost, lost, lost.

    Hello

    ·         Are you looking for Services or Msconfig?

    ·         You get a specific message to Windows Installer?

    Thanks for the reply, you have tried the troubleshooting steps in the previous answer. If the steps described in the previous post, you can follow the steps mentioned below:

    Method 1:

    Run the system preparation tool to update from the link and if the problem occurs:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    Method 2:

    If the previous step fails run the System File Checker tool to repair corrupt Windows file. Follow the steps in the link:

    http://support.Microsoft.com/kb/929833

  • Support of the software will not enroll in CUCM 9.0

    Deployment of a test with license demo installed on CUCM 9.0 (9.0.0.99101 - 22). PSG, CFB, ANN and MOH will be not. Cisco IP Media Streaming Voice App is running.

    Disabled/enabled/restarted services, server rebooted, no change. Newspapers using RTMT tire and it shows an error of license, but ELM server licensed.

    Any ideas?

    14:10:27.046 HDR | VoiceStrm, StandAloneCluster, 10.x.x.x, Error, 9.0.0.99101 11/12/2012-22
    14:10:27.046 |   PITrace: * ERROR * [CHRISTIANE INFO]: platform install api isDeployedStandalone() = true
    14:10:27.046 |   PITrace: * ERROR * [CHRISTIANE INFO]: platform install prods api [0] = CallManager
    14:10:27.046 |   PITrace: * ERROR * [CHRISTIANE INFO]: Configuration platform of the box: 0 (CCM:0, UNIT: 1, carrots: 2, unknown: 3).
    14:10:27.046 |   PITrace: * ERROR * Important info only, category [DBMon]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.046 |   PITrace: * ERROR * Important info only, category [Cisco Tomcat]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.046 |   PITrace: * ERROR * Important info only, category [CallManager]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [LBM]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [CmiManager]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [CtiManager]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [Cisco Media Streaming App]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoEM]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoWebdialer]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoIPMA]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [DRIVE]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [Cisco TFTP]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [CiscoAXLWebService]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * Important info only, category [RISSystemAccess]: productid_enable_flag = 1 system_enable_flag = 1
    14:10:27.047 |   PITrace: * ERROR * [IMPORTANT INFO] AppCrashCheckBase::AppCrashCheckBase() is the RW_Process_Mutex: / dev/shm/Category_CiscoMediaStreamingApp_Mutex_crash_checker

    14:10:27.047 |   PITrace: * ERROR * [IMPORTANT INFO] AppCrashCheckBase::AppCrashCheckBase() acquire the successful lock. : errno = 0; strerr = success
    14:10:27.047 |   PITrace: * ERROR * [INFO] WriterSideCheck () open IMPORTANT existing flag_check_mmf to the left of the final run. : errno = 17; strerr = the file exists
    14:10:27.047 |   PITrace: * ERROR * [IMPORTANT INFO] ExAppCrashCheck::WriterSideCheck() create/open flag_check_mmf succeeded! : errno = 17; strerr = the file exists
    14:10:27.047 |   PITrace: * ERROR * {Debug information}: look on the side of the writer, writer crashed last time: true
    14:10:27.047 |   PITrace: * ERROR * CPICategory::loadXmlFile() category: xmlfile [Cisco Media Streaming App]: [/ usr/local/cm/conf/MediaAppPerfmon.xml]
    14:10:27.049 |   PITrace: * file ERROR * CPIClass::createMMF() MMF: [/ Category_CiscoMediaStreamingApp_PIClass_MEDIAAPP_GLOBAL_OBJECT_MDB] is started. (no error)
    14:10:27.049 |   PITrace: * ERROR * ExObjectUpdateTracker::ExObjectUpdateTracker::_synchronizeMAP() m_nIndex m_nRoundCount: 0 m_nTick: 0
    14:10:27.049 |   PITrace: * ERROR * [IMPORTANT INFO] name of the category: Cisco Media Streaming App file: /usr/local/cm/conf/MediaAppPerfmon.xml enbled_flag: 1
    14:10:27.049 |   PITrace: * ERROR * [IMPORTANT INFO] Add ITraceObj to the name of the category: Cisco Media Streaming App, tid:1306 l
    14:10:27.049 |   PITrace: * ERROR * [IMPORTANT]: statsInit() enable_flag = 1
    14:10:32.180 |   CIpVMSMgr::MgrThreadProc * ERROR * No valid license found
    14:11:32.192 |   CIpVMSMgr::MgrThreadProc * ERROR * No valid license found

    Thank you!

    Hi hhbalfour,

    First of all, don't know why you use an intermediate version of 9.0. You must use a version of FCS such as 9.0.1.10000 - 37. Second, it looks like this are IPVMSA newspapers that you shot? There is an internal fault for the errors you see:

    CSCtz44498    Characteristic SW license no longer exists in Kirra 9.0

    Symptom: MOH serves not registered. No Conf Brodge. Conditions: Fresh INstall Only. Workaround: N/A (the fix - the check for the SW Feature license needs to be removed) 

    Fixed in versions:

    009.000 (001.10000.037)

    009.000 (000.99121.003)

    I suggest you to install 9.0.1.10000 - 37 who should have a fix for this problem.

    HTH.

    Kind regards
    Stefano.

  • You just bought a new computer, Firefox, but Firefox Synch will not sync with my other computer for bookmarks.

    Two laptops have the same version of Firefox update.

    Nevermind, I guess... Suddenly, Firefox is now show bookmarks from another computer. FYI to all, it took more than an hour of synchronization, and during this time, there was absolutely NO indication to me that what was actually happening. That's why I created that, initially. Firefox, there SHOULD really be some sort of recognition by the user that the synchronization is truly something. Thank you.

  • The extension "Guide" does not contain a valid signature. The extension will not be installed.

    Hi guys, looking for some help because I can't install an extension for Photoshop. Managed to install it on a machine in the office and it works very well.

    Data sheet:

    iMac OSX 10.8.4

    Photoshop CC

    The CC extensions Manager

    Please let me know if you need anything that anyone else.

    I've GuideGuide 2.1.3 successfully installed in the same environment as your. I guess you used the same version of guide. Have you updated to the latest version of the CC extensions Manager? Could you try to uncheck the option 'Allow the extensions Manager to access the Internet' in the Preferences dialog box, and then install it again?

Maybe you are looking for